Šiukšlės / šalinimas

Iveco 50C15 DAILY GUIDA DX VASCA RIBALTABILE PER RIFIUTI

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Nsdpfx Aeu Thbxjduodd Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: nepatikrintas (naudotas), Hydraulic press for pressing paper and similar materials. The machine was fully operational prior to disassembly. Press dimensions: Length: 4850 mm, width: 1370 mm, height: 3000 mm (reducible to 2300 mm). Weight approx. 3500 - 4000 kg. Njdpfx Adsh Nyfyoujdd For further information, please contact: +48 539 660 495.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, galia: 1,5 kW (2,04 AG), Tria plastic mill, shredder, granulator for sale in excellent condition Make: TRIA 20-15/BL-T Power: 1.5 kW, 50 Hz, 380 V Year of manufacture: 1997 Nsdpfxera N A Ns Adujdd Feed opening: 200 x 230 mm Rotating knives: 3 pcs Fixed knife: 1 pc Discharge opening: 60 mm Final product size: 3–5 mm Capacity: approx. 30 kg/h.

Sąlyga: geras (naudotas), Comprising: - 3 tanks of 18,000 litres - 3 tanks of 15,300 litres - With walkway system - Material: AISI 316 - Square discharge door (bottom) Nedpfxsib H Dds Adusdd - Motorised pomace discharge - Round manway DN 400 (cylindrical section) - Residual drain, ball valve Ø 40 Friedrich No. 2 - Clear drain, ball valve Ø 40 Friedrich No. 2 - Sampling device - Recirculation line with ball valve Ø 40 Friedrich No. 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with integrated strainer cylinder insert (for wetting the pomace cake) Dimensions: - 3 tanks, 18,000 litres: Ø 2000 mm, height 5600 mm - 3 tanks, 15,300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 10460, 5-blade rotor 2 rows of stator knives Rotor diameter: 400 mm Working width: 600 mm Nsdpfx Asghgg Uodujdd Inlet cross-section approx. 500 x 600 mm

Sąlyga: naudotas, rida: 269 785 km, galia: 107 kW (145,48 AG), pirmoji registracija: 03/2012, kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 4x2, darbinė masė: 6 500 kg, didžiausias leistinas svoris: 2 500 kg, tuščias svoris: 4 000 kg, padangos dydis: 225/75 r16c, ratų bazė: 3 450 mm, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: plienas-oras, krovinio erdvės tūris: 7 m³, mašinos/transporto priemonės numeris: 72703, Įranga: ABS, imobilaizerio sistema, oro pagalvė, priešrūkiniai žibintai, trauki kontrolė,

Sąlyga: geras (naudotas), bendras svoris: 5 100 kg, kuro tipas: dyzelinas, kuras: dyzelinas, Gamybos metai: 2005, MANUFACTURER: ATLASCOPCO MODEL: XAS426 Ndedpfet Srw Aox Adusd SERIAL NO.: YA3-062854-50542371 YEAR: 2005 POWER (kW): 166 CAPACITY (m³/min): 25 PRESSURE (bar): 7

Sąlyga: naudotas, Gamybos metai: 2001, veikimo valandos: 72 218 h, HD reciprocating compressor, manufacturer Atelier Francois, type: CE68C40SG, 510 rpm, 45 m³/min, 40 bar, 418 kW, complete with Römer compressed air receiver, 1000 l capacity, 45 bar, year of manufacture 2001, 72,218 operating hours, decommissioned since 12/2023. Nedpfx Aotvmr Usdusdd

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 10461, 3-blade rotor (offset blades) 2 rows of stator blades Rotor diameter: 300 mm Ndjdpfjghgg Rjx Adusd Working width: 600 mm Infeed opening approx. 440 x 600 mm

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 170 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, bendras svoris: 40 000 kg, alyvos bako talpa: 3 000 l, paskutinio kapitalinio remonto metai: 2024, For sale is a used bale press system comprising an underfloor chain belt conveyor with feed hopper, a hydraulic pre-compactor with an agitator, a MACPRESSE 111A baler, two complete wire feed rack units with five spool holders each (no wire included). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific compaction force: 14 kg/cm² Feed hopper dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Nominal throughput: 750 m³/h Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Wire tying: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/h, material dependent Hydraulic tank volume: 3,000 L Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and function-tested upon completion, as shown in our demonstration video. Previously, the line was used for baling paper and cardboard from municipal collection. As the contract was awarded elsewhere at the end of the term, the complete system is now for sale. A detailed photo documentation and our offer outline all performed refurbishment work and the installed new spare parts. Full documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing is possible by appointment. No liability will be accepted for technical data or potential errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Loading belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Overall length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive shaft height above floor: 5,777 mm Ndedpfx Adsu Th D Rousd Side wall height, loading belt: 500 mm Side wall height, incline belt: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor, manufactured in 2017, was custom built and installed for the baler during its last installation in the Netherlands. The conveyor is in good, ready-for-use condition and has not been overhauled. An installation drawing with pit dimensions is available. Scope of supply: - 1 unit chain belt conveyor, Wagensfeld B.V. - 1 unit feed hopper with pre-compactor flaps - 1 unit agitator - 1 unit MACPRESSE baler, type 111A - 2 units wire feed racks with wire spool holders, without wire - 1 unit operating manual with CE declaration, electrical and hydraulic schematics