Briaunų apklijavimo mašinaHOLZ-HER
Sprint 1317 - 2
Briaunų apklijavimo mašina
HOLZ-HER
Sprint 1317 - 2
Gamybos metai
2008
Sąlyga
Naudotas
(visiškai funkcionalus)
Vieta
Nordrhein-Westfalen 

Stebėti aukcioną
Duomenys apie mašiną
- Įrenginio aprašas:
- Briaunų apklijavimo mašina
- Gamintojas:
- HOLZ-HER
- Modelis:
- Sprint 1317 - 2
- Gamybos metai:
- 2008
- Sąlyga:
- paruoštas naudoti (naudotas)
- funkcionalumas:
- visiškai funkcionalus
Techniniai duomenys
- X ašies padavimo greitis:
- 18 m/min
- Briaunos storis (maks.):
- 8 mm
- Produkto aukštis (maks.):
- 45 mm
- Gaminio ilgis (min.):
- 180 mm
teikimas
- Vieta:
- Nordrhein-Westfalen, Vokietija
– Atstumas: apie 1 153 km
- Prieinamumas:
- nedelsiant po aukciono pabaigos
- Pristatymo sąlygos:
- FCA
Išmontavimo ir pakrovimo išlaidos:
2 000,00 € (privaloma)
2 000,00 € (privaloma)
Atsiėmimas vietoje:
nemokamai
nemokamai
Pristatymo išlaidos:
Aprašymas
TECHNICAL DETAILS
Control: Edge Control with 18.5" touchscreen color display (16:9)
Control Panel: Swiveling
Program memory: Available
Pressure bridge adjustment: Motorized
Feed: Via transport chain
Feed speed: 8 - 18 m/min
Workpiece support: Extendable
Infeed guide: Motorized adjustable
Edge thickness (coil material): 3 mm
Edge thickness (strip material): 8 mm
Max. edge thickness for corner rounding: 3 mm
Workpiece thickness: 45 mm
Workpiece thickness for corner rounding: 45 mm
Minimum workpiece length: 180 mm
Hnjdpfjvzybljx Acuou
Distance workpiece support: 470 mm
Support plate Ø for edge material: 800 mm
Milling and Processing Units
Jointing unit: 1961
Cutter type: Diamond jointing cutter (climb and counter rotation)
Workpiece height adjustment: Automatic
Edge Feeding & Adhesive Application
Edge feeding: 1903
Pre-cutting: Up to 3 x 45 mm (depending on material)
Adhesive application system: 1905 Multi-System
Adhesive height adjustment: Automatic with sensor nozzle
Pressure regulator: For adjusting cartridge application pressure
PUR adhesive use: Possible
Pressure & End Trimming Unit
Pressure section: 1913 MOT
Drive: 1st roll driven
End trimming unit: 1918, pneumatically adjustable
End trimming saw: Pneumatically tiltable
Milling and Edge Processing
Multi-function unit: 1824 MOT 4
Cutter: Multi-radius cutter, radii 1,2,3 mm
Corner copying unit: 1832
Corner copying function: Up to 3 mm edge thickness
Radius scraper: 1929 MOT 2
Copy roller adjustment: Motorized (horizontal)
Pneumatic adjustment: Top and bottom independently
Cleaning & Polishing
Chip collection box: For radius scraper
Flat scraper: 1964 (for removing adhesive residues for a clean glue joint)
Extraction hoods: Provided
Spraying device: 1856 for infeed and outfeed areas
Buffing unit: 1940 (for subsequent cleaning and edge polishing)
Performance Data & Extraction
End trimming blade for coil material up to: 3 mm
Heating up time: 3.5 min
Jointing cutter power: 2 x 2 kW
End trimming saw power: 2 x 0.22 kW
Milling station power: 2 x 0.35 kW
Corner copying power: 0.22 kW
Extraction port jointing unit: 120 mm
Extraction port milling unit: 70 mm
Extraction port scraper unit: 70 mm
MACHINE DETAILS
Total length: 5,350 mm
Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm
EQUIPMENT
- Swiveling control panel
- Program memory
- Motorized pressure bridge adjustment
- Feed by transport chain
- Extendable workpiece support
- Motorized infeed guide
- Diamond jointing cutter (climb and counter rotation)
- Automatic workpiece height adjustment
- Pre-cutting up to 3 x 45 mm (material-dependent)
- Adhesive application system with automatic adhesive height adjustment and sensor nozzle
- Pressure regulator for cartridge pressure
- PUR adhesive usable
- Pressure section with driven 1st roll
- End trimming unit with pneumatic adjustment
- Pneumatically tiltable end trimming saw
- Multi-function unit for radii 1, 2, 3 mm
- Corner copying unit up to 3 mm edge thickness
- Radius scraper with motorized copy roller adjustment
- Chip collection box for radius scraper
- Flat scraper for clean glue joint
- Extraction hoods
- Spraying device for infeed and outfeed areas
