Plokštinė pjūklas

Holzma Profi HPL 380/43/22

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, HOLZMA PROFILINE HPL 380 Pjovimo ir kėlimo stalo duomenys Pjovimo ilgis: 4 300 mm Kėlimo pjovimo dydis: 4 300 mm x 2 200 mm Plokštės matmenys automatinio padavimo kėlimo stalui maks.: 4 300 mm x 2 200 mm Plokštės matmenys automatinio padavimo kėlimo stalui min.: 1 200 mm x 400 mm Djdpfxsx Nf Eqs Affeup Krovimo aukščiai Kėlimo stalo krovimo aukštis montuojant ant grindų maks.: 560 mm Kėlimo stalo krovimo aukštis įrengiant į duobę maks.: 780 mm Kėlimo stalo naudingoji apkrova maks.: 4 t Volelių bėgiai Volelių bėgio elementas, 10 takelių: 1 vnt. Volelių bėgio elementas, 2 takeliai: 6 vnt. Spaustuvai Žingsniai: 75/275/475/1 075/1 825/2 625/3 425 mm Ištraukiamieji ir oro pagalvių stalai Pašalinimo įrenginio pozicija: 2 375 mm Oro pagalvių stalas su voleliais 2 160 x 800 mm: 1 vnt. Oro pagalvių stalas su voleliais 2 160 x 650 mm: 3 vnt. Centrinis ventiliatorius: 1 vnt. Oro pagalvių stalų purkštukų linija: 70 x 70 mm

Būklė: naujas, Gamybos metai: 2026, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Saw blade diameter: 520 mm, saw blade bore: 50 mm Djdpfx Afek H Ic Uofeup Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Būklė: naudotas, Gamybos metai: 2009, Pjovimo ilgis: 4200 mm Pjovimo plotis: 3200 mm Didžiausias pjūklo disko išsikišimas: kai pjūklo diskas vertikaliai 0° = 70 mm, kai pjūklo diskas pakreiptas 45° = 50 mm Pavaros greitis pirmyn: 0–80 m/min Grįžimo greitis: 100 m/min Svoris: apie 5400 kg Variklio galia: 14 kW Priepjovio galia: 1,5 kW Įrankis: skersmuo: 350 mm Kiaurymė: 30 mm Siurbimo jungtis apačioje: 140 mm Siurbimo jungtis spaudimo sijoje: 100 mm Sandėliavimo vieta: Tiekėjas Djdpfsyf Nu Tsx Affsup

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Panel dividing system SCHEER FM 16 – DNC 3100 x 3100 As-new condition – Machine no. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and intuitive controls. The machine has been completely overhauled and newly painted – its condition is virtually as new. Ideally suited for precise, automated cutting of wood-based materials in continuous industrial operation. Dedpfx Aounwk Tsffeup Key technical data: Cutting length: 3100 mm Cutting depth / Blade projection: 80 mm Saw motor: 7.0 kW Scorer motor: 1.1 kW (can be switched off) Feed rate: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Control interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoders – for maximum positioning accuracy and control dynamics Features & Highlights: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse travel HP 5021 material feed table with 6 clamp slides, servo drive & measurement resolution of 0.05 mm Angular pressure unit WP, adjustment range 2400 mm, fully automatic Offcut handling unit SP 5000 for offcuts down to min. 5 mm Angle stop table HP 5024 (1800 x 800 mm), steel angle with Pertinax overlay Workpiece support table HP 5025 (1800 x 800 mm), also with Pertinax overlay Air-cushion system in the front tables including radial fan Saw blades included: KSB 4005 for main saw (ø 305 mm, Z = 60) KSB 4006 for scorer (ø 200 mm) Condition & Service: Condition: Overhauled & as new Functionality: Fully operational Warranty: 12 months Reliability for continuous operation: This machine is used worldwide – even under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g., Thailand): The SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and impresses with outstanding precision, stability, and durability. Guarantee: We are so convinced of the quality and robustness of our machines that we offer 7 years warranty on the machine construction and the guideways. (Electrical supply parts and wear parts excluded.) Flexibility & Customization: We offer various models and equipment options – for any budget. Furthermore, we realize custom, made-to-order solutions according to your individual requirements. 📞 Contact us for a tailored quote or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Būklė: geras (naudotas), BRANDT highflex 1440 Edgebander Well equipped, available for inspection before purchase Pre-milling cutters Glue application unit Pneumatic pre-cutting guillotine Pressure rollers Finishing saws Preliminary top/bottom milling unit 2 x Multifunction trimming/milling units Profile scraper Duodpot Hxxpsfx Affop Flat scraper Polishing unit Machine features NC-controlled milling and pneumatic package Max workpiece height: 60 mm Max edge band thickness in roll: 3 mm Max feed speed: 14 m/min Machine is well-maintained and in very good condition.

