Dvigubos kolonos tempimo presas - Hidraulinis

HYDRAP HPDZB 315 (UVV)

Gamybos metai: 1993, būklė: naudotas, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Gijdeihf R Uspfx Acaew Overall Height (floor to top): 5,800 mm Distance Between Uprights (Front Opening): 3,400 mm Lateral Window Opening: 1,600 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, galia: 37 kW (50,31 AG), spaudimo jėga: 250 t, eigos ilgis: 150 mm, stalo plotis: 900 mm, stalo ilgis: 1 000 mm, bendras svoris: 16 000 kg, Very nice and well-maintained hydraulic press. 250 tons pressing force. Approximate dimensions: Height: 380 cm Width: 200 cm Length: 200 cm Weight: 16,000 kg Can be loaded by crane upon collection against payment. Transport can be arranged. Sold on behalf of customer. Location: DK-7600 Struer. Schedule an appointment for viewing. Gjdpfx Aery Trpecaeiw

Būklė: geras (naudotas), Description: The machine is in good technical condition, test run possible by prior arrangement. Max turning diameter: 660 mm Max machined diameter: 660 mm Main spindle: Speed range: 35-5000 rpm Main drive power: 22/15 kW Max. torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub spindle: Speed range: 35–5000 rpm Power (10 min/continuous): 18.5/15 kW Max. torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Coolant tank capacity: 300 l Connected load: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: Giodpoy Amqzjfx Acajw Pump capacity: 20 l/min Pump pressure: 5 bar Accessories: Technical documentation, chip conveyor with cooling, tool magazine for 20 tools B-axis (positioned in 0.001° increments), C-axis, Y-axis Position indexing of sub spindle rotation Synchronization of main and sub spindle Tool presetter (Tool Eye) Front door interlock Tool magazine for 20 tools Complete cooling system IC memory card interface

Būklė: geras (naudotas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Giedpfx Acskvmi Ssaow Control: Siemens SIMATIC Panel Year of Manufacture: 1970 Hydraulic press suitable for the fabrication of large components such as dished heads, tanks, boilers, shipbuilding, and steel construction applications. Refurbished in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet. Installed height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Comprehensive die package with radii: 10/20/30/50/60/80/100 Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine pit depth: 2,350 mm Specifications Metric / US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (Estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please Note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The details are provided in good faith, however, accuracy cannot be guaranteed. Accordingly, no assertions or contractual terms are implied. We recommend verifying all critical details independently.

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Godpfx Acjg Ezarsaeiw Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, YEAR: 2008 MAXIMUM RAM FORCE: 2,000 tons SLIDE STROKE: 1,500 mm TABLE DIMENSIONS: 5,000 x 2,380 mm BLANKHOLDER FORCE (UPPER): 300 tons CUSHION STROKE (RAM): 200 mm FAST STROKE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE (SLIDE): 400 mm Giedpfx Acevm Eixeaew OVERALL HEIGHT: 9,145 mm DISTANCE BETWEEN UPRIGHTS (FRONT OPENING): 5,000 mm TOTAL WEIGHT: N/A

Gamybos metai: 2026, būklė: naujas, ‼️SPECIAL OFFER‼️AVAILABLE FROM STOCK IN HEILBRONN! Only while supplies last! ‼️IMMEDIATE DELIVERY‼️IN STOCK‼️ Powerful and robust machine at an affordable price from Josan & Söhne Small Alligator Shear: ➡️3 kW motor ➡️7 to 8 cuts per minute ➡️Dimensions: 1100 x 980 x 800 mm ➡️Weight: approx. 275 kg ➡️Jaw opening: 15 cm ➡️Blades can be reversed once dull for extended service life ➡️UVV (German accident prevention regulations) executed by a German company Net price: €3,999.00 +19% VAT: €759.81 Gross price: €4,758.81 Large Alligator Shear: Gjdpjp E Ehqofx Acajiw ➡️7.5 kW motor ➡️Jaw opening: 30 cm ➡️7 to 8 cuts per minute ➡️Dimensions: 249 x 109 x 174 cm ➡️Weight: approx. 1,500 kg ➡️Blades can be reversed once dull for extended service life ➡️630 kN cutting force ➡️Hydraulic pressure: 21 MPa ➡️UVV (German accident prevention regulations) executed by a German company PRICE ON REQUEST Photos/specifications may vary. Subject to errors and changes.

