Gręžimo staklės

HERMLE UWF 801 Paket Aktion

Sąlyga: geras (naudotas), BYSTRONIC HYDRAULIC PRESS BRAKE 3100X150 TON, MAX STROKE 315 mm, FAST DOWN STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST UP STROKE 150 mm/s, OVERALL DIMENSIONS: 415X200X290 cm (h), WEIGHT 11,000 KG Y1 Y2: axes of the hydraulic cylinders. X axis: front-rear movement of the backgauge. R axis: up-down movement of the backgauge. Z1 and Z2: axes for left-right movement of the stops. X1 or relative X axis: movement of a single stop (front-rear). Isdsvxipgopfx Af Iotb 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Itedpou Nc Emsfx Af Ijb Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting

Sąlyga: geras (naudotas), Dimensions: Width 2000 mm, Depth 2000 mm, Height 1600 mm Table: 620 mm x 390 mm Machine weight: approx. 1500 kg Isdpfx Aeu A Iuyef Ijtb Control: Dialog 4 Equipment: backlash-free ball screws, hydraulic SK40 tool holder, electronic handwheel

Sąlyga: labai geros būklės (naudotas), Control: D.Electron Z 32 Centre height: 220 mm Iteded Sitkopfx Af Iob Centre distance: 1000 mm Swing over bed: 440 mm Swing over cross slide: 245 mm Z-axis travel: 750 mm Bed width: 320 mm Spindle mount: CL 6" Spindle bore: 62 mm Spindle speeds: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Quill travel (manual): 200 mm Quill diameter: 80 mm Quill taper: MT 4

Sąlyga: geras (naudotas), Gamybos metai: 1985, mašinos/transporto priemonės numeris: 1076-85, Offer 24303 Technical Data: - Table size approx. 630 x 340 mm - Travel range of the axes - X (longitudinal) approx. 400 mm - Y (cross) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance spindle–table surface: 400 mm - Tool holder: SK 40 - Spindle speeds adjustable in 16 steps: 45 – 2240 rpm - Power feeds X / Y / Z axis: 6.3 – 1250 mm/min - Drive: 400 V / 8.5 kW - Required space approx.: W 1450 x H 1900 x D 1450 mm - Weight approx.: 1600 kg - Equipped with: - 3-axis digital readout HEIDENHAIN - Swivelling vertical milling head Itodpjt Dxwgofx Af Isb - Horizontal spindle counter-support - Machine vice

Sąlyga: naujas, Gamybos metai: 2024, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 450 mm, - Simple graphical programming, including GoTo function in manual mode - Working lengths from 3000 to 16,500 mm, depending on configuration - Free programming in DIN/ISO (G-codes) - 2-axis interpolation for X/Y axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min, Y-axis = 25 m/min Main spindle BT 40 - 5-fold bearing support, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads: drilling and milling - Maximum tool length: 290 mm - Maximum tool diameter: 88 mm X-axis guidance - 2 pieces of 45 mm linear guides, each with 2 ball-type carriages X-axis drive - Helical precision rack and pinion, travel path 3,000 to 16,500 mm Y-axis guidance - 2 pieces of 35 mm linear guides, each with 2 ball-type carriages Y-axis drive - Ball screw spindle, diameter 25 mm, travel path 600 mm Z-axis guidance - 2 pieces of 35 mm linear guides, each with 2 ball-type carriages Z-axis drive - Ball screw spindle, diameter 32 mm, travel path 450 mm Isdpfxorb Afao Af Ijtb Standard configuration Automatic tool changer with 10 positions, mounted in the machine column

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Drives for linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - Three-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. Machine still connected to power and immediately available. Itodpfxow Rl S Se Af Ieb

Sąlyga: geras (naudotas), Gamybos metai: 2001, Dear Sir or Madam, We hereby offer you a used 5-axis CNC machining center “DECKEL MAHO” DMU 50 eVo, in good condition. Itodpfx Afow Axahs Iob

Sąlyga: labai geros būklės (naudotas), Sandblasting machine De Laurentiis model 100 TS year 2002 Ijdpjrxr Rgefx Af Ietb

Sąlyga: naudotas, Gamybos metai: 1988, Grundig valdymas x eiga 700 mm Iedsiqu S Eepfx Af Ijtb y eiga 500 mm z eiga 400 mm Staklių svoris apie 2,8 t +++++ Atkreipkite dėmesį, kad įrenginys yra išmontuotas ir paruoštas pakrovimui. Dėl šios priežasties negalima atlikti demonstracijos su prijungta elektra ar nufilmuoti vaizdo įrašo. Be to, mūsų skelbime yra pačios informatyviausios ir geriausios kokybės nuotraukos. Papildomų nuotraukų atsiųsti negalime. +++++