Matavimo sistema

Hexagon Primescan

Gamybos metai: 1965, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Mounting in the pull bridge: Ø 105 mm cylindrical Through-hole in clamping table: Ø 125 mm Clamping surface / workpiece area: 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool feeder’s tool tray) Cutting speed: hydraulically, steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding work area) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Ijdjtuuvzjpfx Aggotn Features: • Mechanical-hydraulic control for broach and return stroke • Integrated coolant and cutting fluid system • Manual tool feed • Broaching carriage with pull head mounting guided flat on both sides • Adjustable pulling force limiter • Pulling force indicator Accessories: • 1 universal pull head for flat shanks up to approx. 40 mm width • Indexing device (see photos) • Various special adapters and clamping devices • Machine documentation Remarks: The machine is suitable for producing keyways using flat broaching tools as well as profile broaching. Thanks to the machine bed and the robust broaching tool feeder, the machine is ideally suited for heavy-duty profile broaching tools. The machine is used and in good condition for its age. The machine is available for inspection at our warehouse. The machine has newly arrived in our stock and has not yet been overhauled, neither technically nor cosmetically. Pull heads for profile broaching are available on request, depending on DIN standard, dimension, and subject to stock.

Būklė: naudotas, Gamybos metai: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally delivered for the following workpiece sizes: diameter 26 mm - 29 mm, length 65 mm - 66 mm. By changing parts in the clamping device, handling units, etc., diameters up to approx. Ø50 mm could likely be processed. Iodpfjlqac Sox Aggjtn A total length of just under 400 mm should be possible with some modifications. This is also dependent on tool lengths, processing lengths on the component, etc.

Gamybos metai: 2021, būklė: beveik kaip naujas (naudotas), Mobile 3D coordinate measuring device Ijdpsmrrb Sofx Aggjtn Keyence WM-3000 As-new condition, being sold due to upgrade Technical specifications available from the manufacturer Inspection possible in 47877 Willich

Būklė: naudotas, mašinos/transporto priemonės numeris: 109369/109370, Technical Data Manufacturer: ZEISS Serial No.: 109369/109370 The plate is split in the middle Measuring Plate Length = 6000 mm Width = 3000 mm Height = 350 mm The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We would be happy to provide you with a detailed quotation! Note: Our offer is intended exclusively for professional customers! (Subject to alterations, errors in technical data, specifications, and prices, as well as prior sale!) Iodpodbi Nljfx Aggstn

Būklė: naujas, TECHNICAL SPECIFICATIONS: Stainless materials such as V2A 304ss or V4A 316ss can be used, depending on the preferred surface treatment. The side walls of the tank are insulated with 50 mm glass wool. Tanks that require heating can be equipped with either a coil heater or electric heating. Temperature control is digital, with monitoring included. If needed, an air mixing unit can be integrated into the tanks. For draining purposes, stainless steel ball valves are used. OPERATING PRINCIPLE: The system operates on the principle of surface cleaning and treatment by placing the material to be cleaned into baskets, which are then immersed by crane into tanks containing chemicals and/or water for a specified period. The aim is to remove any existing oil film from the metal surface and to create a thin film layer, thereby making the material more receptive to painting and more resistant to external influences. AREAS OF APPLICATION AND ADVANTAGES: The automotive sector, domestic appliance sector, lighting sector, and general mechanical engineering are among the fields suited for this system. It is ideal where continuous production is not required, or where high and consistent quality must be achieved with reduced labor input – particularly in facilities where no alternative solutions are available due to the form and size of the material, or where very high capacities are not feasible. Chemical and temperature values can be monitored and regulated via optional automation. APPLICATION: Surface cleaning applications of the immersion type vary according to each sector’s preferences and required specifications. The two main application types are: - Iron phosphate surface treatment Itsdpfefw N Rtjx Aggon - Zinc phosphate surface treatment In addition, the system can be used for pure cleaning and degreasing applications. Optional equipment for the immersion tank includes: * a drying oven * 2 stainless steel baskets DRYING OVEN: In general, the operating principle of drying ovens, which form the final step of immersion-type surface cleaning units, is similar to that of box ovens. However, to be compatible with immersion-type surface cleaning systems, the oven’s lid sections are arranged at the top, and the surface-cleaned parts are dried in the same basket. In this drying system, parts are loaded into the drying oven after the cleaning process and are ready for coating once dry.

