Infraraudonųjų spindulių kietinimo krosnis plėvelių kompozitams

IBT Infra Bio Tech GmbH Infrarot Aushärteofen

Manufacturer
IBT.lnfraBioTech GmbH
Item no. 3200 0088

Technical Data
Condition: as new; scarcely used for test series
Functionality: fully operational
Year of manufacture: 2018
Connected load: 58 kW
Cooling capacity, water connection (on site): 30 kW
Conveyor belt length: 7,000 mm
Conveyor belt width: 310 mm
Infeed height: 55 mm
Infeed width: 308 mm

TECHNICAL DETAILS
Application: Continuous oven for curing processes in film bonding technology
Component temperature: max. 100°C
Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm
Total height without control cabinet: 2000 mm
Control cabinet (WxDxH): 1200 x 600 x 2100 mm
Base frame made from stainless steel profile tube, height-adjustable: ± 30 mm

Conveyor system
Vacuum conveyor belt made of silicone, belt width 310 mm
Transport speed: max. 5 m/min
Conveyor belt height: 950 mm ± 30 mm
Openings infeed/outfeed (WxH): 308 x 35 mm
Clear infeed area: approx. 750 mm
Clear outfeed area: approx. 750 mm

Gjdpfx Abjwnm Ukjdsil
Conveyor belt operation:
Continuous, adjustable up to max. 5 m/min,
Straight tracking regulation centered on rollers, with light barrier safety system at infeed and outfeed. Loading and unloading is manual.

Intended Use
The curing oven is a belt system designed for continuous feed operation with a maximum feed speed of 5 m/min. There is an open area at the infeed and outfeed for manual loading and unloading of components. In between is the enclosed heating section with 6 IR modules (height-adjustable). The component temperature reaches a maximum of 100°C and is used for heating solvent-free adhesive between film laminates. The belt’s return section, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held on the transport belt by vacuum. The control cabinet is separate from the machine and located outside the cleanroom.

The system operates in a cleanroom per EN ISO 14644 Class 8 and is manually loaded and unloaded by an operator. The system is exclusively used for heating film laminates.

Equipment
- 6 adjustable infrared heating modules, each with 6 infrared emitters
- 6 pyrometers for precise temperature monitoring
- PU conveyor belt for efficient material flow
- Integrated control and regulation system
- Height-adjustable stainless steel base frame
- Vacuum conveyor belt
- Cooling water distribution in the base frame (G1”)
- Water cooling in the belt return and on the rear sides of the IR modules
- Mechanically interlocked service doors
- Operator panel mounted on the left side of the infeed
- Control cabinet cooling unit, water connection on site

History
This oven was intended for use in a cleanroom environment and was only used minimally for a test series. The oven was employed for curing solvent-free adhesives between film laminates.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.