Džiginio gręžimo staklės

HMB PBM 1000/60

Sąlyga: naudotas, Gamybos metai: 1976, Sukimo diametras virš staklių lovos: 0560 mm Sukimo diametras virš atramos: 350 mm Sukimo ilgis: 1500 mm Veleno skylė: 65 mm Veleno apsukos: 16-1250 aps./min. Išilginiai padavimai: 0,050–24,0 mm/aps. Ffodjt Tqgxspfx Ab Set Skersiniai padavimai: 0,039–18,86 mm/aps. Bendras galios poreikis: 9 kW Staklių svoris apie 4,5 t

Gamybos metai: 1996, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112 on base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW Equipped with VEM motor 90 kW 3~motor, IP55, Fodjhtnniopfx Ab Soft with pressure control valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 2300x1000x1400 mm Weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 242350148, -WT 106- Fjdpslf Evcefx Ab Sjft Offered here is a bench drill press from Flott, model TB23L. The drill press is mounted on a special lift table (not the original lift table). Technical data: - 6-step speed adjustment (manual via belt pulley) - MK2 taper

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Ffodpegf H Saefx Ab Set Control: Minipos 807, year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Process container / gross volume: max. 230 liters Usable volume: approx. 115 liters Fjdpofqpxiofx Ab Seft Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. Ffjdofg E Hpepfx Ab Sjt • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: labai geros būklės (naudotas), Vertical bandsaw JAESPA model MSU 4 Fedpfx Abod Tx D Ue Sjft Wheel diameter: 420 mm Throat depth: 400 mm Table size: 615 x 615 mm Cutting height: 350 mm Saw blade length min. 3450 – max. 3640 mm Infinitely variable saw blade speed: 20–2500 m/min Power supply: 400 Volt, 50 Hz - Infinitely variable saw blade speed through 2 motor speeds, 2 gearbox stages, and infinitely variable belt drive - Tilting saw table - 2 gearbox stages - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shears - Grinding stone for weld seam grinding Required space (L x W x H): 1100 x 950 x 2000 mm Weight approx. 700 kg Very good condition, immediately operational 2 identical machines in stock

Sąlyga: naudotas, IDC000100 Komplett Sägewerk - Valon Kone VK26M mit Ein- und Auslauftransporteuren - Rundumlaufsystem (Merry-Go-Around) - ARIVislanda KS12, 2 x 37 kW - ARI Nachschnittsäge - ARI KL10 Spanersäge - Soderhamn Eriksson 519C, Kantenhobel mit Hackachsen Ffjdpfxjvgdy Aj Ab Set - Bruks Hacker 1300 Komplett mit Steuerung und Mechanisierung.

Sąlyga: naujas, Metal band saw OPTIMUM OPTIsaw S275N - Showroom machine - Feed rate steplessly adjustable, pivoting ----- Technical Data ----- Swivel range: 0 - 60°, Cutting height: 150 mm, Cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Ffsdpou R S Hpsfx Ab Sot Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new showroom machine -

Sąlyga: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw band length: 3375 x 27 x 0.9 mm Band speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support Ffodpfxsfd Abae Ab Sjt - Automatic cooling system The illustration shows the semi-automatic version.