Briaunų apklijavimo mašina

HOMAG Power Edge

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Prsdpfed Nuu Hjx Afwsd Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: naudotas, Gamybos metai: 2013, Technical Data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical Features and Equipment General Functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double top pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spray unit at infeed and outfeed Edge preheating Pre-milling Unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing Unit Adhesive and hot air application Heated application roller Quick-change complete unit Predov Szt Djpfx Afwsd Automatic motorized position adjustment 3 pressure rollers Edgebanding speed: 14 m/min End Trimming Unit Twin-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius Milling Unit 2 tools Automatic adjustment in two axes Automatic overlap setting Copying Unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Sąlyga: naudotas, Gamybos metai: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software. Panel height: 8 - 60 mm. PVC/ABS thickness: up to 3 mm. Feed speed up to 25 m/min (20 m/min with contour trimming). Electronically adjustable working height via CNC. Motorized, rubberized pressure belt with superior hold. Panel support guide for easier handling and introduction of small panels. Controlled entry guide. Anti-adhesive unit. Pre-milling unit with two motors (each 3 kW, 9000 rpm). Roller-bearing glue application unit for PUR adhesive, including premelter and glue tank. Edge pressing unit for straight profiles with CNC-actuated pressure rollers. Trimming unit with two motors (automatic tilt adjustment). Overlapping end trim unit with two motors. Rounding unit with two multifunction motors (flush trimming and rounding) with CNC control. Scraper unit for edges. Glue scraper unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS NEED TO BE VERIFIED. Predpsvqbh Eefx Afwed

Gamybos metai: 2012, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Abmessungen Breite: 1900 mm Abmessungen Tiefe: 6175 mm Abmessungen Höhe: 300 mm Hauptantrieb Drehzahlbereich der Spindel: 24.000 U/min Spindelmotorleistung: 15 kW Anzahl Achsen: 3 Verfahrwege X-Achse: 6175 mm Prsdpfx Afsv Rhqmewed Y-Achse: 1900 mm Z-Achse: 300 mm Werkzeugausstattung Anzahl der Werkzeugplätze: 30 Werkzeugaufnahme: HSK F63 Medien Späneförderer: Ja Zusätzliche Ausstattung Sicherheitsvorrichtungen: Laser, Puffer Drehmomentstütze: Ja Nutschneidsäge: 90° schwenkbar Vertikalbohrspindeln: 17 Horizontale Bohrspindeln X-Richtung: 2 Horizontale Bohrspindeln Y-Richtung: 2 Flüssigkeitsgekühlte Frässpindel: Ja Geschlossene Energiekette: Ja Handbediengerät: Ja HOMAG SaveScan: Ja Diese 3-Achs CNC-Bearbeitungszentrum HOMAG WEEKE Profi BMG 611/60/15/F/AP wurde 2012 gebaut. Das Bearbeitungszentrum ist für Präzision und Effizienz bei der Holzbearbeitung konzipiert. Nutzen Sie die Gelegenheit, dieses HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC-Holzbearbeitungszentrum zu erwerben. Kontaktieren Sie uns gerne für weitere Informationen zu dieser Maschine. Einsatzgebiete CNC-Holzbearbeitung

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006835, Type of attached edge: thin edge, thick edge Post-processing unit: yes Max. panel height: 55 mm Predpfxjrl Utbe Afwed