- Buffing unit for final cleaning and edge polishing
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Control: Edge Control with 18.5" touchscreen color display (16:9)
Control Panel: Swiveling
Program memory: Available
Pressure bridge adjustment: Motorized
Feed: Via transport chain
Feed speed: 8 - 18 m/min
Workpiece support: Extendable
Infeed guide: Motorized adjustable
Edge thickness (coil material): 3 mm
Edge thickness (strip material): 8 mm
Max. edge thickness for corner rounding: 3 mm
Workpiece thickness: 45 mm
Workpiece thickness for corner rounding: 45 mm
Minimum workpiece length: 180 mm
Hnjdpfjvzybljx Acuou
Distance workpiece support: 470 mm
Support plate Ø for edge material: 800 mm
Milling and Processing Units
Jointing unit: 1961
Cutter type: Diamond jointing cutter (climb and counter rotation)
Workpiece height adjustment: Automatic
Edge Feeding & Adhesive Application
Edge feeding: 1903
Pre-cutting: Up to 3 x 45 mm (depending on material)
Adhesive application system: 1905 Multi-System
Adhesive height adjustment: Automatic with sensor nozzle
Pressure regulator: For adjusting cartridge application pressure
PUR adhesive use: Possible
Pressure & End Trimming Unit
Pressure section: 1913 MOT
Drive: 1st roll driven
End trimming unit: 1918, pneumatically adjustable
End trimming saw: Pneumatically tiltable
Milling and Edge Processing
Multi-function unit: 1824 MOT 4
Cutter: Multi-radius cutter, radii 1,2,3 mm
Corner copying unit: 1832
Corner copying function: Up to 3 mm edge thickness
Radius scraper: 1929 MOT 2
Copy roller adjustment: Motorized (horizontal)
Pneumatic adjustment: Top and bottom independently
Cleaning & Polishing
Chip collection box: For radius scraper
Flat scraper: 1964 (for removing adhesive residues for a clean glue joint)
Extraction hoods: Provided
Spraying device: 1856 for infeed and outfeed areas
Buffing unit: 1940 (for subsequent cleaning and edge polishing)
Performance Data & Extraction
End trimming blade for coil material up to: 3 mm
Heating up time: 3.5 min
Jointing cutter power: 2 x 2 kW
End trimming saw power: 2 x 0.22 kW
Milling station power: 2 x 0.35 kW
Corner copying power: 0.22 kW
Extraction port jointing unit: 120 mm
Extraction port milling unit: 70 mm
Extraction port scraper unit: 70 mm
MACHINE DETAILS
Total length: 5,350 mm
Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm
EQUIPMENT
- Swiveling control panel
- Program memory
- Motorized pressure bridge adjustment
- Feed by transport chain
- Extendable workpiece support
- Motorized infeed guide
- Diamond jointing cutter (climb and counter rotation)
- Automatic workpiece height adjustment
- Pre-cutting up to 3 x 45 mm (material-dependent)
- Adhesive application system with automatic adhesive height adjustment and sensor nozzle
- Pressure regulator for cartridge pressure
- PUR adhesive usable
- Pressure section with driven 1st roll
- End trimming unit with pneumatic adjustment
- Pneumatically tiltable end trimming saw
- Multi-function unit for radii 1, 2, 3 mm
- Corner copying unit up to 3 mm edge thickness
- Radius scraper with motorized copy roller adjustment
- Chip collection box for radius scraper
- Flat scraper for clean glue joint
- Extraction hoods
- Spraying device for infeed and outfeed areas
- Buffing unit for final cleaning and edge polishing
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Mokėjimų apdorojimas
- pirkimo papildomos išlaidos:
- 18 %
- Apmokėjimo sąlygos:
- 100 % išankstinis apmokėjimas
- Apmokėjimo būdai:
banko pervedimas
Pasiūlymo informacija
- Sąrašo ID:
- A18534441
- Nuorodos Nr.:
- AUC-2502056
- Naujinta paskutinį kartą:
- Data 2025.02.18
- Išskirtinis pasiūlymas:
- galima tik aukcione
apžiūra
Galima apžiūra
Machineseeker iš esmės rekomenduoja apžiūrėti naudotas mašinas.
Visa duomenys pateikti pagal geriausias žinias ir sąžinę – įsitikinkite vietoje.
Šie skelbimai taip pat gali jus sudominti.
mažas skelbimas

1 153 km
Briaunų apklijavimo mašina
Holz-HerSprint 1317-2
Holz-HerSprint 1317-2
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida