Crosshead piston compressor oil-free for H2/Ar

HYCOMP 2WN137F1

Būklė: paruoštas naudoti (naudotas), KOMPLETTE KRONES PET-FLASCHEN ASEPTISCHE ABFÜLLLINIE FÜR FRUCHTSÄFTE/GETRÄNKE UND SPRITZER. GEEIGNET FÜR STILLE UND KOHLENSÄUREHALTIGE PRODUKTE. BAUJAHR 2002–2007 LEISTUNG: 0,5 l x 36.000 Flaschen/h 1,0 l x 30.240 Flaschen/h 1,5 l x 25.200 Flaschen/h Verschlüsse: 28 mm DIE LINIE UMFASST FLASCHENHERSTELLUNG, ABFÜLLUNG, ETIKETTIERUNG, VERPACKUNG UND PALETTIERUNG: 1. Steuerung: Ruland 2002, Touchscreen, Flash-Heating & CIP/SIP 2. Pasteur: Ruland 2002, Rohrbündelwärmetauscher, 1.315 l Vorlagebehälter, max. 21.800 l/h 3. Steriltank: Roth 2002, 11.000 l Fpodjxm Rwqjpfx Ahwjd 4. Karbonisierung: Roth/Ruland 2002, 2.575 l, demontiert 5. Stickstoffanlage: Terboven/ISTE 2002 6. Hygienecenter: Ecolab/Lang 2002, CAF, ohne SPS 7. Sterilwassersystem: Roth/Ruland 2002, 9.000 l/h, Puffer 2.575 l 8. Sterilwassersystem: Roth/Ruland 2002, 9.000 l/h, Puffer 2.575 l 9. CIP/SIP-Anlage: Ruland 2002, 20.000 l/h, 1.315 l Vorlagebehälter 10. Reinraum: Weiss 2002, Belüftung/Überdruck 11. Preform-Bunker: Dieterle 2002, MD3 12. Preform-Zuführung: Tanner 2002, HFT 4730 / RGT 1624 13. Streckblasmaschine: Krones Contiform S16 2002, 16 Stationen, 1,0–20.000 Fl./h 14. Luftförderer: Krones 2002, automatische Schienenverstellung 15. Verschlussförderer: Gassner 2002, 2 Behälterplätze, Verschlusshaspel 16–18. Füller: Krones CAF VODM 100 2002, Injektor (60), Spülmaschine (80), Füller (100), Verschließer (20), 1,0–20.000 Fl./h, 28 mm Verschlüsse, still/karbonisiert 19. Etikettenkontrolle: Krones 2002, in Prontomodul integriert 20. Flaschenkamera: Krones 2002 21. Transportband: Krones 2002, Gebläse vor Etikettierung 22. Etikettiermaschine: Krones Prontomodul 2007, max. 35.600 Fl./h 23. Canmatic-Modul: Krones 2007, Papieretiketten 24. Contiroll-Modul: Krones 2007, Folienetiketten von der Rolle 25. MHD-Codierung: Videojet Excel/170i 26. Schrumpfpacker: Krones Variopak 2002, 0,5–36.000 Fl./h, Kartonaufrichter & Folienführung 27. Verpackungsförderer: Krones 2002 28. Griffanleger: Twinpack MHTE 2002 29. Leerpalettenmagazin: Krones LPM 2002 30. Palettierer: Krones Roboter 3A Picker 2002, 4.000 Gebinde/h 31. Palettenfördertechnik: Krones 2002, Querverschiebewagen & Dreher 32. Leerpalettenmagazin: Krones LPM 2002 33/34. Palettenwickler: Franpak 2002, Haubenapplikator 35. Umreifungsmaschine: Bornbinder HB 2002 36. Palettenetikettierung: Logopak EAN 128 2003 DIE ANLAGE IST NOCH IN BETRIEB, AUSGEZEICHNETER ZUSTAND. STANDORT: DEUTSCHLAND.