Sąlyga: naudotas, Gamybos metai: 2008, Naudota mašina Pagaminimo metai: 2008 Prodpfewx Aaqjx Afwsd Būklė: mašina naudota Vokietijoje, reguliariai prižiūrima (paskutinis aptarnavimas Homag atliktas 2024/11) Įranga ir techniniai duomenys: Rušinės storis min.: 12 mm Rušinės storis maks.: 60 mm Mažiausi rušiniai (Ilgis × Plotis): 240 × 55 mm (kai storis 22 mm) / 100 mm (kai storis 60 mm) Briaunų storis min.: 0,3 mm (ritininė medžiaga) / 0,4 mm (juostinė medžiaga) Briaunų storis maks.: 3 mm (ritininė medžiaga) / 20 mm (juostinė medžiaga) Padavimo greitis: bepakopis reguliavimas 18–25 m/min (dažnio keitimu) Klijų tipas: EVA termoplastiniai klijai Klijų padavimas (vonia / kasetė / purkštukas): lydymo įrenginys su granulių talpa Klijų talpa / kasetės dydis: granulių talpa, lydymo galia 18–35 kg/h, automatinis lygio reguliavimas Įkaitimo laikas: apie 8–10 min. Krašto podavimo žurnalas (pozicijų sk.): 2 ritiniai (automatinis ritinių keitimas) Automatinis krašto keitimas: taip (automatiškai PC22 valdymu, galima perjungti rankiniu būdu) Priešfreza: 2 × 1,5 kW, 200 Hz, 12 000 aps/min, pneumatinis reguliavimas Prispaudimo zona: 1 priešprispaudimo volelis Ø 150 mm + 6 paskesnių prispaudimo volelių Ø 70 mm, automatinis reguliavimas Galų pjovimas: HL84 agregatas, 2 × 0,8 kW, pneumatinis reguliavimas (kampu / tiesiai) Lyginantis frezavimas: per priešfrezavimo agregatą, pneumatinis reguliavimas Radialinis frezavimas: FK13 profilinis frezavimo agregatas, automatinis 8 įrankių keitiklis (R = 2 mm) Kampinis/profilinis frezavimas: taip, su FK13 pneumatinis reguliavimas Grandiklis: integruotas į daugiafunkcę valymo įrenginį MN21 Poliravimas: poliravimo agregatas FA11 Prispaudimo blokas: KAL310/A20/S2 prispaudimo frezavimo agregatas, 2 × 3 kW Rušinės pašildymas: yra Atskyrimo skysčio purškimo įtaisas: viršuje / apačioje, modelis 2929 (F.01) Ištraukimo antgaliai: keli Ø 100 mm (kiekvienam agregatui atskiras ištraukimas) Valdymas: power control PC22 (pramoninis PC, woodCommander Windows XP embedded) Darbinė įtampa: 400 V, 50 / 60 Hz Atitiktis: CE atitinka ES direktyvą 98/37/EB Matmenys / vietos poreikis: apie 8 000 × 1 400 × 1 600 mm Svoris: apie 3 000 kg Nuotraukose matoma grąžinimo įranga nepriklauso komplektacijai! Prieinamumas: greitai Sandėlio vieta: Lietuva

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood thickness: 22 mm PVC/ABS thickness: 3 mm Feed speed up to 25 m/min Electrically adjustable working height via CNC Motorized panel support guide, electronically adjustable via CNC Predpfowlbxljx Afwjd Anti-adhesive unit Prefeeder unit with 2 motors, adjustable electronically via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors and dynamic extraction system following the blades at every movement Offset trimming/chamfering unit with 2 motors, electronically adjustable via CNC Non-stick unit Multifunction corner rounding unit with 2 motors (chamfering + corner rounding) Electronic edge scraper unit, adjustable via CNC Glue scraper unit Brush group “SP-501” Automatic return system with overhead discharge Winner 4A

Sąlyga: visiškai atnaujintas (naudotas), Single-Sided Edgebanding and Edge Processing Machine (Left) Edgeband Material (Roll) Thickness (min/max) mm: 0.3 - 3 Edgeband Thickness for Strips/Slats (min/max) mm: 1 ALU Panel Thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed Speed (adjustable) m/min: 6 - 30 FORMATTING PROCESSING: Jointing Cutter Unit with CNC Control 08.376 (2 x 4.5 kW) Sprayer Unit (for liquid release agent) EDGEBANDING SECTION: Lamps for edge heating of workpieces Gluing Unit (PUR glue + pre-melter) 04.1569 Edge Pressure Zone mm: 1000 + edgeband magazine for rolls (compartment No. 6) End Trimming Unit 08.42 (2 x 0.66 kW) Working Speed 25 m/min (0–25°) Pre-Milling Unit 08.0555 (2 x 1 kW) Milling Unit 08.055 (2 x 1 kW) 0°–30° + Sprayer Unit (for sliding fluid) Contour Milling Unit (for fine trimming) CNC Controlled 08.348 (2 x 0.66 kW) Multi-Profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.517 (Pneumatic) + Sprayer Unit (for polishing fluid) Buffing Unit 08.614 (2 x 0.25 kW) Universal Milling Unit for Grooving, Rebating and Profiling 08.183 (1 x 3 kW) Predpfocr T N Dox Afwjd Smoothing Unit 08.53 Radius Sanding Unit for Straight Edges WI (4 x 0.75 kW)

