Briaunų klijavimo staklės HOLZ-HER Auriga 1308 XL -naudota-

Holz-Her Auriga 1308 XL

Būklė: naudotas, Gamybos metai: 2013, Used machine Year of manufacture: 2013 Rodpfey U R Izsx Ai Teu Equipment and technical data: - Control unit with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed - Glue application system GluJet 301: 2.3 kW, automatic glue height adjustment, sensor nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left & right: with CM technology - Corner copying unit with diamond cutters - Surface scraper blade - Buffing unit - Extendable workpiece support - Motorised pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunction milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collector box - Spraying unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short notice Location: 63934 Röllbach

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 82 500 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 5 000 mm, Y ašies eiga: 3 000 mm, Z ašies eigos atstumas: 1 750 mm, X ašies padavimo greitis: 65 m/min, Y ašies padavimo greitis: 65 m/min, padavimo greitis Z ašis: 65 m/min, veleno greitis (maks.): 20 000 aps./min, greitas poslinkis X ašimi: 65 m/min, greitas poslinkis Y ašis: 65 m/min, greitasis eiga Z ašyje: 65 m/min, sukimo momentas: 63 Nm, bendras svoris: 90 000 kg, Įranga: sūkių greitis be galo kintamas, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining of the workpiece in a single setup (with a 300 mm long tool, A-axis at 90°) Machine operating hours (powered): approx. 82,500 h Total spindle hours: approx. 36,500 h Mounting table No machine table is supplied with the machine. However, we would be happy to offer a custom solution at additional cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axes: 2,000 Nm Drives linear axes Feed rate X, Y and Z-axis: up to 65 m/min Axis acceleration X, Y and Z-axis: up to 5 m/s² Rjdpfx Ajxl R Hvsi Tju Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space requirement for the machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aqua blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 touch probe - BLUM LaserControl NT mini Machine condition Fully operational, in very good condition. Can be inspected under power until April 2026.

Būklė: naujas, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration Machine- New: GLUJET GJ725 This offer is for an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control unit - ECO MODE energy-saving function - Jointing cutter unit FG201 with 2 cutter heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right rotation - Edge feeding system 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - 1912-3 pneumatic pressure unit - 1918 pneumatic end trimming unit, 60 mm - FR301 MOT6 multifunction milling unit - Diamond cutter Ø 56/60 mm, left rotation - Diamond cutter Ø 56/60 mm, right rotation - FF301 MOT1 corner copying unit - ZK301 MOT4 scraper unit incl. high-gloss package - Carbide reversible knives for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying unit for infeed and outfeed zones - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Long infeed fence 1,252 mm - Motorized adjustment for infeed fence - DW301 pressure unit with motorized NC axis - Extraction hoods for 1918 end trimming unit Rsdpfx Aeu R Sy Asi Tou - Shelf board system - FK701 surface scraper - GM301 spraying unit after pressure unit - New demonstration machine -

Būklė: naudotas, Gamybos metai: 2023, Used machine Year of manufacture: 2023 177 operating hours Equipment and technical specifications: Edge Control PPC 322 W controller with 21.5" 16:9 color touchscreen ECO MODE energy-saving function Motorized pressure beam adjustment Pull-out workpiece support 600 mm Extension for pull-out workpiece support 3-color LED light at infeed Motorized adjustment of infeed fence Long infeed fence Air cushion table BS 301 iTronic package Jointing unit FG201 with 2 milling heads, 64 mm height Edge feeding unit 1903 GluJet GJ 301 glue application system Automatic glue height adjustment (sensor nozzle) Magazine for 4 cartridges GluJet collecting container Pressing unit DW 301 with motorized NC axis Spray unit GM301 after pressing unit with lubricant for high-gloss edges Trimming unit 1918 pneumatic (60 mm) Extraction hoods for trimming unit Milling unit FR301 MOT6 Corner copying unit FF 301 MOT 1 including motorized horizontal axis adjustment Shelf program Scraper unit ZK301 MOT4 with high-gloss package Flat scraper FK701 Complete spray unit for separator and cleaning agents Buffing unit Availability: short-term Rsdpfx Aiey Rgwqs Tju Location: Flörsheim

Būklė: naujas, Gamybos metai: 2024, Laser engraving machine for home and hobby use. This tabletop device can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan CO2 laser engraver is primarily designed for intricate work on small objects. Compact, reliable, and precise—exactly what you need. Redpjh D Rvpofx Ai Tsu The Wattsan 0503 micro-engraver processes plywood, wood, plastics, rubber, leather, fabrics, and much more. It can cut materials up to 5-6 mm thick. It is often used for producing souvenirs, stamps, and other decorative items. For more information, please contact our sales representatives! Wattsan 0503 Specifications Working area: 500 x 300 mm Laser power: 60 W Worktable lowering depth: 200 mm Positioning accuracy: 0.03 mm Machine dimensions: 650 x 1040 x 575 mm Packaging dimensions: 765 x 1140 x 710 mm Weight: 104 kg Virmer not only offers premium equipment, but also service and delivery. Our engineers and support staff are ready to answer all your questions and, if necessary, can provide video assistance. In addition, owners of Wattsan machines benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. We supply not only laser engraving machines but also metal cutters, welding units, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continues to advance with the feedback of its customers. Thanks to this input, Wattsan has implemented over 50 upgrades that have made the machines more reliable, precise, and powerful—helping take your business to the next level. YOU CAN CALL OR WRITE TO US! WE WILL HELP YOU SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the right laser or CNC milling machine, we are here to assist. You will find a wide range of laser machines and accessories with us: CO2 laser machines, metal laser cutting machines, metal laser cutters, fiber metal lasers, fiber metal laser engravers, CNC milling machines for metal, woodworking mills, CNC milling machines, laser engraving machines, laser engravers, laser cutters for plywood, laser metal cutters, CNC milling machines, laser markers, lenses, coolers, machine cooling systems, S&A chillers, IPG Laser, MAX Photonics, Raycus, compressors, rotary axes, and mirrors for laser machines.

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical data: Edge thickness, coil material: 0.4 - 3 mm (material-dependent) Edge thickness, strip material: 0.4 - 8 mm (material-dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (restrictions possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - Three-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence, 1252 mm - I-Tronic package - Edge Control PPC 322 W control system - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology Rodpfxoy Nuf To Ai Tju - ECO-Mode energy-saving mode - Prepared for RETURN connection (third-party products) - Guide system BS 501; ensures right-angled feeding for edge-banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing cutter unit FG201 with 2 milling heads, 64 mm high - Edge feeding unit MG 301 - GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via metering sleeve and sensor nozzle for compensation of panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional PUR adhesive processing; the vacuum pump extracts the reaction agent (water molecules) from the PUR and thus the adhesive can remain in the system without curing. The vacuum pump operates independently of the machine’s power supply and automatically compensates any vacuum loss. - Full control over PUR! - Pressure section DW 301 with motorized NC axis; first roller driven with pneumatic immersion control, 2 conical follow-up rollers - GM301 spray application unit after pressure section for high-gloss edges (lubricant) - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Form trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Flat scraper FK702 - Complete separating and cleaning agent spray system - GM 301 spray application unit after pressure section (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery Availability: short-term Stock location: Hochheim

Būklė: naudotas, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC color touchscreen monitor iTronic adaptive pressure and glue quantity control and cleaning routine Pre-milling unit for edging before glue application Fully automatic edge magazine for rolls and strips Glue application unit GLU JET cartridge + PU bonding, with sensing nozzle Workpiece height 8–60 mm High-gloss package Pneumatic pressure unit Pneumatic end trimming unit for rolls and strips up to 8 mm edge thickness with pneumatic adjustment of 0–10° tilt of the end saws Redpfjy Icmpex Ai Tsu Multifunction milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling – bevel milling 15° via NC axes Contour milling unit – Corner rounding for edge thickness up to 3 mm, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4 for bevels and radii with 2 scraper holders via NC axes Flat scraper unit FK701 with pre- and post-sensing – finishing Buffing unit – polishing Spraying device in infeed and outfeed area Spraying device with lubricant for high-gloss edges Complete DIA tooling included Delivered first in 2020 Machine is in TOP CONDITION, coming from a leasing return – small business Available ex stock Lieboch