Būklė: naudotas, Gamybos metai: 1996, Workpiece diameter: 240 mm Isdpfx Aet Hwvmoggstn Centre distance: 0 mm Maximum honing length: 500 mm Maximum module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Required floor space approx.: [missing] R E I S H A U E R (Switzerland) CNC-Controlled Gear Honing Machine Model: RZR, Year: 1996 # 74 105 _____ Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece slide stroke (Z-axis): 275 mm Honing tool traverse stroke (X-axis): 128 mm X-axis infeed: 0.001 mm/stroke Crowning approx.: 0.5° Workpiece clamping length approx.: 500 mm Max. workpiece oscillation approx.: 3,000 mm Honing tool external/internal diameter x width: 325/308 x 45 mm Honing tool rotational speed: 100 - 1,200 rpm Honing tool dressing speed: 30 - 1,000 rpm Spindle drive: 4 kW Total drive approx.: 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special equipment: - SIEMENS CNC path control type 810 G allows input of all relevant gear data and dialog-based workpiece setup with the controller. With DNC interface RS 232 for data input and output. - A-axis = swiveling/helix adjustment, Z-axis = table movement, X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment. - Equipped with attached automatic device for threading the honing wheel into the tooth gap. - The tool swivel angle (A-axis) is also electrically positioned, fast and precise, and hydraulically clamped, resulting in reduced set-up times. - Hydraulic workpiece clamping via footswitch between the workpiece spindle headstock and tailstock, both units movable on the workpiece table depending on the workpiece. - Complete working area enclosure with sliding doors and safety interlock. - Extensive original REISHAUER honing oil processing system type RTO 40.10, with centrifuge and cooling unit for constant honing oil temperature, oil mist filter, etc. - Various diamond dressing tools mounted on arbors. - Separate ventilated and cooled electrical/control cabinet, separate hydraulic unit.

Gamybos metai: 1972, būklė: naudotas, This machine is available 3 times. Specifications: Manufacturer: Landis Model: FRM 50 E-8 Year of manufacture: 1972 Iedpeg Umitjfx Aggstn Tailstock stroke: approx. 100mm Distance between spindles (retracted position): approx. 550mm Maximum workpiece diameter: 75mm Travel per unit: 200mm Drive powers: 8.5kW / 750 rpm 12kW / 1450 rpm 18kW / 2960 rpm Note: The machine is set up for ø20mm and 65mm length Accessories: with magazine

Būklė: naudotas, Gamybos metai: 2016, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, „Heller FMS“ su 2 x „H2000“ Staklių gamintojas / tipas: HELLER H2000 Veikimo valandos: 59 654 Pagaminimo metai: 2016 Valdymo sistema: Siemens 840D SL Velenas: PC63, 10 000 aps./min., 38 kW, 242 Nm Įrankių tvirtinimo sistema: SK40 Įrankių laikiklis / vietos: grandininis įrankių laikiklis / 160 vietų Patogi valdymo panelė, pagrindinio laiko metu atliekamas įrankių keitimas Pasukamas stalas: 360 000° X 0,001° Aušinimo skysčio sistema: Knoll KF 400/50 bar Darbinis plotas XYZ (mm): 630 / 630 / 630 Padėklų dydis (mm): 500 X 400 Gaminio tvirtinimas: mechaniškai Papildomos parinktys, ypatybės: grąžto lūžio kontrolė (SBBK); sąsaja su FMS, infraraudonųjų spindulių imtuvo matavimo daviklis (Renishaw), sąsaja su dulkių surinkimo sistema; aušinimo skysčio aušintuvas Staklių gamintojas / tipas: HELLER H2000 Veikimo valandos: 60 546 Pagaminimo metai: 2016 Valdymo sistema: Siemens 840D SL Velenas: SC63, 16 000 aps./min., 40 kW, 96 Nm Įrankių tvirtinimo sistema: SK40 Įrankių laikiklis / vietos: grandininis įrankių laikiklis / 240 vietų Patogi valdymo panelė, pagrindinio laiko metu atliekamas įrankių keitimas Pasukamas stalas: 360 000° X 0,001° Aušinimo skysčio sistema: Knoll KF 400/50 bar Itjdpfxjwbt Rre Aggen Darbinis plotas XYZ (mm): 630 / 630 / 630 Padėklų dydis (mm): 500 X 400 Gaminio tvirtinimas: mechaniškai Papildomos parinktys, ypatybės: grąžto lūžio kontrolė (SBBK); sąsaja su FMS, infraraudonųjų spindulių imtuvo matavimo daviklis (Renishaw), sąsaja su dulkių surinkimo sistema; aušinimo skysčio aušintuvas Staklių gamintojas / tipas: FASTEMS FPC750 su papildomu konteineriu Veikimo valandos: skaitiklis neįdiegtas Pagaminimo metai: 2016 Valdymo sistema: FASTEMS Atminties vietos: 24 atminties vietos, 2 įrankių keitimo vietos Gaminio tvirtinimas: mechaniškai Papildomos parinktys, ypatybės: 20 padėklų Papildoma informacija ir techniniai duomenys teikiami užklausus.

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBHF-4BR125, DEMAG KBK Overhead Crane System, Crane Runway approx. 33x6.5 m + 4 Cranes Load capacity / lifting capacity: 4 x 125 kg - 0.125 t The crane system can also be divided in length (halved). Technical specifications: Crane runway made from Demag KBK2/KBK2T rails The system is delivered complete: KBK rails, rail connectors, trolleys, end stops, cable festoon, power supply, hangers/suspension brackets, etc. Includes 4 bridge cranes with 125 kg chain hoists: 3x Demag DC-COM + 1x Stahl The crane is dismantled and available immediately. Itsdpem Tvviefx Aggen Very good used condition, see pictures. Location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are kept in stock! Other KBK systems also available. Load capacities from 125 kg to 1,600 kg. Please inquire with your required crane runway, cantilever capacity, and dimensions.

Būklė: naujas, Gamybos metai: 2025, If you are looking for a genuine type plate laser machine and not a toy, then you are in the right place: (*Price details depend on configuration and laser power; this is a brand new laser system from our own manufacturing) Laser Marker skyLaser Mark – 20W 2D Software, optional 3D Fiber Laser Engraving/Marking Laser is the complete solution for your complex laser processing requirements – Nameplate Laser Machine Attention: Compare the installed components in the laser systems offered: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, cables – all components are exclusively sourced from German manufacturers! The laser systems are 100% custom-built in our Plauen factory according to your specifications. Competitors often use Chinese components (it starts with the controller – EZCAD = Chinese origin!) (*The stated price may vary depending on the equipment; the images show different equipment variants; you will receive a brand new laser machine made in-house) Ideal solution for: - Product identification - Laser marking - Laser engraving - Laser cleaning - Laser removal Our skyLaser Mark nameplate laser systems are used exactly where conventional CO2 laser technology reaches its limits. With the fiber laser at a wavelength of 1064nm, even the finest structures can be reproduced on almost any material. The main advantages in your application are geometric flexibility and high processing accuracy. This processing method can be used regardless of the hardness of the workpiece material. The customizable, mobile workstation increases the system’s flexibility; you can effortlessly integrate the system into your production line or use it as a stand-alone solution. Our skyLaser Mark delivers highly precise and permanent markings (laser engravings) and is particularly suited for specialized nameplate laser applications on metal and certain organic materials. A wide range of font types can be used, and it's easy to apply barcodes, serial numbers, logos, and images. Thanks to excellent resolution, almost any marking requirement can be met. Production of embossing stamps, engravings, markings, and complex, fine details – the software is extremely user-friendly. Even highly complex and intricate marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in seconds thanks to an optional observation camera for process monitoring and software-assisted workpiece alignment. Since the system has virtually no wear parts and is nearly maintenance-free due to the IPG laser technology, it is ideal for industrial and continuous operation. The skyLaser marking/engraving laser at a glance: Itsdpfx Aedgfgcoggon - Working area: from 110x110 mm, 120x120 mm, or 300x300 mm (F-Theta lenses depending / 3D option) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB galvanometer scanner - Nominal laser power: 20W