Būklė: naudotas, Gamybos metai: 2017, Number of spindles: 5 units Working width: 240 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight approx.: 3,500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Summary: ----- - 5 spindles - Powerful motors - Left and top spindles controlled for width and height - With return system for workpieces to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorised width adjustment Dsdpfjwwl Nlox Affsup 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return system Including used planing heads currently installed. (Technical specifications according to manufacturer – subject to verification!)

Būklė: naudotas, Water-Curtain Spray Wall Reinox, 2,500x2,300mm - Manufacturer: Reinox - Model: WW 25/22 - Width: 2,600 mm Dusdpfxsumvtqj Affsp - Height: 1,700 mm (2,250 mm) - Depth: 1,640 mm - Overall installation dimensions: 2.75 x 2.45 x 1.65 m - With water-curtain exhaust system - With water recirculation pump - Extractor fan motor power: 4.2 kW - Exhaust duct diameter: 2 x 350 mm - Equipped with control cabinet - Stainless steel construction - Voltage, frequency: 400 / 500 - Location: in stock - Voltage fluctuation tolerance: max. +/- 5%

Būklė: naujas, Vollautomatische Blockschneidemaschine für Palettenfüße. Maximale Rohmateriallänge: 6 m. Die Maschine ist für alle Arten der Palettenproduktion geeignet. Die OKKR-2006 kann als eigenständige Maschine betrieben oder in eine Produktionslinie integriert werden. Funktionsweise: Das Blockmaterial wird der Maschine über das Ketteneinlaufband zugeführt. Die Zuführung erfolgt vollautomatisch und die Maschine schneidet die Blöcke auf die voreingestellte Länge. Die OKKR-2006 kann programmiert werden, um mehrere unterschiedliche Blocklängen aus einem Stück Rohmaterial zu schneiden. Die maximale Rohmateriallänge beträgt 6 m. Abmessungen des geschnittenen Blocks: Min./Max. Länge: 600 mm – 6.000 mm Min./Max. Breite: 75 mm – 150 mm Min./Max. Stärke: 75 mm – 100 mm Technische Daten: Bedienpersonal | 0 Länge | 7,5 m Djdpswdutmsfx Affsup Breite | 2,5 m Höhe | 1,8 m Leistung | 7 kW, 3x400 V+N Pneumatik | 7 bar, getrocknete Druckluft: 450 l/min Wartung | Schmierstellen müssen regelmäßig befüllt und kontrolliert werden Maschinenleistung | 36 Blöcke/min Standardausstattung: 1 Elektromotor für das Sägeblatt 1 Elektromotor für den Materialeinlauf 1 Elektromotor für die Kettenzuführung Mychrome bietet verschiedene Zusatzmodule an, die einfach an bestehende Maschinen angedockt werden können, um einen höheren Automatisierungsgrad zu erreichen. Die Möglichkeit zur Änderung der Palettenkonstruktion und -größen bleibt auch mit Zusatzeinheiten vollständig erhalten.

Būklė: naudotas, Gamybos metai: 2017, Direct numerical control NC HOPS with Campus software Working area in X-axis mm 3400 Working area in Y-axis mm 1600 Working area in Z mm 300 Worktable with 6 adjustable rails No. 3 suction cups per rail for holding the workpiece No. 1 electrospindle with 5 axes, 10 kW, with automatic tool change, cone type HSK F63 Drilling head with 24 spindles as follows: 12 vertical spindles along Y-axis, 6 vertical spindles along X-axis, 4 horizontal spindles along Y-axis, 2 horizontal spindles along X-axis Automatic tool changer system with 18 positions - located at the rear of the machine Front guard and safety system with mats and perimeter nets Automatic lubrication system Air conditioning for the control cabinet No. 1 vacuum pump Duodpfx Aewwiybsffop

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. clamp jaw opening: 90 mm Min. panel dimensions from the rear: 1,830 x 915 mm Max. panel dimensions from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of the scorer relative to main saw QUICK CHANGE: rapid blade change at the touch of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on the pusher with double fingers 3 front aligners 16 support roller rails behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement mechanism for table 2 Automatic ejection of end pieces beyond the cutting line Material support surface under pusher with brush-lined rollers, suitable for sensitive surfaces Machine table with air nozzles for delicate surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring the main spindle speed Duodpfxsxranpo Affop Software package: - QUICKOPTI for cutting pattern optimization directly at the machine - OSI PLUS INTERFACE VERSION - OPTIPLANNING optimization software incl. hardware dongle, permits management of up to 10 users via network - OS LABELLING: graphic editor in the machine control, including drawing of workpieces, real-time label printing at the machine possible - COMMUNICATION STORAGE FEED SYSTEM - SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotating suction frame 0 - 180 degrees equipped with controlled axis Panel alignment/squaring system consisting of 3 photoelectric cells mounted on pneumatic cylinders Panel weight detection via load cell installed on the suction frame in the separation area, checks whether the specified weight is within the expected range for this panel type. If not, the panel is set down again and the separation cycle is restarted. Roller conveyor for loading and unloading stacks 4,200 mm Software: LINE SUPERVISOR with storage mapping, catalog, import of processing data from the optimizer, management of parts lists, system control