Skaldos ištraukimo ventiliatorius

EMK 15 kW / 2935 U/min

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm Itedpfxjirax Uo Ab Nei - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: naujas, Lakšto storis 0,8 mm Itodoht R Hmopfx Ab Noi Iškyša 180 mm Mašinos svoris apie 22 kg Reikalinga vieta apie 500 x 450 x 160 mm Rankinė mašina komplektuojama su: - 8 vnt. ritinėlių komplektų

Būklė: naudotas, Gamybos metai: 1997, 3 linijos Stenner MHS9 staklės iš 1997 metų Itsdpew Nrhkefx Ab Nei

Gamybos metai: 2026, būklė: naujas, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Itodpfocqvhxex Ab Noi Hinged door for easy removal of metal particles Pipe diameter: 180 mm Available immediately Location: Ex stock 54634 Bitburg

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg Isdpfx Abefyadbj Noti

Būklė: dilaminuotas dirbtuvėje (naudotas), galia: 30 kW (40,79 AG), bunkerio talpa: 800 l, darbinis plotis: 800 mm, Slow-speed shredder, 800 x 1000 mm feed hopper, 30 kW motor, Iodpswzg Tasfx Ab Njti hydraulic pusher, reversible knives

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Parduodamas didelio formato vienos ašies Vecoplan smulkintuvas. Rotoriaus skersmuo: 370 mm, darbinis rotoriaus ilgis: 1300 mm, apsukų skaičius: 120 aps./min, peilių eilių: 37, peilių matmenys (X/Y): 40 mm / 40 mm, padavimo angos matmenys (X/Y): 1400 mm / 1300 mm, bunkerio tūris: apie 3 m³. Įrenginio matmenys (X/Y/Z): 3200 mm / 2400 mm / 1500 mm, svoris: apie 5500 kg. Galima apžiūrėti vietoje. Iodpsyddyzjfx Ab Nsti

Būklė: naudotas, Gamybos metai: 2013, veikimo valandos: 14 h, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, bendras plotis: 1 500 mm, bendras ilgis: 3 000 mm, bendras aukštis: 2 500 mm, slėgis: 2 800 juosta, darbinis slėgis: 2 800 juosta, kuras: dyzelinas, bendras svoris: 3 000 kg, sukimosi greitis (min.): 700 aps./min, sukimosi greitis (maks.): 1 500 aps./min, aukšto slėgio žarnos ilgis: 60 000 mm, paskutinio kapitalinio remonto metai: 2025, Įranga: sūkių greitis be galo kintamas, High-pressure/Ultra-high-pressure Waterblast Machinery for Sale, Company Closure due to Retirement: - 2 × 250 kW plunger pump units, 20 & 40 kpsi / 1,400 & 2,800 bar operating pressure, diesel engine driven, dump-type system. - 2 × 110 kW plunger pump units, 20 & 40 kpsi / 1,400 & 2,800 bar operating pressure, diesel engine driven, dump-type system. - 1 × 110 kW plunger pump unit, 40 kpsi / 2,800 bar operating pressure, diesel engine driven, dump-type system. Complete with a vast variety of accessories and spare parts: dump guns, floor cleaners, bundle cleaners, nozzles, barrels, tools, etc. For sale. For export only. Package of 5 UHP Water Jetting Units, with Extensive Range of Spare Parts and Accessories, as Follows: Itedpfx Abexc E Trj Nei - 1 × high-pressure water jetting unit with Deutz-MWM V-8 diesel engine - Infinitely adjustable pressure: 0–1,400 bar and 0–2,800 bar, dump-type system, with interchangeable plunger kit as follows: - 1,400 bar at 99 l/min - 2,800 bar at 46 l/min - The high-pressure head, including bushings and valves, remains unchanged at both 1,400 bar and 2,800 bar. Pressure range is changed between 1,400 and 2,800 bar by a simple plunger swap. - The unit was built in 2013 and kept in operation as a backup machine, but only used once, for 14 hours at 2,800 bar, for a heat exchanger cleaning project. The UHP unit is mounted on a galvanized steel frame. - The Deutz-MWM engine was purchased used with approx. 3,000 operating hours and equipped in 2013 with a new Jetech UHDW high-pressure water jetting pump. - Also included is a large quantity of accessories and spare parts, such as dump guns & foot pedals, swivel joints, rotary couplings, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. - An identical UHP water jetting system is also available, fitted with a Scania V-8 engine (850 operating hours), 1,400 bar / 99 l/min max. This unit also includes plunger swap kits for 1,400 bar / 99 l/min and 2,800 bar / 46 l/min. Unit is housed in a 20-foot container with an 800 l diesel tank and a workbench/vice. - In addition, 3 more high-pressure water jetting units with 110 kW power each are available, 2 of which have interchangeable plunger kits for 1,400 and 2,800 bar. The third unit is a Kamat K11000 with 2,800 bar operating pressure. - Also available: hydraulic heat exchanger cleaning device with rotating lance, mounted on a scissor lift table, suitable for very large heat exchangers. All equipment is being sold due to company closure for retirement. A buyer for all equipment and accessories as a complete package is sought. For export only.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 1 500 kW (2 039,43 AG), bendras svoris: 1 800 kg, stalo ilgis: 2 500 mm, stalo plotis: 1 300 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, This laser cutting machine is capable of processing sheet metal with a thickness of 3–4 mm. The Wattsan 1325 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. The working area measures 1300 x 2500 mm. The precision Wattsan 1325 E is equipped with feed rollers that facilitate material loading. The E-series laser metal cutter has a maximum traverse speed of 80 meters per minute. The laser output can reach up to 1.5 kW. The machine bed is made of steel. For further information, feel free to contact our sales team! Wattsan 1325 E Specifications: • Working area: 1300 x 2500 mm • Laser output: up to 1500 W • Weight: 1620 kg Virmer offers not only premium machinery, but also comprehensive service and delivery. Our engineers and sales representatives are ready to answer all your questions and provide video support if needed. Additionally, owners of Wattsan equipment benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. We supply not only laser engravers but also metal cutting machines, welding units, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continues to improve based on customer feedback. Thanks to these inputs, Wattsan has implemented over 50 upgrades, making the machines more reliable, precise, and powerful—so you can take your business to the next level. YOU CAN CALL OR WRITE TO US! WE'LL HELP YOU FIND THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for an ideal laser or CNC milling machine, we are happy to assist. Iedpfxjiicw Ee Ab Noti We offer a wide selection of laser systems and accessories: CO2 laser machines; metal laser cutting machines; laser metal cutters; fiber metal lasers; fiber laser engraving machines for metals; CNC metal milling machines; woodworking milling machines; CNC milling machines; laser engraving machines; laser engravers; laser cutters for plywood; laser engravers; laser metal cutting machines; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; and mirrors for laser systems.

Gamybos metai: 1995, būklė: labai geros būklės (naudotas), 3 vnt. Sulzer MB 40-160/5 išcentrinių siurblių Našumas: 32 m³/val. Pakėlimo aukštis: 147 m Iodsd Sybpspfx Ab Noti Maksimali temperatūra: 130°C Sandarinimas: Mechaninis sandariklis su užtvarinio vandens tiekimu Variklio galia: Siemens 22 kW Sukimosi greitis: 2950 aps./min ! Kaina už vienetą !