Briaunų apklijavimo mašina

HEBROCK AKV 3003 DK-F

Sąlyga: labai geros būklės (naudotas), Hebrock 3003 Edge Bander Well-equipped, available for inspection before purchase Predpfxowmc I Do Afwod Pre-milling cutters Zero-joint AirTronic hot air system (glue-free) Glue application with roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids Precision end-trimming saw Top/bottom milling unit, R1–R2 pneumatically adjustable Corner rounding unit, pneumatically adjustable Flat scraper Max. workpiece height: 50 mm Max. edge thickness (in roll): 3 mm Feed speed: 10 m/min Power supply required: 15.8 kW Condition: very good, fully operational

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit Pedpfoxfh Tmsx Afwjrd - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Naudota mašina GM020.0068 AKV 3003 DK - F Pagaminimo metai: 2007 Vykdymas: 3 mm 1-oji frezavimo stotis: Kombinuota Paviršiaus grandiklis su išėmimu Važiuoklė Pneumatinis frezavimo reguliavimas Psdpjw Nih Ijfx Afwjrd Ribinio jungiklio svirtis, 7,5° nuolydis

Sąlyga: naujas, Tipas: 1000-2S Darbinis plotis: 1000 mm Minimali darbinio ruošinio ilgis: 400 mm Darbinis storis: 2–80 mm Šlifavimo volo greitis – dažnio valdymas Padavimo greitis: 5–20 m/min Bendra variklių galia: 4,12 kW Transportavimo matmenys: 1700 × 1600 × 1400 mm Svoris: 800 kg Kaina: 4130 Eur (EXW Jonava, Lietuva) Pjdpfx Asm Dr Rnefwjrd

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min. Prsdpfx Afjhymgdjwod Weight: approx. 900 kg Max. total connected load: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min. Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combi milling unit Radius milling R=2 mm Corner radius milling R=2 mm Radius scraper R=2 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Kaeser screw compressors – various models Prjdpfx Afoqcu Rcjwsd

Sąlyga: naujas, Gamybos metai: 2025, Heating output / Nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue outlet: rear (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Filling opening dimensions (L x W): 300 x 340 mm Weight: 375 kg Prsdpfx Afjhvibzswjd Efficiency: 88.2% Energy efficiency class: A+ The EWI-A 15G room heaters are type-approved according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the limits of the 1st BImSchV (Federal Emission Control Ordinance).

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Prjdpfxevvkfdo Afwod Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Sąlyga: naudotas, Gamybos metai: 2002, Mašinos ilgis: 6240 mm Svoris: 2400 kg Prisijungimo galia: 14 kW Ištraukimo skersmuo: 120 / 140 mm Sandėliavimo vieta: Nattheimas Pjdpfx Afjvvkfwewsrd

Gamybos metai: 2022, Sąlyga: naujas, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, tilt function, outrigger table, angle-mitre fence, automatic brake, can be lowered below table level ----- Technical Data ----- Prjdpfsihahmex Afwed Tilt range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Max. cutting height: 87 mm, Max. saw blade diameter: 315 mm, Mitre fence swivel range: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction ports diameter: each 1 x 100 / 50 mm, Weight: 450 kg Large extraction hood Location: Ex stock 54634 Bitburg - Immediately available - Location: Ex stock 54634 Bitburg - Free loaded - - Immediately available -