Alyvos ir vandens separatorius be filtravimo elemento

Kaeser Aquamat CF75

Gamybos metai: 2017, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 4066, The cost-effective drainage solution for condensate from your compressor. The oil is separated from the water using a filter set. Bsdpoqmmvcefx Agdjdi The filter set is included in the scope of delivery. The treated water (only when using the filter set) meets the requirements for discharge into the sewer system. Warranty and liability are excluded in this listing. Price on request.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread 2x safety clamps Pneumatic foot switch Bdsdpfx Agsh U Damjdsi Table size: 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Gamybos metai: 2017, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 4068, The cost-effective drainage solution for condensate from your compressor. The oil is separated from the water by means of a filter set. The filter set is included in the scope of delivery. The treated water (only when used with the filter set) meets approval standards for discharge into the sewer system. Warranty and guarantee are excluded in this listing. Price on request. Bsdpfxjqmmvrs Agdodi

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 680 kW (924,54 AG), aušinimo tipas: oras, Įranga: aušinimo blokas, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9+25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Output depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow: 162,500 / 131,000 m³/h Motor power input: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise level: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully operational. Bdjdpfxjvllxdj Agdoi

Būklė: naujas, Gamybos metai: 2025, Dry rotary vane vacuum pump. Available in stock. Brand new pump. Comes with a 12-month warranty. Nominal flow rate: 25 m³/h at 50Hz. Ultimate vacuum: 150 mbar abs. Bdedpjftzpvsfx Agdoi For any questions, please contact us.

Gamybos metai: 2009, būklė: geras (naudotas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 • Max. package width (mm): 1250 • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 Bdsdopu Anmepfx Agdoi • Total connected load (kW): approx. 5

Gamybos metai: 1990, būklė: geras (naudotas), Compressor system with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Height: 1000 mm Bedpfx Agsinur Aedsdi Flow rate: 1.5 m³/min Power: 11 kW

Būklė: naudotas, Aušinimo agregatas, aušinimo vandens grįžtamasis aušintuvas, vandens aušintuvas, chilleris O. Hellwig Pagaminimo metai: apie 1995 m. Aušinimo galia: apie 8 kW Nominali aušinimo agregato galia: 3 kW Šaltnešis: R422D Vandens talpa: apie 35 litrų Cirkuliacinio siurblio našumas: 40 litrų/min Siurblio galia: 0,63 kW Vandens jungtys: 1/2 colio Bdodpfepu R Ncex Agdoi Energijos tiekimas: 380 V, 50 Hz - Temperatūros nustatymas per sukamą potenciometrą Užimamas plotas (I x P x A): 1100 x 750 x 140 mm Svoris: 285 kg

Būklė: naujas, Gamybos metai: 2025, Efektyvūs šaldymo įrenginiai su R290 – oru aušinami, patikimi, draugiški aplinkai. Mūsų modeliai apima našumo intervalą nuo 20 iki 800 kW ir siūlo lanksčias galimybes su arba be laisvojo šaldymo. Privalumai: Aplinkai draugiškas šaltnešis R290 su mažai šiltnamio efektą sukeliančių dujų potencialu Oru aušinami, su vidiniu siurbliu ir talpa Pasirinkimai: su laisvuoju šaldymu (naudojant lauko orą papildomam šaldymui), sumažina elektros suvartojimą, ypač vėsiu metų laiku Našumo skalė nuo 20 iki 800 kW, pritaikyta jūsų poreikiams Bdedpfefqllwjx Agdei Modernus valdymas Individuali konsultacija, planavimas ir parinkimas Pristatymo laikas priklauso nuo versijos ir komplektacijos Tvari eksploatacija dėl mažų CO2 emisijų ir žemų eksploatacinių sąnaudų Mielai pakonsultuosime, kuris sprendimas jums optimalus.

Būklė: naujas, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Cutting length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Outrigger table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Bdsdpfsd N S T Dsx Agdji Motor output S1 100%: 5.5 kW (7.5 HP) Motor input S6 40%: 7.5 kW (10.0 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight approx.: 850 kg Scope of Delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Length stop flaps • Outrigger table with roller • Push stick • Independently driven scoring unit • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double roller carriage with central and end position lock for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Outrigger table with roller for easier handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Supplied as standard with separately driven scoring unit (motor power 0.75 kW) • Robust saw unit with double-sided pivot elements made of cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the outrigger table, infinitely adjustable from 90° to 45°