Platus juostinis šlifuoklis

HEESEMANN HSM .2 Compact

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) Lhjdpfxsrmucxo Af Iob - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Gamybos metai: 2023, Sąlyga: naujas, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Application: Packaging, bundling, and protecting long or bulky products such as furniture, doors, wooden panels, etc. Operator Side: - Right side in the direction of product flow General Technical Data: - Main motor power: 1.5 kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear holders that press from above during cutting to secure the product Lsdpfjfuwg Isx Af Ishb - Photo sensor for automatic start of wrapping process - Touch-screen for adjusting machine parameters to product requirements - Operator safety systems Optional Equipment: - Various conveyor configurations - Infeed and outfeed roller conveyors - Air bubble film wrapping unit Technical Specifications: Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Conveyor Belt Features: - Usable length: 1924 mm - Total length: 2000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m / sec - Load capacity: 100 kg/m Stretch Film Specifications: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Sąlyga: naudotas, Gamybos metai: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400 V, Dyn5-11-1, IP23 or IP00, forced ventilation AF, Al/Al windings, temperature monitoring unit, fully functional, very good condition, 2 units available Lhodpfx Ajquwtxsf Ieb

Sąlyga: geras (naudotas), Drying oven for UV line Ledpfx Ajt Ag Uqof Iohb

Gamybos metai: 2023, Sąlyga: naujas, Fully automatic orbital stretch wrapper SPINNER 1500s Application: Packaging, grouping, and protection of long or bulky items such as furniture, doors, wood panels, etc. Operator side: - right in the direction of product flow General technical data: - Main motor power: 2.2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,200 kg Standard equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with a mechanical brake system - Automatic stretch, clamping, and cutting system - Pneumatically operated top pressure units at front and rear, which press down on the product during the cutting process to hold it in place - Photoelectric sensor for automatic start of the wrapping cycle - Touchscreen panel for adjusting machine parameters to specific product requirements - Pre-programmed selection for recurrent product dimensions - Operator safety systems - Infeed and outfeed rollers Technical features: Wrapping dimensions according to diagram: - Max. length: unlimited - Min. dimensions (WxHxL): 100 x 18 x 550 mm Lsdjfuwmuepfx Af Iehb Conveyor belt features: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Loading capacity: 150 kg/m Stretch film properties: - Max. film width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns

Sąlyga: labai geros būklės (naudotas), Apatinės ašies frezavimo staklės Panhans 240A Veleno skersmuo: 30 mm Veleno ilgis: 130 mm Kintamas veleno greitis: 3000/4500/6000/9000 aps./min Lhodexg Iz Hjpfx Af Ijb Elektroninis veleno aukščio reguliavimas Elektroninis liniuotės reguliavimas Elektroninis kampo reguliavimas SCM keturių volelių padavimo įtaisas

Sąlyga: geras (naudotas), Gamybos metai: 1999, Briketavimo presas GP 120 Tandem tipas. Presas skirtas pjuvenoms, drožlėms ir dulkėms briketuoti, su automatiniu lygio jutikliu. - Briketo diametras: 60 mm - Presavimo našumas: 40 - 120 kg/h * 2 = 80 - 240 kg/h (priklausomai nuo medžiagos) - Piltuvo atidarymo dydis: apie 1.900 x 1.900 mm - Piltuvo aukštis: apie 1.800 mm - Piltuvo talpa: apie 6,0 m³ - Variklio galia: 7,5 kW, 400 V, 50 Hz - Valdymo spinta: iš abiejų pusių - Darbo valandos: 13.725 val. arba 13.005 val. - Hidraulinis agregatas: apie 300 l hidraulinio aliejaus bakas - Svoris: apie 1.100 kg * 2 = 2.200 kg Naudotas briketavimo presas, geros būklės. Lsdpfx Afsupwx Ho Ijhb W-znyplių cilindras, replės (RB 120 sustiprintos), replės jungties flanšas viena kryptimi pakeistas (kairėje, transportavimo kryptimi) briketavimas | briketavimo presas | briketavimo presai | briketų presas | briketavimas

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Lodpfx Aehlp Efef Ijhb

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Lsdpfoxnldbox Af Iohb Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Gamybos metai: 1990, Sąlyga: geras (naudotas), Used sideloader Kalmar, the machine has been well maintained Ledjh Et E Nepfx Af Iohb For more details, see pictures