5 ašių CNC apdirbimo centras

Homag CENTATEQ P-110

Būklė: naudotas, mašinos/transporto priemonės numeris: 008469, Darbinis plotis X ašis: 3050 mm Darbinis plotis Y ašis: 850 mm Valdomų ašių skaičius: 3 ašys Gręžimo velenų skaičius: 19 Giodjywafuopfx Ah Aot Įrankių vietų skaičius: 4

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min Gsdpfxev I Akve Ah Aoit - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Giodpfxexy Tmne Ah Ajt Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Gedeh E Sghepfx Ah Aoit Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Spindle speed: 18,000 rpm Dismantled - available immediately

Būklė: naudotas, Gamybos metai: 2000, with electric height and tilt adjustment Used, top condition, low operating hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-certified Motor: 4 kW Steel guides Gedjvxlq Hepfx Ah Ajit Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm Tiltable up to 45° Scoring unit preparation Parallelogram guard Table extension Aluminium parts anodised Height adjustment: electric Tilt adjustment: electric Digital display: - Cutting angle - Speed Extraction port: D 120/80 mm Required space: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Darbo eiga Darbo sritis 1: X: 6450 mm, Y: 1535 mm, Z: 250 mm; Darbo sritis 2: X: 6200 mm, Y: 1535 mm, Z: 250 mm; Darbo sritis 3: X: 6200 mm, Y: 1520 mm, Z: 275 mm. Ašių eiga, konfigūracija 1: X: 6820,5 mm, Y: 1963 mm, Z: 350 mm. Ašių eiga, konfigūracija 2: X: 6820,5 mm, Y: 1963 mm, Z: 350 mm. Ašių eiga, konfigūracija 3: X: 6820,5 mm, Y: 1963 mm, Z: 663 mm (5 ašių galva), Z: 350 mm (papildomos apdirbimo stotys). Valdymo sistema: Biesse XP600. Techninė priežiūra: 2015 m. visiškai atnaujota C ašis su visais priedais; 2016 m. visiškai pakeista vakuuminė pompa, įskaitant gofrus, žarnas ir kitus komponentus; 2021 m. įrengta nauja didelio našumo valdymo kompiuterinė sistema su naujausia Windows 10 operacine sistema. Detali dokumentacija. Galima apžiūrėti vietoje. Gsdpfxoylziis Ah Asit

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, X ašies eiga: 4 000 mm, Y ašies eiga: 1 670 mm, Z ašies eigos atstumas: 500 mm, ašių skaičius: 4, Šis 4 ašių CNC apdirbimo centras buvo pagamintas 2020 m. Jame įrengtas 12 kW frezavimo suklys, kurio sukimosi dažnio diapazonas yra 1000-24000 aps/min, o C ašies sukimosi kampas - 0-360°. Staklėse yra 12 stočių linijinis įrankių keitiklis ir visapusiška gręžimo galvutė su 16 suklių. Ji taip pat gali pasigirti patikima saugos sistema su šviesos barjeru. Apsvarstykite galimybę įsigyti šį "Felder Format 4 Profit H 200" CNC apdirbimo centrą. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. • Automatinis centrinis tepimas • Darbinis plotas: X 3300 mm / Y 1280 mm / Z 250 mm (atstumas nuo konsolės lygio priklauso nuo prispaudimo sistemos) Gedpfx Ahjx D D Hmo Aeit • Valdymo terminalas kairėje mašinos pusėje • Rankinis terminalas su ašies greičio valdymu ir avariniu stabdymu • Programinė įranga: "Woodflash" (CNC plokštė, įrankių duomenų bazė, programų redaktorius) • Ruošinio atramos ir vakuuminių siurbtukų padėties nustatymo ekranas • Vakuuminė jungtis šablonų frezavimui (kairėje pusėje), jungties skersmuo 12 mm • Vakuuminis siurblys: Vakuuminis siurblys: 1x, bendra siurbimo galia 90 m³/h @ 50 Hz arba 108 m³/h @ 60 Hz • Frezavimo velenas: 12 kW (S6), HSK F63, 1000-24 000 aps/min, visa vardinė galia ~12 000 aps/min, aušinama oru; C ašis 0-360° • Įrankių keitimo įrenginys: 12 stočių linijinis kairėje staklių stendo pusėje, įskaitant agregatų paėmimo vietą; maks. įrankio skersmuo 250 mm; maks. įrankio ilgis 240 mm • Gręžimo galvutė DH 16 4H 2S: 12 vertikalių velenų (7X / 5Y); 4 horizontalūs velenai (2X / 2Y); išankstinė eiga 70 mm; gręžimo ilgis 70 mm; kotas Ø 10 mm • Griovelių pjūklai: 2 (vienas X, vienas Y); maksimalus ašmenų Ø 120 mm; maksimalus storis 5 mm; be perstojo keičiamas greitis iki 7500 aps/min. • Sauga: priekinė šviesos barjerų sistema

