Lentos padavimo sistema

Jacksteel

Būklė: geras (naudotas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Total length: 26 meters Gedpfsgw Scqox Al Noud 1st bin: 2 meters 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Also see my other listings. I look forward to your inquiry.

Būklė: naudotas, Gamybos metai: 2023, Used Plant Gedpfoyk I U Asx Al Nsud Year of Manufacture: 2023 Condition: as new, plant has only a few operating hours Equipment and Technical Data: - Stationary Clean Air Extraction System ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Explosion relief surfaces: 0.84 m² (bursting discs) - Base frame with discharge chute and rotary valve Dry discharge with C-coupling Comprises: - ECO JET DUO 6 UPPER PART, 2 x 7.5 KW: Clean air extraction unit; 2 x 7.5 kW fans; AL-KO OPTI-JET filter cleaning; incl. explosion relief panels and dry discharge with C-coupling; without filters and controls; incl. pressure switches - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expanded volume or increased unit height with 2 suction inlets for suction nozzles - Lower frame with discharge chute and built-in rotary valve 960/1 FG: For chip disposal via user-provided transfer fan to existing silo or similar Transfer duct DN 200 mm, approx. 1,260 mm in length under the rotary valve, connection to transfer duct provided by user Rotary valve certified according to ATEX Directive 94/9/EC Technical Data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit indoor/outdoor operation); EX D (protection system); FSA 11 ATEX 1614X Mounting power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/housing: IP 54 / B3 Insulation class: F Speed: 41 rpm Capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category "M" – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backflow damper 910X346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; corresponding power modules and controls as well as frequency converter included in base unit; The frequency converter is built into the control cabinet Cascade control with frequency converter handover: Fan 1 operates on the frequency converter; when threshold is reached, switching to mains operation; Fan 2 takes over the frequency converter and regulates as required; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 controller, Sitop Power power supply, group fault message Display of fault messages in plain text on the display and group fault indicator lamp in the door Manual discharge start via display button Start filter cleaning via differential pressure Manual start of filter cleaning via button Post-cleaning Monitoring of fire pro...

Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 926 h, bendras aukštis: 1 800 mm, bendras ilgis: 11 250 mm, bendras plotis: 900 mm, Spalva: pilka Svoris: 1 500 kg Kaina: pagal užklausimą - Pagaminimo metai: 2012 - Dokumentacija prieinama: Ne - CE žymėjimas: Taip - CE sertifikatas: Ne - Serijos numeris: 546324 - Darbo valandos: 926 - Pagrindinio variklio galia [kW]: 7,5 - Maks. pjūklo juostos ilgis [mm]: 7209 - Maks. pjovimo plotis [mm]: 300 - Maks. pjūklo disko skersmuo [mm]: 500 - Veleno pjūklo disko skersmuo [mm]: 85 - Padavimo stalo ilgis [mm]: 7850 - Išleidimo stalo ilgis [mm]: 2400 - Parinktys: automatinė padavimo sistema - Įtampa [V]: 400 - Elektros suvartojimas [A]: 22 - Saugiklis [A]: 25 - Galia [kW]: 11,0 - Transportavimo matmenys: 11250 mm x 900 mm x 1800 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 1500 kg Finansinė informacija PVM: nurodyta kaina be PVM Gedpjyna Ezefx Al Noud PVM skirtumo apmokestinimas: PVM atskaitomas juridiniams asmenims Pristatymas ir keitimas galimi bet kuriam pramonės sektoriaus įrenginiui Yorick Diebels

Gamybos metai: 1997, būklė: geras (naudotas), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Guedpfx Ajt S Sxgsl Ned Drive via gear motor

Būklė: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Gsdpfx Asv Si Szol Nsud Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Būklė: naudotas, Gamybos metai: 2010, veikimo valandos: 13 800 h, galia: 1 600 kW (2 175,39 AG), For sale are 3 MTU cogeneration units / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These systems are ideally suited for decentralized energy generation and combined heat and power applications. Key technical data as per documentation: * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas consumption: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: Gjdpfxsyt H H Nj Al Nsud * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h According to the documentation, the scope of supply also includes extensive auxiliary equipment and system accessories, such as: roof-mounted air cooler, auxiliary cabinet, control cabinet, flue gas heat exchanger, water heat exchanger, piping and ductwork with chimney, oil room with 3 tanks and piping, as well as electrical cabling. These units present an attractive option for operators, resellers, and projects in energy supply, industry, or for spare parts utilization.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Söderhamn småstockslinje med Euromill profiler Barkmaskin Cambio 45 med inmatning och styrverk efter 2D-skanner Söderhamn 447 inmatning 240-12 spånskallkantmaskiner Klampväxlare och inmatning 240-12 spånskallkantmaskin Euromill profiler Gujdjwp E E Depfx Al Nsd Brädavskiljare med ställbart centrum Spåntransportör under såglinje Hydraulenheter och elskåp.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, PRIBO PATERNOSTER SUDĖTUVAS PASIŪLYMAS APIMA 1. PROBO IŠEINAMASIS KONVEJERIS SU DEŠINIOJO KAMPO PERDAVIMO KONVEJERIU. 2. PRIBO Q1020 PATERNOSTER SUDĖTUVAS. 4. 2X AUTOMATINIAI PADĖKLŲ ŽURNALAI 1200MM. MINIMALUS ILGIS APIE 1900MM. MAKSIMALUS ILGIS 4500MM. Guedpfoy Hb Upex Al Nsd PAKETO PLOTIS 1200MM PAKETO AUKŠTIS 1200MM MAKS. TALPA 5 SLUOKSNIAI PER MINUTĘ TINKA SUDĖTI PO FORMAVIMO STAKLIŲ, KRAŠTŲ PJOVIMO, PERPJOVIMO, DET IR KT.

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Airflow: 13,600 m³/h, Pressure increase: 3,100 Pa, Speed: 1,500 rpm, Motor power: 18.5 kW, Weight: 790 kg, with STBB HAB S chip container, including complete documentation. Gujdpfx Alji A Ix He Nod

Būklė: labai geros būklės (naudotas), Direct drive Airflow: 12,000 m³/h Negative pressure: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Godpfx Aoh Tfqhsl Njud Inlet diameter: 400 mm Outlet diameter: 400 mm Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Used machinery notice: • Technical data subject to error and prior sale. • Quoted prices are ex works - loading included! • The machine has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to enquiries which include your address and telephone number!)