Būklė: naudotas, Zu verkaufen: Salmatec Maxima 700 Pelletpresse in einwandfreiem Zustand, installiert in einem Rematec-Container mit Schaltschrank und Zelthalle. Kapazität – bis zu 3 t/h. Die Linie umfasst: - Presse und Hammermühle: Salmatec – bewährte deutsche Qualität mit hoher Effizienz und Langlebigkeit. - Förder- und Dosiertechnik: Rematec – robuste und präzise Materialförderung in allen Prozessschritten. - Zusatzausrüstung: Zyklone, Siebe, Kühler, Schaltschrank usw. - Zelthalle. Wichtige Vorteile: - Hohe Produktionsleistung – bis zu 3 t/h. - Hochwertige Komponenten europäischer Hersteller. - Geeignet für die professionelle Pelletproduktion aus Holzbiomasse, Agro-Biomasse oder anderen Rohmaterialien. - Voll funktionsfähige Linie – Vorführung möglich. - Sofort verfügbar. Fpedpfx Ahjit I Rtjwod Demontage und Transport sind vom Käufer zu organisieren. Wir können eine geeignete Fachfirma für diesen Prozess empfehlen. Die Anlage kann im voll funktionsfähigen Zustand in Schweden besichtigt werden. Alle Fundamentpläne und DWG-Dateien sind vorhanden. Preis: EUR 650.000

Būklė: naujas, Gamybos metai: 2024, The Durma tube laser HD-TC 60220 stands for utmost precision and efficiency in the processing of tubular materials. With its impressive maximum tube diameter of Ø220 mm and the capability to cut both square profiles of up to 160 x 160 mm and rectangular profiles of up to 200 x 100 mm, this tube laser offers exceptional flexibility for a wide range of applications. Thanks to its advanced automatic loading system, which can handle tubes up to a diameter of Ø170 mm, and the ability to process materials up to a length of 6500 mm, the HD-TC 60220 is ideal for projects requiring fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, further enhancing the machine's efficiency and reducing processing times. Fedpfsq Tpkyex Ahwopd Max. tube diameter: Ø220 mm Laser power: 3 kW Max. square profile dimensions: 160 x 160 mm Max. rectangular profile dimensions: 200 x 100 mm Min. tube diameter: 20 mm (12 mm with manual loading) Max. tube diameter for automatic loading: Ø170 mm Max. profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. material length: 6500 mm Min. material length for automatic loading: 3000 mm Last piece length: 4000 / 6000 mm Discharge length: 150 mm Max. material weight per meter: 52 kg/m Max. material weight (total length): 340 kg Max. loading weight: 3000 kg Profile types: round, square, rectangular, elliptical Types of open profiles: L, U

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GN156, tuščias svoris: 356 kg, didžiausias leistinas svoris: 944 kg, bendras svoris: 1 300 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 2 630 mm, krovinių skyriaus plotis: 1 450 mm, krovos erdvės aukštis: 400 mm, Įranga: įkėlėjas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1,620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Fpodpeva H Amsfx Ahwjd Shot volume: 1,779 cm³ Injection pressure: 1,855 bar Platen dimensions: 1,300 x 1,200 mm Type: Horizontal Drive: Hydraulic

