Profilių plieno žirklės su strypų plieno žirklėmis

INDUMASCH 55 HY

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, darbinis plotis: 1 300 mm, gerklės gylis: 410 mm, atstumas tarp stulpų: 960 mm, darbinis greitis: 20 mm/s, atbulinės eigos greitis: 20 mm/s, bendras svoris: 3 600 kg, bendras ilgis: 2 740 mm, bendras plotis: 2 140 mm, bendras aukštis: 2 317 mm, įėjimo įtampa: 200 V, spaudimo jėga: 36 t, darbinis ilgis: 1 300 mm,

Sąlyga: geras (naudotas), Gamybos metai: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically adjustable support rolls Intelligent software features: - Ellipse program - U bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis Hfsdpjvd Dftefx Af Ijb Shaft diameter: 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Approximate dimensions: Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all critical details independently.

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Control: Minipos 807, year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Hodpfjgf H Sasx Af Isfb Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Sąlyga: labai geros būklės (naudotas), Pagaminimo metai: 1991 Modelis: ITPS III Serijos numeris: ITPS 80C 25 P1C226 Maksimali presavimo jėga: 1800 kN Darbinis eiga: 115 mm Maitinimas: 415 V, 50 Hz, 3 fazės Nominali srovė: 119 A Įdiegtas galingumas: 18,5 kW Staklių svoris: 4940 kg Inventorinis numeris: 9.14 Hfodpfx Afswq Dpqo Ieb Valdymas: Delem DA-65R Staklės įsijungia, tačiau valdymas nereguoja į komandas. Ankstesnis naudotojas pakeitė originalią AMADA valdymo sistemą į DELEM.

Sąlyga: naudotas, Lenkimo ilgis: 3100 mm Slėgis: 80 t Variklio galia: 5,5 kW Alyvos talpa: 100 l Hedpfjru Unbox Af Isfb Konvencinė lenkimo staklės: 3100 x 80 t Mechaninis galinis atmušėjas

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Technical Data: Sheet length: 4,100 mm Sheet thickness: 6 mm Distance between columns: - mm Hfjdpfx Ash Ib T Uef Iob Total power requirement: 15 kW Weight approx.: 11.5 t Dimensions (LxWxH): 5250 x 2300 x 2215 mm Backgauge: 1000 mm D-Touch 7 Touchscreen CNC control, user-friendly central cutting angle adjustment Ball screw, 1000 mm & automatic swing-up Support balls on the table for improved material handling Side gauge with scale & T-slot and swing stop Support arms with T-slot and swing stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE-standard for EU The machines can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.

Sąlyga: geras (naudotas), Gamybos metai: 2002, From business closure: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Hfodpfx Afot Iklkj Iob Max. punching and shearing capacity: 1,000 kN Punches 31 mm holes in 25 mm steel Shears flat bar up to 500 mm length with a material thickness of up to 18 mm steel Contact length stop included A wide range of accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Sąlyga: naujas, Pressing force: 40 t Bending length: 1270 mm Clearance between uprights: 980 mm Hsdpfxegiud Hs Af Isfb Throat depth: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions (L x W x H): approx. 1950 x 1450 x 2100 mm Weight: approx. 3200 kg Accessories / Special Features: • Manual control for motorized depth adjustment and backgauge o Ball screw spindles o Fine adjustment via handwheel • Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly offset, R=0.8 mm, pressing load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backgauge with ball screw spindles, length = 600 mm • Single working speed of 10 mm/s for all vertical movements—no light curtain required! • Front support arms • Pendant control panel • Paint finish: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033 • Operating manual • CE compliant Delivery time: approx. 2–3 months after receipt of order plus pre-shipping charges China – Germany Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Sąlyga: naudotas, Combined Section Steel Shear and Punch GEKA Type HYD 80 / Hydracrop 80/A Machine No. 9566 Year of manufacture approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Stop with electric stroke release, 500 mm - Worktable with stop at punching station: 550 x 380 mm - Working height at punching station: 1100 mm - Worktable with stop at rectangular notcher: 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 assorted punching tools Hfsdpfxjrz Tutj Af Iob - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke Hfjdped N H A Nefx Af Ieb - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition