Hidraulinis koloninis presas

Hidralmac 500 T Säulenpresse 2100 x 1500 mm

Press force: 500 t
Clear opening (W x D): 2100 x 1500 mm
Stroke: 1000 mm
Total power requirement: 62 kW
Machine weight approx.: 39 t
Dimensions (L x W x H): 5100 x 2800 x 4040 mm
Return force: 40 t
Main cylinders: 2 units
Column diameter (main cylinders): 360 mm
Table size: 2100 x 1500 mm with T-slot
Ram size: 2100 x 1500 mm
Table height above floor approx.: 850 mm
Approach speed: 300 mm/sec
Return speed: 300 mm/sec (with 20T ram weight)
Pressing speed: 200T = 28 mm/sec
Oil tank: approx. 1000 l
Auxiliary cylinders: 2 units
Column diameter (aux. cylinders): 120 mm
Total table plate size: approx. 2750 x 1600 mm
Total ram plate size: approx. 2750 x 1600 mm
Pressing speed: 300T = 20 mm/sec
Pressing speed: 500T = 6 mm/sec
Ram return force: 40 t
Control chain voltage: 24 V
Voltage: 400 V
Frequency: 50 Hz
Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min
Installation height (distance platen to ram): 1500 mm
Hydraulic block: REXROTH
Pressure regulation: via PLC (minimum pressure 50T)
Cylinders: 4 x ø90 x 70 mm
Stroke length: 300 mm, adjustable via PLC
Ejector forward speed: 95 mm/sec
Ejector return speed: 240 mm/sec
Capacity: 4 x 15T at 250 bar
Pressure setting: via monitor from 50–500T
Pressure holding time: 0–900 sec
Hydraulic tank: 2000 l
Control system: Siemens S7-300
Storage capacity: 200 programs
Electronics from German manufacturers: SIEMENS/MÖLLER
Control console: on pivoting arm
Photocells Sick: 1500 mm on front side

Control operation:

The linear encoder transmits the positions of the ram and ejectors to the control system. Travel path, upper stop, switching point (where the press transitions from fast approach to working speed), and target end positions can all be quickly and easily set via the monitor control system.
Working speed can be adjusted in 1 mm/sec increments from 0 to 10, and in 10 mm increments from 10 to 300 mm/sec.
Additionally, the machine features pressure monitoring which, upon reaching set pressure, either returns the ram to the top position or holds pressure for a set duration (maintaining within 5% tolerance) and then opens.
The control monitors the protected areas, complete hydraulics, pumps, and temperature. It also synchronizes the main cylinders and compensates automatically in case of uneven loading.
The control is housed in a separate control cabinet. The operation of the press itself is conducted via a control console mounted on a pivot arm, reducing the operator's walking distance.

Additional equipment:

- 8 mm polycarbonate glass on rear door interior
- 8 mm polycarbonate glass on side doors and work area
- Fluid channel, 25 mm radius, on front, rear, and sides of the table

Special features:

- Including 10% reserve (max. capacity 550 t)
- Steel quality: Stainless steel LCG ASTM A36, manufactured according to DIN 8651
- Motor and pump automatically shut off when the tool is closed and automatically compensate for 5% pressure loss (significant cost savings)

Kdedpfx Afodyynvj Isg
Nitrogen compression system:

Scope of delivery includes a nitrogen compression system, capable of generating an instantaneous pressure of 280 bar, which can be switched on and off as needed.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.