Būklė: geras (naudotas), Gamybos metai: 2000, CNC Surface and Profile Grinding Machine Redpfxefrbcks Ai Tsu Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electro-magnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine base tray. Complete machine documentation available.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 7 kW (9,52 AG), pjūklo disko skersmuo: 305 mm, bendras ilgis: 3 100 mm, bendras plotis: 3 100 mm, bendras svoris: 3 000 kg, pjovimo ilgis (maks.): 3 100 mm, pjovimo aukštis su įrėžėju (maks.): 70 mm, X ašies padavimo greitis: 40 m/min, padavimo greitis Z ašis: 50 m/min, vietos reikalavimas ilgis: 3 100 mm, reikalingas plotis: 3 100 mm, Įranga: dozatorius, sūkių greitis be galo kintamas, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture manufacturing, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Technical Main Data & Equipment: Longitudinal saw FM 20-3100 with hardened guides Automatic forward and return stroke of the saw unit (return stroke automatically lowered) Feed drive via three-phase geared motor, frequency inverter-controlled Feed speed: 2 – 40 m/min (infinitely variable) Return speed (rapid traverse): 50 m/min Extraction channels in machine base & pressure beam Score saw adjustable externally (without opening the hood) Protective hood interlock with lamella curtain SZ 5008 3-stage cutting height adjustment LA 4143 6 recesses in the pressure beam for offcuts up to 5 mm Saw motor: 7.0 kW | Scorer motor: 1.1 kW (can be switched off) Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: Angle pressure device WP 5003 with hold-down claw for crosscuts Adjustment range: 2400 mm Fully automatic control via DNC-AT Material infeed table HP 5091 2 top-mounted guides, rack-and-pinion guide Servo drive material pusher Feed speed: 25 m/min (safety limited) Return: 40 m/min 6 clamping fingers, 4 double roller tracks Table length: 3100 mm | Gauge depth: 3150 mm Closed Pertinax surface in the angle stop area Control & Operation: Operating system: Ubuntu Linux Integrated PC with hard drive, parallel & serial interface Network capable (LAN/WLAN), remote maintenance via Internet (TeamViewer, Remote Desktop) USB print function Multilingual dialog programming 15" flat screen, multifunction keyboard in swiveling control panel Graphical display of cutting patterns and processes Software / Programs: OPTIMAX: Office optimization, offcut calculation, material requirements OPTIMIN: Direct optimization at the machine PC with parts list entry Processing via USB, floppy disk, or online (optional) Manual, automatic, & special operating modes (e.g., grooving, veneered parts) Additional Equipment: Angle stop table HP 5085: 1,720 x 800 mm | Pertinax overlay Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay Air cushion system LK 5030 integrated in both tables Circular saw blade KSB 4005: Ø 305 mm, Z = 60 Rodpfx Aowrn Efsi Tou Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is used worldwide – even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g., Thailand): the PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and endurance. Warranty: We are so confident in the quality and durability of our machines that we offer a 7-year warranty on the machine construction and guideways. (Excludes electrical supply parts and wear parts.) 📞 Contact us for a customized quote or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, • Complies with CE standards • Corner press machine designed for 90-degree joining of aluminium profiles • Both upper presses and blade movement are pneumatically operated • mm scale system is available for adjusting blade height and advance • Automatic centering angle stop included Rjdpjrbiv Ajfx Ai Tou • Equipped with a release button for fine adjustment • Two pedals are used for actuating the pneumatic presses to clamp the profile • Polyamide plates are fitted to prevent damage to profile surfaces • Equipped with side support arms