Atšaldyto vandens įrenginys, šaldymo sistema ENR 008

Hitema ENR 008

Būklė: geras (naudotas), Artikkel: A-7577 Fløtetank 10 000 L Rustfri prosessfløtetank, dobbelmantlet, isolert, skrapeomrører fra toppen, CIP-montert på toppen. 3 justerbare ben, mannlokk på toppen. Guedpsh E Dp Ajfx Af Dea Kapasitet 10 000 L. Vi kan tilby 2 stk fra lager. Diameter: 2 458 mm.

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), A Spinner simultaneous turning center with three turrets and a comprehensive range of accessories, spare parts, and tooling is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, spindle nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27,102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, 80 bar coolant/high-pressure system, chip conveyor, fire extinguishing system, an extensive tooling package, and further spare parts. Documentation available. On-site inspection possible. Guedjua E Trspfx Af Dsa

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Travel range X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Guedpfjv Uqb Njx Af Doa

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: Gedpjuxft Esfx Af Dsua -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: geras (naudotas), cilindrinės šlifavimo staklės Guedpfx Aetrgndjf Dja

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation Gsdeg Ezarspfx Af Dsua - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Būklė: naudotas, Gamybos metai: 2017, Technical details: Grinding diameter: 280/320 mm Grinding length: 750 mm Guedpfx Aettxg Ssf Doa Centre height: 170 mm Machine weight approx.: 22.5 t Space requirements approx.: 4.7 x 3.65 x 3.0 m

Gamybos metai: 2009, būklė: geras (naudotas), MAJA RVE 800 S dribsnių ledo gaminimo mašina Dribsnių ledo aparatas yra universalaus panaudojimo: - Naudojamas faršavimo metu gaminant virtas dešras - Kepinių bei tešlų gamyboje - Žuvies ir jūros gėrybių vėsinimui - Šviežių produktų vitrinų užpildymui prekybos centruose - Kulinarijos skyriuose - Dekoratyviam bufetų vėsinimui Pagaminimo metai: 2009 Ledo našumas: 800 kg/24 val. Galingumas: 400 V, 740 W Šaltnešis: R404A Skirta prijungimui prie išorinės šaldymo sistemos (nėra komplekte) Matmenys apie: 150 x 147 x A 240 cm Galima finansuoti per mūsų banką. Gusdpskx Hv Isfx Af Dea komplett-konzept.leasingo.de Daugiau naujų ir naudotų svarstyklių rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos pagal užklausą!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Siūlome įvairias naudotas 3R sistemas. Sistemos labai geros būklės ir visiškai veikiančios. Apžiūra galima susitarus. Poz. 1 Sistema 3R-203 Sukamasis WEDM elementas 360°, Poz. 2–4 Sistema 3R-201J Adapteris WEDM 90°, Poz. 5–6 Sistema 3R-202 MiniBlock, Poz. 7+8 Sistema 3R-204 Aukščio reguliavimo adapteris WEDM, Poz. 9 Sistema 3R-218/30S Laikiklių komplektas, Poz. 11 Sistema 3R-602.21 Rankinis Macro spaustukas, Poz. 12 Sistema 3R-294.3 Prispaudimo griebtuvas, Poz. 15 Sistema 3R-293.3 SuperVice, Poz. 17 Sistema 3R-200-4J-2 470 mm, 470 mm, 330 mm, 138 mm, Poz. 18 Sistema 3R-239–545 0006-V01, Sistema 3R-239–495. Galimas siuntimas ir apžiūra! Guedjxqn Ubopfx Af Dja

Gamybos metai: 2018, būklė: naudotas, Eismaschine Guedpewp R Rlsfx Af Dea Hersteller: Ice Systems (UK) Modell: F2AS Baujahr: 2018 Erzeugt Flockeneis Kapazität: Ausgelegt für 2 Tonnen pro 24 Stunden Mit Gestell, im Gehäuse Touchscreen-Bedienung