Vamzdžių gręžimo mašina

HEBÖ RBV 12

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GL-0313-4995, bendras plotis: 1 800 mm, bendras ilgis: 3 900 mm, bendras aukštis: 1 500 mm, įvesties srovės tipas: trifazis, Įranga: sūkių greitis be galo kintamas, Siūlome hebö RBV 12 praeinamą gręžimo stalą, puikios būklės, 2013 gamybos metų. Įrenginys visiškai veikiantis, mažai naudotas, beveik kaip naujas. Puikiai tinka turėklų gamybai. Hjdpfeygczisx Af Usl Jei turite klausimų arba reikia daugiau informacijos, prašome mums parašyti arba paskambinti telefonu.

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° Hsdpfx Afelgvkie Usl - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Būklė: naudotas, Gamybos metai: 2008, Techniniai duomenys: Gręžimo galia pliene (skersmuo): 40 mm Išmetimas: 350 mm Gręžimo eiga: 120 mm Gręžimo galia ketaus: 60 mm Veleno tvirtinimas: MK 4 Veleno išmetimas: 350 mm Veleno apsukos: 50–1450 / 18 žingsnių aps./min Padavimas: automatinis / rankinis mm/aps. Maks. atstumas tarp veleno ir stalo: 25–705 mm Stalo tvirtinimo paviršius: 430 x 430 mm Gręžimo stalo reguliavimas: 680 mm Hodpoviqybsfx Af Usl Kolonos skersmuo: 150 mm Atstumas nuo veleno centro iki pagrindo plokštės: 1210 mm Bendras galios poreikis: 1,6 kW Mašinos svoris apie: 350 kg Mašinos matmenys apie (I x P x A): 0,95 x 0,55 x 2,3 m Stalas reguliuojamas aukštyje (pasukamas ir palenkiamas) Stalas pasukamas 45° į kairę/dešinę ir 360° aplink koloną Sriegiavimas iki M24 Aušinimo skysčio sistema

Būklė: naujas, Gamybos metai: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned along the X-axis at the desired spot, clamped, and drilled. All you need to do is press the start button. The horizontal gripper of the positioning system allows easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or recalling a previously saved program, the machine operates completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages: • A series of holes can be drilled automatically at precise intervals. • Possible operator errors are drastically reduced. • Programming takes only a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower required. Fully automatic design Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vice (clamping width 200 mm) Minimal-quantity spray unit with holder and spray nozzle Hsdofu Itbspfx Af Uol Drilling machine: Unimax 3T AV (see technical data sheet for specifications) Rotation lock Motorised height adjustment Tapping unit NC positioning system PD 200p Feed force 200 kg Positioning by absolute or incremental dimensions possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile as dirt protection Infeed and outfeed roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Support plates / Bracing / Roller diameter 50 mm / Steel rollers We look forward to your enquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM Hedpfx Ajfu Ivzjf Usl You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 310 kg, Svoris: 310 kg Matmenys: 900x700x1550(h) mm Variklio galia: 3 kW Kietas kvadratas: 20x20 mm Hodpfxox I Rdie Af Usl Kietas apvalus: 20 mm skersmuo Turėklas: 60x12 mm

Būklė: naujas, Gamybos metai: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - NC control system - includes bending pin - includes tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely variable stroke adjustment Hsdpfx Afeqvm Uke Uol - Adjustable working speed Max. working stroke: 10 mm/sec Return stroke: 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table - Weight: 1,000 kg - Bending capacity: Flat material: 150 x 22 mm Round tube: up to 60 mm

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180x100 mm Working height: 925 mm Saw blade speed: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirements: approx. 1.9 x 1.45 x 2.1 m SPECIAL PROMOTIONAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20192) · Miter cutting left 60° / right 45° · Hydro-pneumatic control of saw unit · Electro-pneumatic material feed unit · Smooth-running, high-torque worm drive with large g ear reduction, integrated into a rigid cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, also with lateral quick adjustment for miter angle changes · Precision prismatic guide for the drive head, adjustable on the side · Especially robust machine base with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. Hsdpfod Iin Hsx Af Uol · Adjustable water cooling · Adjustable cutting pressure NOTE: Price does not include saw blade! (Saw blade price: €204)

Būklė: labai geros būklės (naudotas), Motorized 3x3 welding column with movement control via pendant station. Hsdpfx Aeu Afttjf Usl Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch, flux hopper, and Lincoln NA-3N amperage and voltage control panel. Submerged arc duty cycle: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 V Input current: 193/96.5 A Input frequency: 60 Hz Input phase: 3 Input power: 230/460/3/60 Mode icon: CC/CV Output range: 150–1300A DC, 16–46V Polarity: DC Rated output: 1000A / 44V / 100%

Būklė: naujas, Digital technology, the NEOPULSE 400 CW is a three-phase, pulsed MIG/MAG welder designed for heavy industry. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Its intuitive and functional digital interface allows for easy adjustment of welding parameters. Hodpfemxkggox Af Usl MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored (flux-cored) wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes (up to Ø 6 mm). DC TIG CONTACT / PULSED. Gouging (up to Ø 6.5 mm).