HOMAG SIZING & EDGE BANDING-SOFTFORMING

HOMAG + MAHROS KFL 620 SOFTFORMING + Brush AUTOMATION

Būklė: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Control system: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Csdpfeh Ryhnox Anlohd Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26

Būklė: labai geros būklės (naudotas), COMPLETE DOUBLE-SIDED EDGE-AND-PROFILE PROCESSING LINE (including SOFTFORMING), with through-feed drilling machines, splitter, and high-speed automated conveyor technology. Configured as follows: A) Feeding station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided edge-banding and profiling machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided edge-banding and profiling machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) G) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) H) 3rd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 Chedpfx Asttgy Hjnlod I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Destacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. Chodpfx Ashvah Nonljd B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, 4 pusių formatavimo ir briaunų klijavimo linija Cjdpfx Aox Aqbhsnlohd Plokščių matmenys: MIN. mm 195 x 250 x 60 / MAKS. mm 1200 x 2500 x 60 Sudaryta iš šių įrenginių: O12044a) Įvado stalas „HOMAG“ mod. TBL 100/25/12/S su pavaros voleliais O12044b) 1. Dvipusė formatavimo ir briaunų klijavimo mašina „HOMAG“ mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Sukimosi stotis (90° ILGAI – SKERSAI) „HOMAG“ mod. TDL 310 / 25 / 12 O12044d) 2. Dvipusė formatavimo ir briaunų klijavimo mašina „HOMAG“ mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Būklė: labai geros būklės (naudotas), Double-sided solo machine (or 1st and/or 2nd machine in a line) Codpfett Iudsx Anlehd Edge thickness in rolls (min/max) mm: 0.3 – 3 Edge thickness in strips/bands (min/max) mm: 0.4 – 12 Panel thickness (min/max) mm: 8 – 100 Working width (min/max) mm: 240 – 3000 Control: Power Control PC22 (Windows XP), Software: woodCommander Feed speed (adjustable) (m/min): 10 – 40 Safety and soundproof enclosures Retractable reference pins, spacing (mm): 400 FORMAT PROCESSING (per side): Jointing milling unit (2 x 6.6 kW) Free space Left only: 2 x universal milling unit (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (per side): Edgebanding unit (Hot-melt glue + pre-melter) E34 Pressure roller track (revolver type) for straight and contoured edges (softforming) GL sextuple Edge magazine for rolls (single slot) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°–30°) Milling unit (2 x 0.55 kW) 0°–30° Form milling unit (copying) FF 12 (4 motors) WD70 20 m/min Profile scraper unit PN20 Finishing unit (flat scraper + smoothing unit) FA11

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: V-belt driven Spray unit (for liquid non-stick) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.378 (2 x 4.5 kW) Lamps for heating workpiece sides Gluing unit (hot melt glue + pre-melter) 04.1570 Spray unit (for separating liquid) Codpfx Anjm Udfwslohd Edge pressure zone Edge magazine for rolls (No. of compartments): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spray unit (for sliding liquid) Contour milling unit (for fine milling) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping unit (copying) 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Finishing unit 08.53

Būklė: naudotas, mašinos/transporto priemonės numeris: 008121, Montuojamos krašto tipas: plonas kraštas, storas kraštas, masyvi mediena Klijavimo sistema: PUR Daugiafunkcinis agregatas: taip Chsdpfx Aow Idhtenled Didžiausia skydo plotis: 3000 mm Didžiausias padavimo greitis: 32 m/min. Darbiniai agregatai, dešinė pusė: 10 vnt. Darbiniai agregatai, kairė pusė: 10 vnt.

Būklė: naudotas, Automatic double-cell loader without pit for use in an edging line Motorised panel infeed transfer Double automatic panel loading station Suction cup system for panel handling Panel take-off unit Panels can also be processed in double rows Usable panel width: 1300 mm Csdpfx Anorzhfhslshd Usable panel length: 3200 mm Vacuum pump Motorised transfers for the introduction of panel stacks Motorised adjustment via automatic numerical control of the horizontal suction-cup support bars Programming and control system

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, 1 Panel Dividing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – Right-hand machine Year of manufacture: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year of manufacture: 2013 Woodstore warehouse management software, offcut management, etc. Storage area: approx. 37 x 11.5 m Maximum stacking height in warehouse: 2,500 mm Speed Concept: Set entirely new standards, revolutionizing panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Enormous acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized movement sequences thanks to integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Pack turning device for cross cuts Laser guide light: for marking the cutting line on the panel for visual or scribed cutting. Lift table feed Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle stacking of delicate single panels via vacuum, and efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed rate: Forward: 1-150 m/min Reverse: constant 150 m/min Program pusher speed: Forward/Reverse: 90 m/min (In EU countries forward: 25 m/min) Automatic pressure beam height control: yes Automatic cutting height adjustment: yes Adjustable pressure beam clamping pressure: yes Adjustable gripper clamping pressure: yes Gripper release: yes Full air cushion table (saw bridge): yes Angle alignment device Min. pressing width: 0 mm Max. pressing width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 RPM Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ unit with lifting element 2-finger 11/510/530 AUTOMATIC EJECTION FENCE Program-controlled ejection of part packs onto the air cushion table area. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVING PROGRAM (AUTOMATIC) Grooving program with graphical input and process display. Positioning accuracy: Groove depth steplessly defined via control (hydraulic stop). Chsdpfx Aeyw Ivhenljd CUT-OUT/RELIEF CUT PROGRAM LABELING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermal transfer label printing station OPTIMIZATION PROGRAM ‘CAD-PLAN’ - JUST-IN-TIME - Additional 'Just-in-time' function (possible workflow options): 1. Optimization at the saw: - Import option for parts lists from industry packages, Excel, etc. - Consideration of available offcuts in the optimization - In case of production interruption, non-produced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transmission of optimized data to the saw: - Modification of optimized cutting plans on the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine jobs, etc. Afterwards, the newly optimized plan runs directly at the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF FEED AREA Material specification for lift table feed: Waviness max. 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Būklė: naudotas, mašinos/transporto priemonės numeris: 008269, Pozicija 1: Pakrovėjas IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Chjdpfxsx A Hggj Anled Pozicija 2: Plokščių vartytuvas IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 3: Dvipusė briaunų klijavimo staklės IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 4: Plokščių vartytuvas IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 5: Iškrovėjas IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3