Mobilusis vyniotuvas, LEONARDO SP

ITALDIBIPACK LEONARDO

Gamybos metai: 2022, Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, LEONARDO incorporates all the features of the compact yellow stretch robot LEO, such as a minimal operating radius of just 750 mm around a pallet, a compact design, and motorized drive. Additionally, it offers an electronically controlled film brake, up to 100% motorized film pre-stretch, and a patented mast, allowing a wrapping height of 2,350 mm while maintaining a total height of only 1,560 mm in standby mode. • Compact design: only 75 cm required • Suitable for pallets up to a maximum height of 2,350 mm • Patented telescopic mast, adjustable from 1,560 mm (standby) to a maximum height of 2,350 mm • Electronically adjustable film brake, up to 100% motorized pre-stretch • Patented electro-manoeuvre system reduces operating area compared to other robots • 6 freely programmable programs (memory) • Wide touch belt • Electric steering control • Maintenance-free battery (2 x 12 Volt) • Integrated charger: 220 Volt Pallet dimensions: Length: min. 600 mm / max. unlimited Width: min. 600 mm / max. unlimited Height: min. 500 mm / max. 2,350 mm Film thickness: from 8-30 microns Pallet weight: min. 50 kg Machine dimensions: • Height: 1,560 mm (standby) • Length: 1,066 mm • Width: 738 mm • Weight: 195 kg Lhedjih Sriepfx Af Ieb Drive battery: 24 V Built-in rapid battery charger: 230 V Warranty: 12 months (single-shift operation)

Sąlyga: geras (naudotas),

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 55,4 kW (75,32 AG), bendras svoris: 2 050 kg, kuro tipas: dyzelinas, spalva: originalus, ašių konfigūracija: 1 ašis, darbinė masė: 2 050 kg, tuščias svoris: 2 050 kg, kuras: dyzelinas, Technical Data: Round timber up to 24 cm Feed width 300 mm Base weight approx. 2050 kg Year of manufacture: 2022 4-cylinder Hatz turbo diesel engine With common-rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo diesel engine, 55 kW (74.8 HP), with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Tow bar with overrun brake Front jockey wheel Rear support stand Lighting according to German StVZO (impact protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed and thus chip size Chopping knives resharpenable multiple times for long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic infeed Particularly grippy, aggressive, and uniform feed, each roller powered by its own hydraulic motor Discharge chute with adjustable spreader flap, swivel-mounted Ledpfx Aov Evx Usf Ijhb Discharge chute on ball bearing turntable Relevant machine parts with sound insulation Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, produces 55.4 kW (75.3 HP). Automatic industrial freewheel clutch between engine and chipping disc protects the engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis, approved by TÜV, for speeds up to 80 km/h. Sturdy, fixed steel mudguards. Provisions for front jockey wheel and rear support stand. Height-adjustable tow coupling with overrun brake and soft dock ball hitch or DIN towing eye. Lighting as per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Foldable feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): width = 1,160 mm, height = 1,040 mm. Swiveling discharge chute with adjustable spreader flap. Discharge chute on ball bearing turntable for flexible orientation. Sound insulation on relevant machine components, such as the chipper hood and discharge chute. Emergency stop button located on top of the hopper and on the side of the hopper flap. Chipping System: Safety circuit compliant with EN 13525. Chipping disc with a diameter of Ø 800 mm and a thickness of 40 mm. Closed knife system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable multiple times for long service life. Horizontal counter blade can be used 4 times; vertical counter blade can be used 2 times, for extended service life. Wrap protection at the main bearing of the chipping disc. Hydraulic Feed: Infeed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic infeed for reliable and consistent material transport. Parallel guide for the upper roller ensuring even feeding without skewing. Hydraulically adjustable feed speed for controlling chip size. Level indicator for the hydraulic oil tank.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006835, Type of attached edge: thin edge, thick edge Lhjdpfxjrl Utbe Af Ijb Post-processing unit: yes Max. panel height: 55 mm

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, The ultimate symbol for pallet wrapping machines is the robot: easy to operate, versatile in its applications, and highly productive, making it the ideal solution for businesses of all types. Our state-of-the-art robots are purpose-built to meet a wide range of packaging requirements. Designed for agile movement in all industrial environments, these units can wrap a pallet in less than a minute and secure even light, fragile, deformable, and irregular loads. Minimum pallet size: 600x600mm Maximum pallet height: 2,200mm Ljdpfx Aor Nc Swef Iehb Minimum pallet weight: 45kg

