Oro kompresorius

Hydrovane HV04

Sąlyga: naujas, AGRE ALUP ALLEGRO 14+ 13 270 Variable speed. Space-saving. Cost-effective. Efficient 1:1 direct drive. Simple operation. Low energy consumption. High performance. Suitable for a wide range of applications. Superior compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Variable speed control with frequency inverter Controller: Graphic controller C55DD Refrigerated dryer: Integrated, refrigerant R513A Filtration: including cyclone separator Tank: horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26–2.26 m³/min Operating pressure min. / max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil quantity: 5.2 l Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm Kwedpfoixt I Hex Af Ijt Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Sąlyga: labai geros būklės (naudotas), Calibrating and fine sanding machine with 1 sanding unit and 1 motor, top processing Working width: 1000 mm Sanding belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed speeds: 5.5 & 11 m/min 1st Unit: Combination unit, rubberized sanding roller, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx.) L x W x H = 1385 x 1980 x 1900 mm Weight: approx. 1800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Sanding belt emergency stop with disc brakes Table extension with 3 rollers on outfeed Emergency stop button Main switch Kedpfx Ajudxchjf Iowt CONVEYOR BELT LIKE NEW - replaced by us approx. 3 years ago MORE THAN 30 WIDE-BELT SANDING BELTS INCLUDED Notes on used machinery: • Subject to error in technical specifications and prior sale. • Prices quoted are ex-works and for self-collection – loading free of charge! • The machine has been cleaned and function-tested. • All machines are sold as viewed, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our premises. • Special arrangements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Gamybos metai: 2023, Sąlyga: naujas, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Application: Packaging, bundling, and protecting long or bulky products such as furniture, doors, wooden panels, etc. Operator Side: - Right side in the direction of product flow General Technical Data: - Main motor power: 1.5 kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear holders that press from above during cutting to secure the product - Photo sensor for automatic start of wrapping process - Touch-screen for adjusting machine parameters to product requirements - Operator safety systems Optional Equipment: - Various conveyor configurations - Infeed and outfeed roller conveyors - Air bubble film wrapping unit Technical Specifications: Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Kwedpfx Asfuwg Isf Iet Conveyor Belt Features: - Usable length: 1924 mm - Total length: 2000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m / sec - Load capacity: 100 kg/m Stretch Film Specifications: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Sąlyga: naujas, Table length 2200 mm Ksdjvn U D Iepfx Af Iowt Table width 1500 mm Lifting height 1900 mm Load capacity in kg: 3000 kg Total power requirement: 1.5 kW Lifting speed upwards (unloaded): 55 sec Lifting speed downwards (unloaded): 30 sec Connection voltage: 400 V Machine weight approx. 0.650 t Space requirement approx. 2.2 x 1.5 x 0.3 m The hydraulic lifting tables are electrically powered and operated. Equipped with a contact strip for safe lowering operation. Highly versatile for workshops, assembly departments, loading bays, etc.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, 2 machines of the same type with automation (interlinked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed: 12,000 rpm Tool magazine for 20 tools, BT 30 Kwsdov Iypcopfx Af Iot 4th axis HRT 210 with tailstock Chip conveyor Schusta automation system with YASKAWA robot

Gamybos metai: 2023, Sąlyga: naujas, Fully automatic orbital stretch wrapper Kwsdpfsfuwmusx Af Ijt SPINNER 1500s Application: Packaging, grouping, and protection of long or bulky items such as furniture, doors, wood panels, etc. Operator side: - right in the direction of product flow General technical data: - Main motor power: 2.2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,200 kg Standard equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with a mechanical brake system - Automatic stretch, clamping, and cutting system - Pneumatically operated top pressure units at front and rear, which press down on the product during the cutting process to hold it in place - Photoelectric sensor for automatic start of the wrapping cycle - Touchscreen panel for adjusting machine parameters to specific product requirements - Pre-programmed selection for recurrent product dimensions - Operator safety systems - Infeed and outfeed rollers Technical features: Wrapping dimensions according to diagram: - Max. length: unlimited - Min. dimensions (WxHxL): 100 x 18 x 550 mm Conveyor belt features: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Loading capacity: 150 kg/m Stretch film properties: - Max. film width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns

Sąlyga: labai geros būklės (naudotas), Planer 9 Köpfe Arbeitsbreite: 20 cm Arbeitshöhe: 22 cm 5 Ziehwalzen im Tisch Köpfe: 1 unten – 7,5 kW 2 rechts – 11 kW 3 oben – 11 kW Kodpfxetrdwtj Af Iswt 4 rechts – 11 kW 5 oben – 11 kW 6 unten – 11 kW 7 oben – 11 kW 8 unten – 11 kW 9 universal – 11 kW PERFEKTER ZUSTAND!

Sąlyga: geras (naudotas), Gamybos metai: 1956, Sunkioji tekinimo staklės, tekinimo staklės, tekinimo suolas, priekinės ir galinės ašies tekinimo staklės - Gamintojas: Meuser, priekinės ir galinės ašies tekinimo staklės tipas M3A - Tekinimo ilgis: 1400 mm Ksdjh Uuzyspfx Af Iswt - Tekinimo Ø virš lovos: 550 mm - Tekinimo Ø be lovos: 800 mm - Tekinimo Ø virš suporto: 300 mm - Špindelio skylė: Ø 58 mm - Špindelio apsisukimai: 15 - 810 aps./min - 3 žandikaulių griebtuvas: Röhm Ø 250 mm - Diskinė plokštuma: 500 mm - Priedai: įskaitant įrankių laikiklį/įrankius, žr. nuotraukas - Galinės atramos tvirtinimas: MK5 - Matmenys: 2770/1160/H1310 mm

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 280 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 470 mm, centro aukštis: 235 mm, tekėjimo ilgis: 1 000 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 150 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 800 kg, quillo laikiklis: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes: Kjdpfx Ajcirnief Iewt Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the cross and compound slides Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Control bar with 3 adjustable cams Machine lamp Fixed live centre Set of machine levelling plates

Sąlyga: geras (naudotas), Gamybos metai: 1972, LZ tekinimo staklės Gamintojas: HEIDENREICH & HERBECK, modelis: 21RO, pagamintos 1972 m. Su greito keitimo laikikliu Parat, 10 vnt., staklių dokumentacija, sriegių rodyklė, konuso centras, Forkardt 250 mm griebtuvas. Didžiausias tekinimo diametras virš lovio: 430 mm Didžiausias tekinimo diametras virš atramos: 255 mm Centro atstumas: 1000 mm Tekinimo ilgis: 750 mm Velieno apsisukimų skaičius: 19-2000 aps./min., 5,5 kW variklis Velieno anga: 56 mm Kwedpfx Afjt Ipi Ie Ijt Kiti duomenys žr. duomenų lape Užimamas plotas: ilgis 2900 mm, plotis 1100 mm, aukštis 1300 mm, svoris apie 1750 kg. Prieinami staklių dokumentai. Yra aušinimo įranga, drožlių atitvaras. Staklės geros būklės, galima parodyti su įjungta elektra.