Vienos kolonos presas - hidraulinis

HIDROLIKSAN CFSS 100t

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 130 t, stalo plotis: 750 mm, stalo ilgis: 1 000 mm, perforavimo jėga: 130 t, pramušama skylė stalo paviršiuje: 220 mm, cilindro skersmuo: 55 mm, eigos reguliavimas: 140 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Ready-to-use production with PLC control + dual hand/foot control Application Areas - Cold cutting and punching operations - Cold-breaking applications - Metal die forming Gedpevtyvgjfx Ah Asub - High-volume production lines ✅ STANDARD FEATURES • Steel welded body • Four-sided guided slideway • Spheroidal graphite cast connecting rod and gear housing • Crankshaft and transfer shafts from 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directives compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain hand-finger protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor function • In compliance with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die per requested specification • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Table–slide distance: 500 mm Slide–table gap: 510 mm Distance between uprights: 450 mm Ram adjustment (shut height adj.): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchor dimension: 790 mm Side anchor dimension: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Floor to table height: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is produced by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, galia: 7,5 kW (10,20 AG), spaudimo jėga: 100 t, stalo plotis: 670 mm, stalo ilgis: 950 mm, perforavimo jėga: 100 t, pramušama skylė stalo paviršiuje: 180 mm, cilindro skersmuo: 45 mm, eigos reguliavimas: 120 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates by means of the force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is a highly efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance tailored for serial production environments. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready usability with PLC control + dual hand/foot pedal operation Typical Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-way guided slide • Spheroidal cast connecting rod and gear bushings • Crankshaft and drive shafts made of 4140 quenched & tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual solenoid safety valve • Manually adjustable stroke • Finger–hand safety protection with light curtain • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulations compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of custom dies (on request) • Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bed–ram distance: 400 mm Slide–table clearance: 465 mm Distance between side frames: 420 mm Ram adjustment (shut height adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchor span: 710 mm Side anchor span: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Gedpfx Ahovtx Ine Aoub Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please notify us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2024, Būklė: nauja Pagaminimo metai: 2024 Sandėlio numeris: 7305 Pristatymo laikas: iš karto, galimas tarpinis pardavimas Kilmės šalis: Italija Kaina: 46 400 € Lizingo įmoka: 886,24 € Sandėlyje: 1 vnt. Presavimo jėga: 100 t Eiga: 500 mm Stūmoklis: 700 x 350 mm Stalas: 800 x 600 mm Montavimo aukštis: 500 mm Iškyša: 300 mm Godpfx Ahjwiry Ie Aeub Greita eiga: 25 mm/s Darbinis greitis: 4 mm/s Variklis: 4 kW Ilgis: 1900 mm Plotis: 1200 mm Aukštis: 2600 mm Svoris: 2100 kg Dvigubi apvalūs kreiptuvai Stalas ir stūmoklis su T formos grioveliais Dviejų rankų valdymas Siemens PLC Manometras Eksploatavimo instrukcija Įsk. slėgio jungiklį

Būklė: naujas, Gamybos metai: 2026, Spaudimas 150 t Iškyša 300 mm Eiga 400 mm Įrengimo aukštis 600 mm Stalo matmenys 1000 x 600 mm Valdymo sistema: Siemens S7 Praėjimo anga stalo viduryje 0 mm Stūmoklio paviršius 1000 x 600 mm Darbinis greitis 5 - 15 mm/sek Nuleidimo greitis 130 mm/sek Pakėlimo greitis 180 mm/sek Variklio galia 18 kW Mašinos svoris apie 12,0 t Matmenys I x P x A 2,4 x 1,9 x 3,5 m Vienašonė presas su - Grūdintu ir chromuotu cilindru - Pagrindinio cilindro diametras 270 mm - Pagalbinio cilindro diametras 70 mm - Siurblys, vožtuvai ir filtras Bosch Rexroth - Hidraulinis perkrovos vožtuvas - Hidraulinis proporcinis vožtuvas - Siemens liečiamas valdymo pultas su nuotolinės priežiūros prieiga Nustatymai: eiga, slėgis, greitis ir išlaikymo laikas - Jutikliai ir šviesos užuolaida, atitinkantys 4 kategoriją Godpsyfwxtofx Ah Aoub - Dviejų rankų valdymo pultas su atstatymo ir avarinio stabdymo mygtuku - CE ženklinimas

Būklė: naujas, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Press force: 100 t Nominal press force at 4.5 mm Table length: 700 mm Table width: 1000 mm Through-hole in table: 210 mm Stroke: 1 - 132 mm Strokes per minute: 58 Ram guides: 6 Ram adjustment: 90 mm Ram hole: 60 mm Throat depth: 300 mm Installation height: 445 mm Motor: 7.5 kW Length: 1650 mm Width: 1545 mm Height: 3011 mm Weight: 7000 kg Welded steel frame construction Crankshaft made of AISI4140 (42 CrMo4), ground Bronze bearings made of SnBz-12 6-way ram guide Pneumatic clutch-brake combination 7" touchscreen Gsdpewiqq Sjfx Ah Aoub Pneumatic ram counterbalance Gear train in oil bath PLC for safety functions Working area secured by light curtain Motorized ram adjustment Mechanical overload protection Two-hand and foot pedal operation Adjustable stroke rate (inverter) Automatic central lubrication Machine and equipment according to CE regulations OPTIONS: Vibration pads €192.00 T-slot plate €2,580.00