Gamybos metai: 1980, būklė: geras (naudotas), A used, very well-preserved cycle-controlled lathe from Weisser Heilbronn with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Cross travel X-axis: 350 mm Longitudinal travel Z-axis: 1850 mm Spindle nose DIN 55022 Size 8 Number of spindle speeds: 18 (14 – 1400 rpm) Spindle bore: 71.5 mm Diameter of front bearing: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW 400V 50Hz Max. permissible spindle torque: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MT 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the centre, size "C" Gedpfjgyy I Aox Acasiw 4-position turret behind the centre Tool holders Coolant system Follow rest, pneumatically operated Technical data and specifications are subject to change without notice. Video conference via WhatsApp available by appointment.

Būklė: naudotas, Gamybos metai: 2000, Year of manufacture: 2000 Control: Mazatrol 640 Including documentation Giodpfx Aceyh E Irjaow Chip conveyor TECHNICAL DATA – MAZAK INTEGREX 200SY Performance / Capacity Maximum swing: Ø 540 mm Chuck size: 8" Max. machining diameter: Ø 540 mm Max. machining length: 1018 mm Max. external diameter for bar stock: Ø 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: Ø 61 mm Spindle speed: 35 – 5000 rpm (standard) / 35 – 4500 rpm (option: 5000)* Motor power (30 min rating): 22 kW (18.5 kW*) Max. torque: 350 Nm (35.7 kgf·m) Sub spindle (counter spindle) Spindle nose: JIS A2-6" Spindle bore diameter: Ø 44 mm Spindle speed: 35 – 5000 rpm Motor power (10 min rating): 7.5 kW Max. torque: 57 Nm (5.8 kgf·m) Turret / Tooling data Turret type: With ATC, spindle turret Tool size external turning tool: □ 25 mm Tool size internal turning tool: Ø 40 mm Milling tool: Max. Ø120 × 250 mm length Indexing time (90 degrees): 0.5 s Milling spindle speed: 15 – 6000 rpm (option: 10000) Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm (6.35 kgf·m) Feed axes X-axis: Travel 530 mm / rapid traverse 30,000 mm/min Z-axis: Travel 1065 mm / rapid traverse 33,000 mm/min Y-axis: Travel 140 mm / rapid traverse 15,000 mm/min Z2-axis: Travel 1005 mm / rapid traverse 20,000 mm/min Media / Control Coolant tank capacity: 250 L Power consumption (continuous operation): 32.7 kVA Machine dimensions / Weight Overall length: 3485 mm Overall width: 2105 mm Overall height: 2416 mm Weight: 73,575 N (7,500 kgf)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1114.3705-24, Used CNC lathe Manufacturer: Boehringer Model: VDF 250Cm Year of manufacture: 1997 VDF Boehringer 250C This machine includes the following features: - 1000 mm turning length - No tailstock - Driven tools - Special swivelling chuck - Siemens 840C control system The Boehringer VDF 250 Cm is a CNC lathe designed for the machining of chuck components. It stands out for its robust construction and precise machining capabilities. Gisdpfx Aewlap Aecaew Technical data (Model year 1997) Working area: - Swing diameter over bed: 550 mm - Swing diameter over cross slide: 480 mm - X-axis travel: 405 mm - Z-axis travel: 1,099 mm - Max. turning length: 1,000 mm (Tailstock: None) Turret: - Number of stations: 12 - Tool holder: VDI 50 DIN 69880 - Driven tools: YES Spindle: - Spindle nose: Size 8 DIN 55026 - Spindle bore: 103 mm - Max. chuck diameter: 315 mm - Max. drive power (50% duty cycle): 53 kW - Max. torque: 780 Nm - Speed range: 30–3,000 rpm Feed rates: - Automatic feeds: 1–10,000 mm/min - Rapid traverse speed: 10 m/min (X and Z axes) - Max. feed force: 15 kN Dimensions and weight: - Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm - Machine weight: approx. 11,000 kg Equipment: - Swivelling control panel - HYDROKRAFT hydraulic system - Coolant system with 600 l tank, pump pressure max. 5.5 bar, flow rate 60 l/min, pump power 1.1 kW - Chip conveyor with 325 l tank capacity, discharge to the right - 3-jaw power chuck - Oil mist extraction - Electrical cabinet with cooling unit and temperature controller by RITTAL Control system: - SIEMENS SINUMERIK 840 C Variants and Differences There are various models in the VDF 250 series, such as the VDF 250 CU, equipped with different control systems (e.g. PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are pure chuck machines designed without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe, noted for its stability and precision. Its durable construction and comprehensive range of features make it ideally suited for machining chuck components in diverse production environments.