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Our mobile wrapper is one of our demonstration machines, in good condition, with minor scratches on the housing and chassis. Comes with a 12-month warranty, fully inspected and serviced. Optional accessories such as a wide sensing belt are available on request. Key advantages at a glance: - Operating area of just 750 mm around the pallet - Extremely compact design - Patented steering system - Requires up to 40% less space compared to its competitors - Very easy to operate - German customer support - Upgrades available later as optional features The LEO only needs 75 cm (approximately shoulder width) around the pallet to be wrapped. OPERATING RANGE Pallet dimensions: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / no limit Width: min. 600 mm / no limit Machine dimensions: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (lower on request) FILM DATA Wrapping programmes: - Bottom and top wrapping - Cross and one-way wrapping - with stop for top sheet application Max. film width: 500 mm Max. core diameter: 76 mm Max. outer diameter: 220 mm MACHINE DATA Voltage: - Battery: 2x 12 Volt - Integrated charger: 220 Volt - Drive: 2x 24 Volt - Film carriage: 1x 24 Volt Lodpfxshfc Rio Af Ishb Film carriage: - Separate parameters for upward and downward movement - Mechanical film brake - Continuously variable adjustment Control: - Touchscreen with digital display - Quick select buttons - Drawbar with navigation buttons - Pallet detection via sensing belt - Emergency stop switch - 6 programmable working modes - Double collision protection Mast: Stationary design Weight: 195 kg ADDITIONAL FEATURES - Height detection via photocell - All drives via chain - Suitable for wrapping black products or using black stretch film (optional) - Acoustic and visual warning signals - CE marking Wrapping black products or use of black stretch film is possible. The machine can be charged using any standard Euro plug cable in a 230V household socket. Such a charging cable is, of course, included in the scope of delivery.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 615 mm, bendras aukštis: 555 mm, bendras ilgis: 850 mm, obliavimo plotis: 330 mm, aukščio reguliavimo tipas: mechaninis, obliavimo aukštis: 156 mm, drožlių pašalinimas: 3 mm, sukimosi greitis (maks.): 9 000 aps./min, obliavimo peilių skaičius: 36, įėjimo įtampa: 230 V, padavimo velenėlių skaičius: 1, PS33 with Spiral Cutterhead • Innovative design and powerful motor. • Material removal up to 3.2 mm. • Infeed & outfeed tables. • Double-knife cutterhead with double-sided knives. • Front-mounted indicator shows material removal. • Planer head with reversible knives. • No dust extraction system required thanks to integrated fan for chip evacuation from the cutterhead. • Depth stop with seven positions for repeat thickness planing at the same height. • Maximum workpiece width up to 330 mm. • Model: PS33 • Recommended use: Tradesmen/Professionals • Input power (230 V): 1.8 kW • Cutterhead speed: 9,000 rpm • Cutterhead diameter: 46 mm • Number of indexable inserts in cutterhead: 36 • Insert size: 15 x 15 x 2.5 mm, R=150 • Feed rate: 7.9 m/min Lhodpfxsvncu Ij Af Ijb • Max. depth of cut: 3.2 mm • Max. planing width: 330 mm • Max. planing height: 156 mm • Min. workpiece length: 120 mm • Extraction: Integrated fan, 62-mm extraction port or dust bag • Sound level: 96 dB • Machine dimensions (L x W x H): 340 x 615 x 555 mm • Dimensions with tables extended (L x W x H): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (L x W x H): 415 x 660 x 545 mm • Package weight: 39 kg Included in delivery: • 36 carbide indexable inserts (pre-installed in cutterhead) • 5 spare carbide inserts and screws • Dust bag for chips and dust • Connection kit for dust bag • Torx key (TX25) for changing inserts

Sąlyga: naujas, bendras svoris: 3 500 kg,

Sąlyga: geras (naudotas), Gamybos metai: 2008, Professional packaging machine from a renowned European manufacturer: - Suitable for adhesive tape widths up to 50 mm. - Maximum carton dimensions according to manufacturer: width 500 mm x height 500 mm; length unlimited. - Double-sided sealing of packages, both top and bottom. - Different carton sizes are adjusted for height and width using hand cranks. - Conveyor speed approximately 20 m/min. Throughput approximately 800 cartons per hour. Lhsdotndq Iopfx Af Isb - Working height of the machine is continuously adjustable. The machine is mobile and can be fixed in place using lockable castors. - Documentation includes operating manual, spare parts lists and circuit diagrams.

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 19 584 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 943883, bendras svoris: 1 455 kg, keliamoji galia: 180 kg, rankos pasiekiamumas: 3 300 mm, This is a KUKA KR 180 R3300-K industrial robot, year of manufacture 2010. We are pleased to offer this robot to you fully overhauled upon request! Ledpfx Aeti Afcjf Iehb The robot comes with the following options: UserTech