šildymo presas rėmo presas

Hidrobrasil 160T Vulkanisierpresse

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), Downstroke press Pressing force: 300 kN Press area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heated platen as solid steel hot plate Electrically heated up to 250°C Nkodpekuz T Ujfx Agiou Control system: Siemens S7-1200 with 12" touch panel Mechanical safety door Data logging

Gamybos metai: 2004, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: UP 20_LIND, Used Motoman HP20 Type: HP20 Njdpfefd Drrjx Agisku Controller: NX100 Year of manufacture: 2004.09 Payload: 20 kg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Nedpecxxycsfx Agijku Sheet width: 120 mm Table size: 480 x 450 mm BRUDERER precision double-roller feeder: left side Adjustable stroke range: 16–40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double-roller feeder on left

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. Nedpjfxyhfofx Agieku In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naujas, Gamybos metai: 2025, volelio skersmuo: 140 mm, vėjo ilgis: 1 570 mm, - Capacity: 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital display for rear roll movement - Digital display for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor Nkedpfsgg Nv Iox Agiju - Emergency stop - Documentation - 400V

Sąlyga: geras (naudotas), Gamybos metai: 2000, bendras aukštis: 47 000 mm, bendras plotis: 27 000 mm, bendras ilgis: 25 000 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, bendras svoris: 43 000 kg, stūmoklio plokštės plotis: 600 mm, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Nkedpfjtiwgiox Agiou Light barrier by Sick Separate control cabinet by Rittal Side walkways/passages Floor-level installation

Gamybos metai: 2024, Sąlyga: naujas, Bending capacity: 6 mm Pre-bending: 5 mm Nkedpfeftdh Iox Agiju Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg by prior appointment at any time. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.

Gamybos metai: 1993, Sąlyga: naudotas, Bending length: 3,000 mm Distance between uprights: 2,750 mm Max. pressing force: 180 t Nksdpekh Niqefx Agisu Control system: CYBELEC DNC70 Throat depth: 220 mm Total power requirement: 15 kW Machine weight: 11,000 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Cryogenic gas semi-trailer for LNG (liquefied methane). Manufacturer: CRYOCAN EU approval. Year: 2011 Volume: 50.25 m³ Vacuum certificate available We also have other tankers for LIN, LOX, LAR, LNG and CO2 Argon, Oxygen, Nitrogen and Carbon Dioxide, Methane, Hydrogen Nsdpotulh Iofx Agioku

Gamybos metai: 1993, Sąlyga: naudotas, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Nkedpfoihf R Usx Agiou Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Overall Height (floor to top): 5,800 mm Distance Between Uprights (Front Opening): 3,400 mm Lateral Window Opening: 1,600 mm