Plokštės grąžinimas

HOMAG TFU 140/R/20/08/065

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008364, Didžiausias plokštės plotis: 1000 mm Didžiausias plokštės ilgis: 2500 mm Podpfx Ahjx Swc To Hspl Transporterio ilgis: 6550 mm Ruožų grąžinimas briaunų klijavimo staklėms: dešinėje

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm Ppedpfx Ajxnldbjh Hsl GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: naudotas, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residues from wood, paper, plastics, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compaction, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Capacity: 50 kg/h (material-dependent) Throughput: 0.45 m³/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Ppedpfx Ahowqhwlo Hol Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid potential misunderstandings, on-site inspections are possible and recommended by prior appointment Sale as is Technical specifications, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is provided on used machines; the goods are sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Sąlyga: geras (naudotas), Gamybos metai: 2002, Edge banding machine with jointing cutters, otherwise fully equipped. PU adhesive can be used. Pedpfx Aogmn H Ash Hopl

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 5 550 mm, pjūklo juostos plotis: 80 mm, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 400 mm, stalo plotis: 1 060 mm, stalo ilgis: 800 mm, darbinio aukščio: 400 mm, įėjimo įtampa: 400 V, - itališkos gamybos - lamelių pjovimo juostinis staklės - nedažytas - labai gera būklė - naudotas pjūklas Pjūklas: - ratų skersmuo: 800 mm - didžiausias pjūklo plotis: 80 mm - didžiausias pjovimo aukštis: 400 mm - pagrindinis variklis: 11 kW - pastūmos greičio diapazonas: 2–40 m/min - pastūma su pneumatiniu spaudimu prie kreiptuvo - įvado metalinis slystantis volelis - pjūklo ilgis: 5550 mm - juostos atstumas nuo korpuso: 780 mm - sraigtinis juostos įtempimas - stalo matmenys: 1060x800 mm Pjdpfsw H Rq Hsx Ah Hopl - darbinis stalas pasviręs 15° kampu - ištraukimo angos skersmuo: 120 mm - pjūklo drėkinimo sistema - kojinis stabdis - lieti ratlankiai - žvaigždės / trikampio paleidimas - maitinimas: 380V - matmenys ilgis/plotis/aukštis: 1600x1100x2400 mm - svoris: 860 kg Pastūma: - metalinis dantytas traukimo volelis - penki pastūmos greičiai su keitimu diržu - volelio aukštis: 30 mm - pastūmos variklis: 0,75 kW - spaudimas

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AL1/003895, X ašies eiga: 2 949 mm, Y ašies eiga: 1 353 mm, įėjimo įtampa: 400 V, Working area: 2500 x 1240 mm Z-axis travel length: 200 mm Passage height: 180 mm Drilling unit: Drilling head with 10 + 4 spindles 6 individually selectable vertical spindles in X direction 4 individually selectable vertical spindles in Y direction 2 horizontal spindles in X direction (1+1) 2 horizontal spindles in Y direction (1+1) Speed: 4000 rpm Power: 2.2 kW Pitch: 32 mm Drill chuck: M10 with 11 mm fitting Extraction nozzle: D=160 mm Milling spindle: Tool holder: HSK 63F Speed: 1,500 – 24,000 rpm, stepless via inverter Motor power: 6.6 kW (9 HP from 12,000 rpm, S1) Clockwise / counterclockwise rotation Ceramic bearings Pre-fitted for automatic angle head changer Grooving saw unit: Fixed in X direction (longitudinal) Power: 2.2 kW (3 HP) Speed: 6,000 rpm Max. saw blade diameter: 160 mm Saw blade thickness: approx. 3.2–6 mm Saw blade bore: 30 mm Extraction nozzle: D=200 mm Work table: 4 supports 900 mm, infinitely manually adjustable in X 12 vacuum cups, round D=110 mm, steplessly adjustable in Y (2 per support) 2 stops in X (1x left / 1x right) 1 stop in Y per support (6 total) Auxiliary stop on the right with roller conveyor to extend the X-axis to 3,230 mm (2 clampings) Retractable reference stops CNC controlled Pendulum processing (2 working zones) Further technical data: Total connected load (max.): 16 kW Recommended circuit protection: 64 A Supply: 400 V (50Hz) Compressed air: 7 bar System pressure: 10 bar Compressed air consumption: 150 nl/min Central extraction duct with flap control: D=250 or D=300 mm Extraction velocity: 30 m/sec Air consumption: 3,400 m³/h Vacuum: 3,000 Pascal Machine weight: approx. 2,700 kg Ppodpfx Ahexxik Hs Hsl Space requirement: approx. 6,400 x 2,970 mm Transport dimensions: 4,400 x 2,200 x 2,500 mm

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007877, Maks. plokštės plotis: 1100 mm Maks. plokštės ilgis: 2500 mm Ppjdpfx Aewkf Hqoh Hol Detalės grąžinimas briaunų klijavimo staklėms: kairėje

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Pedpfx Ajwd Itmjh Hspl Jointing unit: yes Multifunction unit: yes Maximum feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Kantavimo staklės Holz-her Lumina 1380 su grąžinimo mechanizmu Maks. priklijuojamos briaunos storis: 8 mm Maks. darbinio stalo storis: 60 mm Maks. ritininės medžiagos storis: 3 mm Min. ruošinio ilgis: 160 mm Min. ruošinio plotis: 60 mm HOLZ-HER GLU JET klijų sistema Purškimo įrenginys Šlifavimo įrenginiai Išankstinis pašildymas Galinio pjovimo pjūklas Ppedpfxox Nnbbo Ah Hjl Kantavimo/užapvalinimo/nukirtimo stotys Kampų užapvalinimo įrenginiai Briaunos grandiklis Šepetys Holz-her Edgecontrol valdymas

Sąlyga: geras (naudotas), Gamybos metai: 2011, Kompaktinis dulkių surinkėjas, dulkių surinkėjas, dulkių šalinimo ventiliatorius, ištraukimo sistema, dulkių ventiliatorius, ištraukimo įrenginys, dulkių ištraukimo įrenginys, atskirtuvas, filtrų sistema, kasetinis dulkių surinkimo įrenginys, švaraus oro sistema, švaraus oro dulkių surinkėjas - Filtravimo sistema: kompaktiškas dulkių surinkėjas Höcker Polytechnik Vacomat 200 XPE mobilus dulkių surinkėjas - Nominalus oro tūrio srautas: 2260 m³/h - Ištraukimo ventiliatorius: 3,7 kW - Įsiurbimo jungtis: Ø 200 mm Ppjdpfx Ahexu Dybs Hol - Atskiros dalys: elektrinis filtro valymas, 3 vnt. drožlių konteineriai, žiūrėkite nuotraukas - Matmenys: 890/2620/H2120 mm - Svoris: 440 kg