Hidraulinis presas

HYDRAP HPSZb 160

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, mašinos/transporto priemonės numeris: 6538, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 20 242 h, spaudimo jėga: 163 t, eigos ilgis: 500 mm, atitraukimo jėga: 22 t, bendras svoris: 25 000 kg, pavaros tipas: hidraulinis, TECHNICAL DETAILS Ram Press force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing unit Drawing force: 400 kN Stroke: 100 mm Ejector in ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump unit ram + drawing cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump unit control circuit + ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-filter circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Back gauge spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil circulation lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Nsdpfoxgt Tzox Acpjla Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year 1999) Straightening machine (Year 1999) Feed unit (Year 2004) Tool breakage monitoring system Note: The seller strongly recommends inspecting the machine in advance, as the press cannot be removed from the hall in its current installed condition. If required, the seller may assist in contacting a specialized company for the relocation of the machine.

Būklė: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Nlodpfekvnumjx Acpoa Stroke cylinder: 350 mm Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Būklė: naudotas, Gamybos metai: 1993, Pressure: 160 t Throat depth: 360 mm Stroke: 300 mm Table size: 1500 x 700 mm Ram clamping surface: 1200 x 560 mm Return force: 40 t Stroke speed: 400 m/min Nlodpfx Aeh Ra R Iecpja Stroke speed - under load: 16 - 42 strokes/min Stroke speed - return: 350 mm/min Blank holder force: 630 kN Blank holder stroke: 100 mm Total power requirement: 42 kW Machine weight approx.: 19.5 t Ejector force: 50 kN Ejector stroke: 50 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 06 61 218, Ref. no.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine no.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Coil inner diameter: approx. 450 to 520 mm Coil outer diameter: max. 1,500 mm Nedpfx Acog U Utvepola Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Expansion of the carrying segments is manual using a hand crank via joints. Number of carrying segments: 3 Coil side guidance by robust clamping limit arms. Decoiler stand built in sturdy box-section as welded construction. Additional Equipment: Shutdown “Loop too small” via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guidance at the base housing of the loop control, with lateral guide rods. Pass-through width infinitely adjustable.

Būklė: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Nledpfx Aohlnzkocpoa Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Gamybos metai: 1971, būklė: geras (naudotas), Decoiler – Expanding Mandrel Decoiler with Coil Lifting Table Strip Width: 1,200 mm Strip Thickness: 0.3 – 5 mm Nsdpfxod Ha E So Acpela Coil Weight: 10 t Mandrel Ø: 508 mm

Būklė: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Njdpfxecxxx Rs Acpjla Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Gamybos metai: 1993, būklė: naudotas, TYPE: DEA 400/2000 Nledpfx Acjihf R Uopoa Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Overall Height (floor to top): 5,800 mm Distance Between Uprights (Front Opening): 3,400 mm Lateral Window Opening: 1,600 mm

Būklė: naudotas, Gamybos metai: 1987, Pressure / t Stroke / mm Table size / mm Machine weight approx. 65,000 kg Make: Schäfer Model: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Minimum pipe diameter with 600 mm roll: Ø 720 mm Minimum pipe diameter with 360 mm roll: Ø 460 mm Plate thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B plate thickness: 35 mm Nljdpsuddcaofx Acpja Cone bending: For cone bending, all rolls except the top roll can be tilted. The roll positions can be read on indicator instruments. For semi-automatic or fully automatic operation of the machine, the roll bearings are equipped with scale bars and cam followers for limit switch actuation. This allows the rolls to return to the same preset position repeatedly, ensuring a very high consistency of the bent sections.

Gamybos metai: 1980, būklė: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Njdpfx Acedlcy Hopsla Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.