Gamybos metai: 2024, būklė: naujas, For sale: Drying System - 1T 184 TPR Model (Mobile Belt Conveyor) We offer a high-quality drying system, ideal for drying wood sawdust, crops, recyclable waste, and food industry raw materials. Below are the design data and features of the drying system: Design Data: • Processed product: Sawdust • Physical form: Loose – > 1 mm • Initial moisture content: 55%, 50%, 40% • Final moisture content: 12% • Wet capacity: 4.00 t/h, 4.50 t/h, 5.65 t/h • Dry capacity: 2.05 t/h, 2.55 t/h, 3.85 t/h • Drying air temperature: 80 °C • Thermal power consumption: 1,800 - 2,350 kWh • Max. evaporated water per hour: 1,800 - 1,955 Kg/h Installed Electrical Power: • Feed hopper: 5.5 kW (x2) • Drying belt: 2.2 kW • Discharge device: 5.5 kW • Exhaust fans: 22.00 kW (x3) • Cleaning fans: 4 kW (x2) • Total installed power: Approx. 92.70 kW Water-Air Heat Exchanger: • Recommended thermal capacity: 2,600 kW • Water temperature: 90 °C in – 70 °C out Dimensions: • Dryer frame external dimensions: Approx. 22 m long, 6 m wide • Drying belt surface: 72 m² • Discharge device: 5,500 mm x Ø 300 mm • Feed hopper: Approx. 1.00 m³ • Number of exhaust fans: 3 • Number of water-air heat exchangers: 4 Technical Description: • Feeding system: Adjustable screw conveyor with level sensor. • Drying table: Modular design with inspection windows. • Drying belt: Polyester fabric conveyor with steel rollers. • Thermal insulation: 50 mm thick rock wool with Magnelis® cladding. • Mixing brush: Painted steel mixing brush. • Base frame: Folded steel sheets with reinforcing profiles. • Drying belt cleaning system: High-pressure air and water spray system. • Water spraying system: Closed-loop water spraying system. • Stairs and access: Safe access stairways and walkways. • Discharge device: Steel screw discharge with motor. • Heat exchangers: High-efficiency steel finned heat exchangers. • Air extractor fans: Centrifugal fans with vibration dampers. • Heat recovery: Warm air recirculation duct. • Machine enclosure: Prefabricated insulated sandwich panels. • Dust filters: Dust filters on air intake grille. • Painting process: Phosphating, passivation, polyester powder coating. • Electric control panel with PLC: SCHNEIDER electric and PLC components, HMI operator panel. • Moisture control system: PT 100 temperature sensors. • Remote service: Direct internet connection. • Inlet and outlet moisture sensors: 4-20 mA setting. Fpodpoua D U Ijfx Ahwod For more information and a quotation, please contact us! We look forward to your inquiry! Price: €530,000

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM throughfeed drilling machine 3. MORBIDELLI - ZENITH F2 CDM throughfeed drilling machine 4. MAHROS - BRUSH SF unloading system Machine connected - operates daily in a single shift. Fodpogb D Afsfx Ahwepd The first drilling unit features: Upper vertical heads - 3 units Lower vertical heads - 6 units Horizontal heads, left + right - 2 units The second drilling unit features: Upper vertical heads - 3 units Lower vertical heads - 6 units Horizontal heads, left + right - 2 units Rear horizontal heads - 6 units Below you will find detailed machine specifications and a video. It is possible to inspect the machine daily. The machine will be available in August 2021.

Gamybos metai: 2017, būklė: beveik kaip naujas (naudotas), 2-Station Spray Cleaning Machine: - Lightly used - Sale due to production restructuring - Stations 1 and 2: spray cleaning - Automatic transport system - Two independent tanks - Tank 1 equipped with oil separator - Temperature up to 80°C - Fully automated operation with 4 programmable cycles - Automatic water management system Transport trolley: 1,600 x 850 x 395 mm (L x W x H) Usable dimensions: 1,530 x 830 x 800 mm (L x W x H) Dimensions: Complete washing system (machine with loading and unloading): 13,800 x 2,000 x 2,420 mm (3,525 mm) (L x W x H [H incl. superstructure]) Infeed module: Fedskqxtzjpfx Ahwjpd 5,000 x 850 (1,140) x 700 mm (L x W x H [W with sensor]) Discharge module: 5,000 x 850 x 700 mm (L x W x H) Tank frame: 2,200 x 1,300 x 1,300 mm (L x W x H) Electrical connection: 3 x 400 V , N, PE – 50 Hz – 100 A – 65 kVA

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Fpsdpfefz I D Dsx Ahwod Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, galia: 397 kW (539,77 AG), kuro tipas: dyzelinas, bendras svoris: 32 000 kg, ašių konfigūracija: 3 ašys, stabdžiai: retarderis, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, krovimo vietos ilgis: 4 000 mm, krovinių skyriaus plotis: 2 480 mm, Gamybos metai: 2025, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), kranas, navigacijos sistema, oro kondicionavimas, suodžių filtras,