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 18,39 kW (25,00 AG), kuro tipas: dyzelinas, spalva: raudona, bendras svoris: 2 540 kg, kėlimo aukštis: 2 784 mm, padangos dydis: 31 x 15,5 x 15, padang padangų: 100 procentas, pavaros būklė: 100 procentas, sėdimų vietų skaičius: 1, emisijos klasė: Euro 5, kasimo kibiro plotis: 1 600 mm, Gamybos metai: 2025, Įranga: hidraulika, kabina, padėklų šakės, papildomi žibintai, priekabos jungtis, visų varančiųjų ratų pavara, Compact Yard Loader H&R 2710 – Quality at an Affordable Price. The new 4-cylinder engine is powerful and efficient, meeting the Euro 5 standard without the need for a particulate filter or AdBlue. Thanks to its small turning radius, it is also suitable for use in confined spaces. With an all-wheel torque converter transmission and standard wide tires, it offers precise and safe handling even in challenging ground conditions. The hydraulic quick coupler allows for rapid attachment changes. Third and fourth hydraulic circuits with float position are available, enabling the operation of various front-mounted implements. The wheel loader is delivered with a standard bucket and pallet forks. H&R loaders are technically and visually optimized and thoroughly inspected in-house. Each machine also receives comprehensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. For our machines, a TÜV Süd certificate is available for obtaining an individual operating permit according to §21 StVZO (road approval/operating permit as a self-propelled work machine). Key Features H&R 2710: • Fully equipped • Extensively optimized in Germany • Includes pallet fork • Includes standard bucket (160 cm wide) • Hydraulic quick coupler • Auxiliary hydraulics for front implements (3rd & 4th circuit) • Additional cooler for hydraulic oil • Joystick control with electronic gear shifting and float position • Spacious cab with excellent all-round visibility • Heating and ventilation • 220V electric pre-heating for engine • Rotating beacon • LED auxiliary lighting • Radio with MP3 and USB • Adjustable comfort seat with armrest • Adjustable steering column • Hour meter and fuel gauge • Towing hitch with ball head and drawbar eye • Rear-view camera with display • 1-year spare parts warranty • CE-compliant according to EU Machinery Directive Price Net: €16,790.00 VAT: €3,190.10 Gross: €19,980.10 Financing available! Technical Data Lifting capacity: 1,000 kg Lifting height: 2,784 mm (lower edge of standard pallet fork) Dumping height: 2,250 mm (standard bucket fully tilted) Engine: 4-cylinder Yunnei Power: 25 hp Emission standard: Euro 5 Drive: Torque converter All-wheel speed: 0–20 km/h Dimensions: 3,860 x 1,650 x 2,580 mm Weight: 2,540 kg Prsdpfsvx Tcwox Afwed Standard tires: 31 x 15.5 - 15 Accessories and spare parts available. Please provide your phone number with your inquiry!

Sąlyga: naudotas, Gamybos metai: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine number: 08113 Nominal power: 41 kW Workpiece feed: Glide chain Fence ruler: Adjustable fence ruler 700.080 Podpfx Afernkw Dewsrd Infeed table: 63.152 Milling unit: 08.378 Glue level sensor: Available Glue application unit: 04.0832 Bonding unit: 04.1570 PU premelter: 283.203 High-speed tool holder: For high-speed motors End trimming unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping device: 08.516 Flat scraper: 08.517 Profile copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety equipment: Light barriers, temperature controller, control terminal Additional equipment: Pre-mounted roller conveyor table Total machine length: Approx. 11 / 16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edging coils, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma units Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, various table lengths Round belt conveyor table Control cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system