Universalioji bandymo mašina / Tempimo bandymo mašina

Hegewald & Peschke Inspekt Table Blur 5

Universal Testing Machine Inspekt Table Blue 5kN

Mechanical Structure:

- 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm
- 1 test area up to nominal load:
- Test area width: 420 mm
- Max. test stroke without test tools, adapters, and KMZ: 1025 mm

Travel Speeds:

- Test speed: 0.0015 - 1000 mm/min at full load
- Return speed: 1000 mm/min

Force Measurement:

- Measurement range: 0.8 - 100% of nominal load, Class 1 (optionally Class 0.5)
(±1% of the displayed value according to DIN EN ISO 7500-1)
- Resolution of force measurement: ±180,000 digits at 20 ms integration time

The machine is delivered with a factory test certificate. If a factory or DKD calibration at the installation site is required at the customer's request, this service must be billed separately.

Crosshead Travel Measurement:

- Incremental square input with encoder monitoring, storage of crosshead position
- Measurement resolution: 1 µm

Dimensions (WxDxH) / Weight:

- Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – Controller mounted on load frame

Standard Features:

- Force, displacement, and strain control
- Overload protection, automatic force calibration
- Specimen break detector, return function
- Set-up mode via control panel with display (force, travel)

Data Processing:

- USB 2.0 interface or LAN
- Data transfer rate to PC: 50 Hz (standard); higher data acquisition rates available with special software module
- Internal data processing rate: 2 ms
- Optional: Up to 2 available expansion slots for plug-in modules (1-channel analog cards or 2-channel digital cards) for additional sensors


115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% RH.
Required options for operation: load cell, grips, PC (current standard, operating system 8-10-11, test software)


Load Cell 5000N
- Measurement range: 5–5000N tension and compression, with nominal 2mV/V output signal, overload protection ±100%, linearity ±0.05%, hysteresis ±0.03%, repeatability ±0.02%, including 1.5m connection cable and calibration certificate.

Supplied with extensometer MFX 200

The MFX 200-B extensometer, thanks to its robust construction and high measuring accuracy, is suitable for almost all specimens with a starting gauge length from 10 mm. All elongations, from the modulus of elasticity to specimen break, can be recorded. It can be freely used in both the upper and lower test area. In combination with the MFQ-A, r- and n-value determination for thin sheets is also possible. Two different measurement systems are available, differing in measuring signal and some technical specifications (see technical documentation).
Pgsdpfx Adeyyu I Nezjl

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.