Būklė: naudotas, CNC apdirbimo centras BIESSE Rover C 6.50 CONF.2, 2007 metai Gsdpfx Asw Rpd Seh Ajit Darbo zona: apie 140 × 460 cm Staklių matmenys: 300 × 650 cm Svoris: apie 6 100 kg Dvi darbinės galvos Įrankių sandėlis: 22 pozicijos Vertikalūs gręžimo velenai: 28 vnt. Horizontalūs gręžimo velenai: 12 vnt. Kaina derinama, galima iškart. Kaina nurodyta be PVM.

Būklė: naudotas, Gamybos metai: 2014, bendras aukštis: 2 800 mm, bendras ilgis: 6 900 mm, bendras plotis: 2 800 mm, Color: Grey Unladen weight: 6,100 kg - Special features: - Description: Repair to B-axis and seal leakages required - Year of manufacture: 2014 - Documentation available: No - CE certificate available: No Gijdsyr Rnuepfx Ah Ajt - Serial number: 10333 - Number of milling spindles [pcs]: 2 - Milling spindle 1: - Number of controlled axes [pcs]: 5 - Milling spindle 2: - Number of controlled axes [pcs]: 3 - Milling table type: Beam table - Drilling tool included: Yes - Tool changer positions [pcs]: 45 - Vacuum pump included: Yes - Number [pcs]: 2 - Brand: Becker - Type: Vtlf 2.250 - Year: 2011 - Main motor power [kW]: 5.5 - Capacity [m³/h]: 244 - Connection diameter [mm]: 60 - Vacuum [mbar]: 200 - Oil-free: Yes - Tools included: Yes - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Power consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (L x W x H) - Transport weight [kg]: 6,100kg - Transport packages [pcs]: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector Glenn Smeets

Būklė: naudotas, Gamybos metai: 2018, Price: On request CNC Machining Center SCM ACCORD 25 FX Brand: SCM Model: ACCORD 25 FX Year of manufacture: 2018 Machine No.: AA10000992 Table dimensions: 5020 x 1380 mm (L x W) Worktable equipped with 2 vacuum zones Worktable equipped with 2 reference stops Includes 8 reference pins and 8 supports XY vector speed: 35 m/min Axis movements Maximum speed X-axis: 25 m/min (per space) Maximum speed X-axis: 90 m/min (per speed) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Control Machine control: KVARA control Windows Embedded Standard 7-64bit Hard drive capacity: 500GB - 7200rpm Microprocessor: Intel Pentium - 2.9GHz RAM: 8GB DDR4 XILOG-MAESTRO software package Includes vacuum pump Motor power: 5.5 kW Pump capacity: 250 m³/hour Maximum vacuum: 0.9 bar Overall dimensions: 9000 x 4500 x 3000 mm (L x W x H) Total weight: 7,500 kg Godpfxoycwupo Ah Asit - Year of manufacture: 2018 - Documentation available: No - CE certification available: Yes - CE certificate available: No - Serial number: AA10000992 - Number of router spindles [pcs]: 2 - Router spindle 1: - Number of controlled axes [pcs]: 3 - Min. spindle speed [rpm]: 6,000 - Max. spindle speed [rpm]: 18,000 - Main motor power [kW]: 15 - Router spindle 2: - Number of controlled axes [pcs]: 3 - Min. spindle speed [rpm]: 600 - Max. spindle speed [rpm]: 24,000 - Main motor power [kW]: 12 - Type of router table: Beam table - Tool clamping system: HSK-F63 - Tool changer positions [pcs]: 12 - System/software: SCM Maestro - Safety feature: Bumper - Vacuum pump included: Yes - Number [pcs]: 1 - Brand: Becker - Main motor power [kW]: 5.5 - Capacity [m³/h]: 250 - CNC options: Waste conveyor belt - Table length [mm]: 5020 - Table width [mm]: 1380 - Working area Y [mm]: 1300 Financial Information VAT: The price stated is plus VAT VAT/differential taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets