Ventiliatorius

JKF JK-30D 5,5 kW LV RD 90 L

Gamybos metai: 2026, būklė: naujas, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal particles Pipe diameter: 180 mm Available immediately Codpecqvhxefx Aahjgp Location: Ex stock 54634 Bitburg

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Cgjdpfofyadbjx Aahep Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1”. YOUR BENEFITS - Accessible from 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Offset longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle: 140 / 160 mm Cedpfx Aajdqzhbjhogp Required extraction capacity: 1,500 m³/h Negative pressure at nozzle at 22 m/s: - 1,000 Pa at DN140 mm - 700 Pa at DN160 mm Adjustable working height: 735-1,015 mm Work surface (W x L): 946 x 1,500 mm Dimensions (W x L): 1,000 x 1,600 mm Weight: approx. 73 kg

Būklė: naudotas, Outer dimensions: Width/Height: 65 mm Length: 2600 mm Weight: 70 kg Cgsdeb N Nd Uopfx Aahep

Būklė: geras (naudotas), Gamybos metai: 1990, Ruloninio metalo išvyniojimo, pjovimo ir vyniojimo linija LTs. Linija 1300 mm/3 mm. tiksliam pjovimui. Skirta išvynioti, pjauti metalą, supjauti į mažesnius rulonus, suvynioti į mažus rulonus. Linija pirkta nauja, vieno savininko, laiku prižiūrėta LTs atstovų. Staklės yra prijunktos ir galima, bet kada išbandyti Vilniuje. LTs 1300/3 pjovimo liniją sudaro: Išvyniojimo dekoileris Kelių ašmenų žirklės Stabdymo ir atskyrimo segmentas Cgedpfx Aepbwapsahjp Suktuvas su separatoriumi Vežimėlis Spinta su valdymo pultu Techninė specifikacija: Metalo plotis: 1250 mm. Storis: 700 mm. Skersmuo min.: 508 mm. Skersmuo maks.: 620 mm. Išorinis apskritimo skersmuo: 1200 mm. Maksimalus svoris: 7 T. Nupjautų juostų plotis min.: 75 mm. Nupjautu juosto maks. plotis: 1250 mm. Maitinimo įtampa: 3 x 380 v. Galia: 18 kW. Pagaminta: Lenkijoje. Jei turėsite daugiau klausimų, mielai atsakysime.

Būklė: naudotas, Radial fan, centrifugal fan, radial blower, chip extraction blower, fan, extraction system, chip blower, high-performance fan, metal chip extraction blower - Radial fan: Metal chip extraction blower with wear-resistant liners - Motor: EMK type EC2-HS160M2-2 - Motor power: 15 kW / 2935 rpm - Inlet connection: Ø 150 mm - Outlet connection: Ø 150 mm - Base plate: 580 x 470 mm - Overall dimensions: 930/820/H1220 mm Cedpfsrh Niaex Aahsgp - Weight: 395 kg

Būklė: geras (naudotas), Exhaust fan Motor: 11 kW Cgsdpjgmnvyjfx Aahsp Extraction capacity: 10,000 m³/h Pipe dimensions: see photos Used, immediately ready for operation

Gamybos metai: 2006, būklė: naudotas, Dosing rotary valve, rotary airlock, dosing airlock, rotary valve for screw conveyor, auger conveyor, screw feeder, conveying technology, tubular screw conveyor -Manufacturer: Schäffer, rotary valve type 035102D11ST with drive -Drive motor: SEW-Eurodrive 0.37 kW -Speed: 1380 / 11 rpm -Inlet opening: 200 x 200 mm Codpol A Azkefx Aahegp -Outlet: 200 x 200 mm -Overall dimensions: 1120/300/H300 mm -Weight: 117 kg

Būklė: naudotas, Hydraulic punching machine, punch frame for use with punching units JOKA type HP-S Hydraulic hole punch, hydraulic press for punch brackets Year of manufacture: approx. 1995 Press force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Maximum punching unit width: 54 mm Maximum punching unit installation height: 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use of JOKA punching units SW 20 or SWD 20 - Throat depth of the punching units can be larger, units can be pushed through to the rear - Stroke release via electric two-hand operation - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - Mounted on a mobile frame Csdpfxjltrmue Aahjgp Space requirement (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Gamybos metai: 1998, būklė: naudotas, Technical details: Total power requirement: 1.1 kW Airflow rate: 900 m³/h Filter surface area: 6.0 m² Filter: 1 unit Approx. machine weight: 125 kg Dimensions (L x W x H): 0.74 x 0.62 x 1.8 m Areas of application: Extraction of grinding dust; with alternative filter inserts, also suitable for welding fume extraction - mobile unit on casters - with coarse particle collection bin - cleaning interval adjustable up to 60 sec. - pulse cleaning, automatically activated after the unit is switched off - filter separator Further technical specifications: - Separation area: 6.0 m² - Separation efficiency: over 99% - Cleaned air remains in the workspace - Cartridge filter inside the unit: Ø 400 mm, length 270 mm - Filter replacement by hand (service door) Cgodpou N Ad Nsfx Aahop