PUSIS EDGE BANDER (kairėje)

IMA Advantage 500 L

Būklė: naudotas, mašinos/transporto priemonės numeris: 007986, Maksimalus skydo plotis: 1000 mm Maksimalus skydo ilgis: 2000 mm Konvejerio ilgis: 3500 mm Įvedimo sistema: su stūmikliais. Hedpfx Ajx A Tggsn Hou

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Hedpfx Anoiidm Ne Hou Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Panel Saw HOLZ-HER 1255 SECTOR pro - Ex-Demonstration Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience with a robust design, delivering an exceptional price-performance ratio. Your advantages: - Fully welded frame for exceptionally high rigidity Hedpfx Ansu R Syij Hsu - Precise cutting quality - Ready-to-glue cut edges for immediate edge banding - High-torque saw motor with 4 kW power - Space-saving panel cutting with a footprint from as little as 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE countries - option): Workplaces must meet the highest standards of health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Accessories The extensive range of accessories includes everything from convenient digital measuring displays to our patented Super Cut plus scoringsystem. TECHNICAL DATA Vertical panel saw for cutting sheet materials such as chipboard, MDF panels, veneered boards, multiplex, etc. Base machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/aggregate for accurate cuts. Manual feed for vertical and horizontal cuts. Maximum cutting depth: 60 mm Saw Beam: Stable saw beam guided on precision rails. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in the vertical cut. Saw Unit: Effortless, ergonomic operation for engaging and disengaging the saw unit. The plunge lever can be folded away in the upper position for precise engagement. Generously sized levers ensure easy pivoting. The housing cover opens the entire saw unit for simple tool changes, including ProLock quick-change chuck. Viewing Window: Riving knife can be retracted. Control Panel: Efficient machine control ergonomically positioned at eye level. Bottom Workpiece Support: Robust, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through. Extraction: Effective dust extraction with two connections: saw unit Ø 120 mm, frame end Ø 100 mm (with TRK version) Lifting Roller Transport System: Manually raiseable/lowerable rollers for easy and gentle panel transport. Measuring Tape: For horizontal cut measurement with three manual displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel This offer includes an equipment package. The following items and options are included in the price: - Sliding grid - Longitudinal fence, manual for vertical cut - Digital measuring display for horizontal cuts - 3 adjustable stops in the saw beam - TRK extraction unit SH 2,200 - Strip stop for recurring horizontal cuts - New ex-demonstration machine -

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, galia: 5 kW (6,80 AG), pjovimo aukštis (maks.): 200 mm, pjovimo plotis (maks.): 1 300 mm, pjūklo disko skersmuo: 550 mm, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis ties tiesiniu vedliu: 1 300 mm, stalo ilgis: 3 200 mm, Exhibition machine F 45 Elmo Drive - Tilting + / - 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm - Digital angle crosscut fence 3200 mm L - CNC rip fence 1300 mm Hodpsuh R R Eefx An Hsu - Manual duplex miter fence 1350 mm - Template holder - On/off switch on double roller carriage - Front support roller

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), SMS MEER CNC-Doppelseitige Anfasmaschine Hersteller: SMS MEER Hjdpfx Aeghrgujn Heu Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohrdurchmesser Ø 21,3 – 114,3 mm Wandstärke: 2,3 – 11 mm Länge: 6–12 m Die Anlage besteht aus zwei RFA14-Anfasmaschinen mit Transportvorrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Innen- und Außen-Anfasen beider Rohrenden. Das Rohrbearbeitungsspektrum umfasst einen Durchmesserbereich von 21,3 bis 114,3 mm und eine Wandstärke von 2,3 bis 11 mm bei einer Rohrlänge von 6 bis 12 m. Die Fördertechnik im Bereich der Anfasmaschinen dient dazu, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu transportieren.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Cutting area: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring saw unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame Hedpfx Anoyx H Dto Hsu • Precision manufacturing of machine components to 1/100 mm • Massive, self-supporting, solid-welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch multiplex plywood with integrated small-part support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of center support • Automatic roller locking during the sawing process Saw Beam • Sturdy, durable saw beam steel construction • Automatic saw beam locking with interface detection Saw Unit • Play-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced convenience thanks to largely automated operation • Laser-assisted indication of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy changeover to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control System • 12" touchscreen computer with optimal user guidance • Multilingual operation guidance • Tool database ensures high flexibility and absolute repeat accuracy • Fully automatic saw cycle • Infinitely variable feed speeds 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • USV 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning ASP Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design & Ergonomics • Typical STRIEBIG product design • Multiple awards (including Design Prize Switzerland) • Functional and user-optimized ergonomics Installation • Wall-mounted or free-standing installation possible

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 0-241-06-5232, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 12 608 h, pjovimo aukštis (maks.): 125 mm, pjovimo plotis (maks.): 2 200 mm, pjovimo ilgis (maks.): 4 300 mm, Plokščių pjūklas Holzma HKL11/43/22 Maks. pjovimo plotis: 4300 mm Maks. pjovimo ilgis: 2200 mm Maks. pjovimo aukštis: 125 mm Pjūklas yra nuolatinėje eksploatacijoje, tad galima apžiūra darbo metu. Įrenginys bus prieinamas nuo 2026-03-02. Hodexfvp Ajpfx An Hsu

Būklė: naujas, Gamybos metai: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with discharge function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, and integrated distance control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer tape, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. - 3 free slots for finishing units - 10" color touchscreen Machine length: 4030 mm Workpiece thickness: 8 - 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4 – 3.0 mm Pre-milling unit cutting depth: 0 – 2.0 mm, stepless Total installed power: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with air-blast device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with discharge function - Surcharge for diamond tools, height = 65mm, for pre-milling unit - Riepe spray device (anti-adhesive) at pre-milling unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° elbow + hand slider, mounted on machine, D = 200 mm Availability: short-term Location: Hochheim Hodpfxow I U Dro An Hsu

Būklė: naudotas, mašinos/transporto priemonės numeris: 007848, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing unit: yes Multi-function unit: yes Max. feed speed: 20 m/min Maximum panel thickness: 60 mm Hsdpfx Anewkrqpo Hsu Working units: 8 pcs

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Hjdpoi Hn Srjfx An Hou Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)