Dvigubo galo profiliavimo įrenginys

Homag FLO 22

Sąlyga: paruoštas naudoti (naudotas), darbinis plotis: 2 600 mm, Double End Tenoner Manufacturer: Homag Model: FLO 22 Workpiece width, min. approx. 190 mm – 2600 mm Workpiece thickness: 8 – 90 mm Adjustable workpiece overhang: 10 – 120 mm Working height from floor: 905 mm Feed speed steplessly adjustable: 5-25 m/min Magnetic braking for feed motor Electronic width adjustment, positioning in rapid/traverse mode, Hfjdpfx Absxl Udxjmjr Adjustment speed max. 3 m/min Transport chain with cams, cam pitch 900 mm, cam height adjustable up to 20 mm Infeed on left side of machine Equipped per side with 3 motors: Scoring unit: 1.5 kW controlled, motor brake, 100 Hz, 6000 rpm, for tool diameter max. 180 mm Chipper: 4.5 kW, motor brake, 100 Hz, 6000 rpm, 15° swivel, for tool diameter max. 250 mm Milling motor: 4.5 kW, electropneumatic control for plunge milling, motor brake, swivel range 90 degrees, 100 Hz, 6000 rpm, reversing switch for rotation direction, extraction hood, tool diameter max. 200 mm Provision for installation of a standard milling unit Complete with frequency inverter 30 kVA, 100 Hz, IP 54

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Hfjdpfx Abewzmu Rjmor Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Sąlyga: naudotas, • Workpiece width: min. approx. 190 mm - max. 2600 mm • Workpiece thickness (mm): 8 - 90 • Adjustable workpiece overhang (mm): 10 - 120 • Working height from floor (mm): 905 • Feed rate continuously adjustable (m/min): 5 - 25 • Magnetic braking of feed motor • Max. adjustment speed (m/min): 3 • Transport chain with cams: cam spacing 900 mm, cam height adjustable up to 20 mm Hjdpfx Ajur Uzqobmjfr 3 motors per side: • 1st scorer: 1.5 kW controlled • 2nd cutter: 4.5 kW, swivelling 15° • 3rd milling motor: 4.5 kW, electro-pneumatic control for plunge milling, swivel range 90° • Free position: for mounting a standard milling unit

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Celaschi panel saw 4+4 motors Opening width 3000 mm Option for complete overhaul available Hfsdjvx Afnepfx Abmjr

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power Hedewhmdfepfx Abmsfr No. 4 machining groups (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Chain mortising machine with additional unit, consisting of two horizontal milling cutters for producing the handle and keyholes, and two adjustable, motorized, swiveling drilling units for creating slots. Vertical working unit: - Maximum workpiece thickness: 230 mm - Maximum workpiece height: 710/1050 mm - Vertical stroke length: 150 mm - Horizontal stroke length: 300 mm - Traverse head stroke: 80 mm Hedpjlpcffofx Abmjfr - Head tilt: +/- 45 degrees - Vertical spindle stroke: 250 mm - Unit swivels +/- 45 degrees - Motor power: 2.2 kW, 400V, 50 Hz Horizontal working unit: - Number of drilling units: 2 - Min./max. longitudinal stroke: 80/130 mm - Manual travel: 140 mm - Pneumatic transverse stroke: 140 mm - Drill motor power: 0.18 kW, 400 V, 50 Hz - Router motor: 1.8 kW, 400V, 50 Hz Weight: approx. 650 kg Includes pump for automatic chain lubrication Includes tools Includes manual Note on used machines: • Technical data and prior sale subject to change. • Stated prices are ex-location, loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Gamybos metai: 2018, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vacuum Membrane Press Wemhöner Type VARIOPRESS Model Basic 1000 S Technical Data: Heated platen size (mm): 2850 x 1550 Heating plate configuration: Upper electrical heating plate in aluminium Total pressing force (kN): 2400 Maximum chamber pressure (bar): 6 Maximum operating temperature: 180 degrees Celsius Maximum batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film on rolls: film width approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Hjdpfsv Np H Hox Abmefr Connections: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981 with walk-in sound insulation cabin KASCHWIG – ALMOST NEW from year 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed, 6–60 m/min • Feed motor 22.0 kW • 4 driven table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter bearing • Spindles 1 + 4 with straight jointer Hfedetkt Tpopfx Abmjr • Feed rollers 170 mm • Approx. 10 hydro-planing cutterheads • Extraction hood above the machine

Sąlyga: beveik kaip naujas (naudotas), Four-Sided Planer Weinig Hydromat H22N - German-made - Technical documentation included - Year of manufacture: 1992 - Two feed rollers in the table before the first cutterhead - Suitable for wet wood TECHNICAL PARAMETERS: - Planing width: 220 mm - Planing height: 140 mm - Spindle diameter: 50 mm 1st bottom cutterhead: 7.5 kW 2nd right cutterhead: 7.5 kW 3rd left cutterhead: 11 kW 4th top cutterhead: 7.5 kW 5th bottom cutterhead: 11 kW Hydraulic feed Feed pump motor power: 15 kW Infinitely variable feed speed up to 60 m/min Feed via cardan shafts Electric height adjustment Pneumatic hold-downs Five infeed rollers in the table Eight upper steel feed rollers One upper rubber feed roller Supports on horizontal spindles Hjdpjpvi Skefx Abmjfr Jointers on bottom spindles Transport dimensions: 500 x 200 x 160 cm Weight: 4 t

Sąlyga: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: nepatikrintas, darbinis plotis: 220 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 50 mm, obliavimo plotis: 220 mm, darbinio aukščio: 120 mm, bendras svoris: 7 500 kg, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: trifazis, ašies skaičius: 10, galia: 105 kW (142,76 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 8-40 m/min, Spindle arrangement: Hedpfxju Udd Sj Abmsfr 1-Bottom (7.5 kW) - with hydro clamping 2-Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW) - with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydro clamping 7-Bottom (7.5 kW) - with hydro clamping 8-Top (7.5 kW) - with hydro clamping and straight jointer 9-Bottom (7.5 kW) - with hydro clamping and straight jointer 10-Universal (7.5 kW) 6 powered rollers in the table