Dvigubas. FORMATO KRAŠTŲ APKLIJAVIMO MAŠINA

HOMAG KFR 620 / 19 / QA / 25

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Pjdpjiidm Nofx Alcorc Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Prodpfx Aegwbbqslcoc Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), WEINIG window production line Pjdpfx Aeh H Iyxjlcerc comprises: Unirex 3000 machining center Univar 15 Unitex 15

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Prodpfei Hn Srsx Alcec Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Būklė: naujas, Gamybos metai: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Pedpji Hplkofx Alcorc Weight: 850 kg

Būklė: naudotas, Gamybos metai: 2014, ruošinio svoris (maks.): 25 000 kg, bendras ilgis: 10 000 mm, bendras aukštis: 6 000 mm, bendras plotis: 10 000 mm, bendras svoris: 60 000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC vertikalus tekinimo centras Modernizacija: 2014 m. atlikta modernizacija, įdiegta „Siemens SINUMERIK 840D SL“ valdymo sistema. Darbinis plotas: Tiekiamo ruošinio skersmuo: 2800 mm Maksimalus apsisukimo skersmuo / tekinimo skersmuo: 3000 mm Maksimali stalo apkrova: 25 000 kg Maksimalus tekinimo aukštis: apie 2100 mm X ašies eiga: ±1550 mm Z ašies eiga / pagrindinio stūmoklio eiga: 1500 mm Pagrindinis variklis ir verpstės: Pagrindinis variklis: „Siemens“ pagrindinis variklis Variklio galia: 130 kW Maksimalus verpstės sukimosi greitis: 4500 aps./min. Darbo režimas: S6, 40 % Įranga: 2 vertikalios verpstės Įrankių keitiklis ir papildoma įranga: 2 automatiniai įrankių keitikliai Aušinimo ir tepimo sistema Podpfszmkzpjx Alcsrc Skiedrų išvežimo sistema Alyvos rūko ištraukimo sistema 2 atskiri hidrauliniai agregatai Veikimo valandos: apie 12 571 valanda, pagal mechaninį valandų skaitiklį Stalo skersmuo: 2800 mm Valdymas: „Siemens SINUMERIK 840D SL“ Didžiausia detalės svoris: 25 000 kg Apsisukimo skersmuo: 3000 mm Maksimalus tekinimo aukštis: 2100 mm Apytikslis svoris: 60 000 kg Matmenys (ilgis x plotis x aukštis): apie 10000 x 10000 x 6000 mm Pagaminimo metai: 2014 Būklė: gera Apmokėjimo sąlygos: 100 % išankstinis apmokėjimas prieš atsiėmimą Pristatymo sąlygos: EXW (nuo gamyklos) Įrenginys prijungtas prie elektros: ne

Būklė: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Control system: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Podpsh Ryhnofx Alcjrc Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Predpfx Aodh Tfgelcoc Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), Automatic slot mortising machine with two tables and oscillating ends BALESTRINI 2CAP Maximum tenon length: 120 mm Maximum mortising depth: 80 mm Spindle speed: 9,000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Prsdpfogmucpjx Alcoc Pneumatic workpiece clamping Overall dimensions: 1000 x 900 x 1250 mm Weight: 500 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, length: 8750 mm, width: 5250 mm. Pedpfxeqvnl Te Alcsrc