Vidinio pratraukimo staklės

Hoffmann RISZ 10x1250x400

Gamybos metai: 1980, būklė: naudotas, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 pcs weight: 4.8 t automatic tool feeder hydraulic clamping for drawing head and end piece holder automatic loading device for workpieces up to 100 mm diameter Bsdpfscdtplsx An Heln magnetic strip chip conveyor

Būklė: naudotas, Gamybos metai: 1973, Spindle diameter: 130 mm X travel: 3000 mm Y travel: 2000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3000 mm Y – Spindle head vertical: 2000 mm Z – Spindle stroke: 1000 mm Table plate (lower): 3300 x 2400 mm Load capacity per m²: 10 t/m² Built-up table approx.: xx,000 mm Min./Max. position of work spindle above table: 770 / 2770 mm Feed: 0.9 – 2000 mm/min Rapid traverse for spindle head and column: 5000 mm Quill feed: 0.5–1200 mm/min Speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Infinitely variable spindle speeds and feeds, separately motor-driven feeds - Travelling operator platform, pendant control panel, hand-held remote, platform - Hydrostatic guideway in column traverse - Clamp plate 3,200 x 2,500 mm planed, with T-slots; add-on table approx. 1400 x 2600 x 900 mm high, one side face machined - Hydraulic clamping for column/carriage, motorized tool clamping - Extensive accessories, particularly tool holders with and without tools Separate chip extraction unit, clamping aids, 1 clamping angle plate and plates, and much more Bjdpfx Aot Hwt Sjn Heln

Gamybos metai: 1971, būklė: labai geros būklės (naudotas), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Bodjhpqqujpfx An Hsln Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Gamybos metai: 2020, būklė: naujas, 1000 l/h Stainless steel frame on 4 adjustable feet Minimum/maximum level sensor in the pressure tank Stainless steel pressure tank The product is injected into the tank via a multi-nozzle head; Product pump: Check valve at the product inlet Sight glass at the product inlet CO2 pressure control valve for mounting on the CO2 cylinder Sight glass in the pressure tank Max. pressure: 6 bar incl. electronic control system incl. booster pump Blodpfx Aecx Smbjn Hjn

Būklė: geras (naudotas), Gamybos metai: 1998, Press force: 315.00 t Bjdev Rwu Uepfx An Holn Stroke: 500 mm Throat depth: 425 mm Daylight (Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Downward speed: 48 mm/s Upward speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Overall dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations. Equipped with oil-hydraulic drive, pressure-, time- and stroke-dependent control, front light barrier (Sick), two-hand operation.

Gamybos metai: 1990, būklė: naudotas, mašinos/transporto priemonės numeris: 9072492, Nominal power: 100 kVA Outreach: 500 mm Electrode arm spacing: 330 - 500 mm electrical connection: 400 V kW Blsdpfxoz H Dys An Hsn Space requirements: 700 x 1420 x 2000 mm Weight: 750 kg

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Bljdpfx Aegyd T Een Hsn Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Bledper A Hcbsfx An Hsn Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, X ašies eiga: 8 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 500 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, bendras plotis: 5 800 mm, bendras aukštis: 4 500 mm, bendras ilgis: 13 500 mm, stalo ilgis: 10 000 mm, stalo plotis: 1 250 mm, Travelling column – high performance, precision, and machining capability Linear RAM guide combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with through-spindle coolant at 15 bar Chip conveyor BLUM 3D measuring probe Wide bed, linearly guided on the X-axis, traverse path W = 930 mm Rotary table drive pre-installed in electrical cabinet X-Axis: 8,000 mm Y-Axis: 1,300 mm Z-Axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feedrate: 35,000 mm/min Y-axis feedrate: 40,000 mm/min Bledpeyr Dmdofx An Hon Z-axis feedrate: 40,000 mm/min Milling head auto-indexing: 0.001 x 0.001 deg Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, these details do not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Blsdpfew T Tcwex An Hjn Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.