Automatinis juostinis pjūklas

JAESPA W 400 AZ/P-Minipos

Būklė: naudotas, Used 3D printer EOSINT M 270, low operating hours (4910) Kjdowd Ulvopfx Aaujdk

Būklė: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Kdodpfx Aasf Sqcksuek Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I Ksdpod Iipmefx Aauodk • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: labai geros būklės (naudotas), Dividing Head Walter Type UPA 125 N (28487) direct and indirect dividing center height 125 mm Kjdpotrnndofx Aausdk usable in horizontal and vertical positions spindle taper MT 4 KKG 3 traverse path SPH 125 mm mount MK 2 total transport weight 62 kg dividing head 48 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine Kdsdothd Shepfx Aausk - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Būklė: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm Kdedpfxonzpx Rj Aausk - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. Kdodpfx Aei Ezx Deauok OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Gamybos metai: 1984, būklė: naudotas, mašinos/transporto priemonės numeris: 25 948, Outreach: 485 / 1050 mm Roller diameter: 500 mm Passage height: 380 mm Table size: working table 780 x 800 mm Saw band length (over 2 wheels): 3920 - 4050 mm Max. saw band width: 20 mm Band speed: 15 - 940 m/min Drive motor: 380 V, 4 kW Required space: 950 x 2130 x 2100 mm Kdjdpfxsb N Eh Hs Aauok Weight: 1740 kg

Būklė: naujas, Universalioji frezavimo staklė Gamintojas: OPTimill Modelis: MT 50 Prekės Nr.: 3336005 Būklė: Nauja staklė Eigos: - X ašis: 580 mm - Y ašis: 200 mm - Z ašis: 340 mm Standartiškai komplektuojama su: - 3 ašių skaitmenine indikacija DPA 31 PLUS - Automatinė X ašies pastūma Ksdpfx Aajbnfxueujdk - Ilgas frezos strypas 16 mm - Ilgas frezos strypas 22 mm - Gręžtuvo griebtuvo tvirtinimas B 18 - Dantytasis gręžtuvo griebtuvas 3–16 mm/B 18 - Redukcinis įvorė MK 2 su išstūmimo grioveliu - Redukcinis įvorė MK 3 su išstūmimo grioveliu - Mašinos šviestuvas - Aušinimo sistema - Eksploataciniai įrankiai - Naudojimo instrukcija

Gamybos metai: 1979, būklė: geras (naudotas), 3-jaw chuck Multifix toolholder system Tailstock Technical data: Turning length: 1000 mm Turning diameter over bed: 520 mm Turning diameter over cross slide: 300 mm Kdodpjnqy Haefx Aausk Spindle speed range: 30-1600 rpm Machine weight approx.: 2500 kg Technical data, accessories, and machine description are not binding.