Tvirtinimo plokštelė

Homag Größe 10930/500/H262 mm

Būklė: geras (naudotas), Gamybos metai: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Stroke up): 1,000 mm Dkjdev Rwu Ujpfx Alxju Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Downward speed: 48 mm/s Upward speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Overall dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations. Equipped with oil-hydraulic drive, pressure-, time- and stroke-dependent control, front light barrier (Sick), two-hand operation.

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Dksdor A Hcbjpfx Alxsu Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: naudotas, Gamybos metai: 1988, Atstumas tarp centrų: 1200 mm Sukimosi greitis A) 70–380 aps./min. Sukimosi greitis B) 380–2000 aps./min. Svoris: 2,2 t Tekinimo staklės +++++ Dkjdpek Sat Djfx Alxju Atkreipkite dėmesį, kad įrenginys yra išardytas ir paruoštas pakrovimui. Dėl šios priežasties negalima jos parodyti įjungtos arba padaryti vaizdo įrašo. Mūsų skelbime pateiktos pačios informatyviausios ir geriausios kokybės nuotraukos. Deja, papildomų nuotraukų atsiųsti negalime. +++++

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, X ašies eiga: 8 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 500 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, bendras plotis: 5 800 mm, bendras aukštis: 4 500 mm, bendras ilgis: 13 500 mm, stalo ilgis: 10 000 mm, stalo plotis: 1 250 mm, Travelling column – high performance, precision, and machining capability Linear RAM guide combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with through-spindle coolant at 15 bar Chip conveyor BLUM 3D measuring probe Wide bed, linearly guided on the X-axis, traverse path W = 930 mm Rotary table drive pre-installed in electrical cabinet X-Axis: 8,000 mm Y-Axis: 1,300 mm Z-Axis: 2,500 mm Table length: 10,000 mm Dkjdpoyr Dmdjfx Alxju Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feedrate: 35,000 mm/min Y-axis feedrate: 40,000 mm/min Z-axis feedrate: 40,000 mm/min Milling head auto-indexing: 0.001 x 0.001 deg Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, these details do not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Dkedpfx Aljw T Tcwjxou Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Gamybos metai: 1995, būklė: naudotas, mašinos/transporto priemonės numeris: 18891, Tractive force: 10 tons. Stroke: 1000 mm. 3 ejector stations. With chip conveyor and platform for above-ground installation, including safety door. Dkedpfx Asbrcmkslxsu

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Offered is a double-spindle pick-up turning machine EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine can be used for machining either 2 identical parts in the same operation or a single part in two consecutive operations. Depending on requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL Siemens 840 Dsl TECHNICAL DATA Workpiece diameter: max. 440 mm Workpiece height: max. 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with live tooling Dkjdpfx Aljt Du Tdjxsu Price, delivery time and machine configuration upon request.

Būklė: naudotas, Gamybos metai: 1999, Spaudimas 130 t Lenkimo ilgis 3550 mm Stovų tarpas 3060 mm Įmontavimo aukštis 510 mm Valdymas Cybelec DNC 80 Įkirpimo gylis 320 mm Eiga 250 mm Darbo aukštis 900 mm Dkodsvxwqfopfx Alxsu Staklių svoris apie 12000 kg Užimama vieta apie 4,05x2,1x2,85 m Valdymo sistema Cybelec DNC 80 Y1;Y2;X;R ašys Matricos poslinkis su rankenėle 4 atraminiai pirštai Hidraulinis štampo tvirtinimas WILA Hidraulinis matricos tvirtinimas Amada sistema 2 atraminės svirtys Saugus valdymas dviem rankomis / pedalu Įvairūs štampai ir matricos

Būklė: naudotas, Gamybos metai: 1972, max. pulling force: 10 t Djdpfxocdtnhj Alxjku max. stroke: 1,250 mm max. cutting speed: 10 m/min max. return speed: 25 m/min broaching stations: 3 passage width: 470 mm distance between broaching stations: 125 mm table: 400 x 400 mm special features: chip removal via permanent magnet chip conveyor 1 hydraulic system, 1 working platform, electric-hydraulic shank and end piece holder lock, automatic loading device

Būklė: naujas, Load capacity 15,000 kg Height 790 - 1,150 mm Width 1,200 mm Height adjustable (yes/no): yes Height adjustment 790 - 1,150 mm Support surface 120 x 1,200 mm Dodpfx Asgvkaqolxeku Support stand, assembly stand, steel trestle, welding table, assembly table, steel trestle, work stand - Our support stands are characterized by their robust construction, exceptional load-bearing stability, and virtually indestructible durability. - Powder-coated in RAL 5010 gentian blue - CE marking - Transport on request