LPG krautuvai

HC Hangcha CPYD35–XW22F

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, veikimo valandos: 1 815 h, keliamoji galia: 3 500 kg, kėlimo aukštis: 4 500 mm, laisvas kėlimas: 1 410 mm, stiebo tipas: triplex, statybinis aukštis: 2 240 mm, šakių laikiklio plotis: 1 100 mm, šakių ilgis: 1 500 mm, tuščias svoris: 4 995 kg, pavaros tipas: Treibgas, statybos plotis: 1 235 mm, LPG Forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 8.15-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: 60 - 80% Description: Half-cab with PVC side panels, lighting similar to road traffic regulations, 3rd + 4th hydraulic valve up to the fork carriage, rotating beacon, manual levers, interior mirror Sideshift, fork positioner, ATIB fork positioner with sideshift, opening range: inside edge - inside edge 145-850 mm 3rd hydraulic valve, 4th hydraulic valve, rear work lights, front work lights, half-cab, interior mirror, rotating beacon, windshield wiper, LED, seat, Bljdpfxst Dd Azs Admor

Gamybos metai: 2023, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, New Astronergy 420W TopCon Photovoltaic Panels, maximum efficiency, 12-year product warranty and 30-year performance warranty (87% output after 30 years). Available: 20 pallets of 36 panels each: - 17 pallets (36 panels per pallet) at the San Pietro Mosezzo warehouse (Novara) Bljdpfoupvxxjx Admor - 3 pallets at the Nereto warehouse (Teramo)

Sąlyga: naudotas, Gamybos metai: 2020, veikimo valandos: 1 203 h, keliamoji galia: 3 500 kg, kėlimo aukštis: 4 500 mm, laisvas kėlimas: 1 410 mm, stiebo tipas: triplex, statybinis aukštis: 2 240 mm, šakių laikiklio plotis: 1 100 mm, šakių ilgis: 1 500 mm, tuščias svoris: 4 995 kg, pavaros tipas: Treibgas, statybos plotis: 1 245 mm, LPG forklift Load centre: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Bjdpfxot Dd Abe Admjlr Condition: Ready for use and fully functional Technical condition: Very good Front tyre type: Super elastic Front tyre size: 8.15-15 Front tyre condition: 40 - 60% Rear tyre type: Super elastic Rear tyre size: 6.50-10 Rear tyre condition: 60 - 80% Description: Semi-cab with PVC side panels, lighting similar to StVO (German Road Traffic Regulations), 3rd & 4th valve up to fork carriage, rear working light, beacon, hand levers Sideshift, fork positioner, Fork positioner with sideshift, opening range: inside fork - inside fork 145 - 860 mm 3rd valve, 4th valve, rear working light, front working light, semi-cab, interior mirror, beacon, windshield wiper, LED, seat,

Gamybos metai: 2008, veikimo valandos: 40 000 h, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2008 (00191), Verkauft durch Bollegraaf Recycling Solutions, dem Originalhersteller dieser Bollegraaf Ballenpresse und Förderband: Bollegraaf HBC140s Ballenpresse (2x75kW). Ballenpresse: Gewicht: 47.100 kg Baujahr: 2008 Nur mit Hardox-Bodenblech ausgestattet Variable Kanal-Druckregelung Kunststoffventil Hydraulikpumpe über Frequenzumrichter angetrieben Nagetiere-abweisende Verkabelung Tiefenfiltration des Hydrauliköls Modem Betriebsstunden: 40.000 Diese Ballenpresse kann auch vollständig nach den 'Bollegraaf OEM Certified Refurbishment Standards' generalüberholt verkauft werden. Dies beinhaltet 2 Jahre Garantie. Kontaktieren Sie uns für weitere Informationen oder ein Angebot. Allgemeine Prinzipien der Generalüberholung: Bljdpfxskcgf Ho Admor Reinigung & Demontage Vor Beginn der Überholung wird die Ballenpresse in unserer Werkstatt vollständig gereinigt und zerlegt. Toleranzen Nach der Demontage werden die Toleranzen aller Stahlkomponenten gemessen und wo nötig nachgeschweißt. Dies gilt mindestens für folgende Komponenten: • Pressstempel (Ram) • Rahmen • Kanal • Vorpressklappe Nach Demontage und Inspektion wird der Pressstempel nachgeschweißt und mit neuen Stempelrädern ausgestattet. Die Schutzgitter und die Vorpressklappe werden ausgedellt und falls erforderlich instandgesetzt. Neulackierung Nach der Toleranzmessung und eventuellen Reparatur- und Schweißarbeiten werden alle Komponenten gestrahlt und neu beschichtet. Hydraulik: Der Hydrauliktank wird gereinigt. Alle Hydraulikleitungen und -schläuche werden ersetzt. Die hydraulischen Komponenten werden neu abgedichtet. Das Hydrauliköl wird ersetzt. Verkabelung: Alle Kabel werden überprüft und ggf. ersetzt. Alle Verteilerdosen werden erneuert und an gut zugänglichen Stellen montiert. Verschleißteile: Alle Verschleißteile werden ersetzt. Die Bolzen und Wellen der Zylinder sowie des Kanals werden erneuert. Alle Verschleißteile der Nadelinstallationen und Knoter werden ersetzt. Zylinder: Die Zylinder werden neu abgedichtet und – falls notwendig – mit einer neuen Chromschicht oder Kolbenstange versehen. MCC-Schaltschrank: Der Schaltschrank wird überprüft und gereinigt. Elektronische Bauteile werden falls erforderlich erneuert. Die SPS und das HMI (Bedienpanel) werden durch die neueste Schneider M340 Version inkl. neuester Software ersetzt.

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel Bedpfx Adsu Thypjmolr - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Bedpfx Aovwlqqjdmjlr Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Gamybos metai: 2003, veikimo valandos: 43 000 h, Sąlyga: reikia remonto (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en -transportband: Bollegraaf HBC140s Balenpers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Uitsluitend Hardox bodemplaat Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze balenpers kan ook volledig gereviseerd worden verkocht, conform de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene uitgangspunten revisie Reiniging & demontage Voor de daadwerkelijke revisie wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Aandrijfram, • Frame, • Kanaal, • Voorpersklep Na demontage en inspectie wordt de ram opnieuw opgelast en voorzien van nieuwe ramwielen. Bsdekcgynopfx Admelr De beschermroosters en de voorpersklep worden uitgedeukt en waar nodig gerepareerd. Overschilderd Na het meten van de toleranties en het uitvoeren van eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen & slangen worden vervangen. De hydraulische componenten worden opnieuw afgedicht. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle lasdozen worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van de beide naaldeninstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw afgedicht en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, lenkimo jėga (didž.): 1 000 t, eigos ilgis: 200 mm, darbinis greitis: 50 mm/s, atbulinės eigos greitis: 180 mm/s, bendras svoris: 8 000 kg, bendras ilgis: 3 915 mm, bendras plotis: 1 605 mm, bendras aukštis: 2 655 mm, įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, garantijos trukmė: 24 mėnesiai, Lenkimo kampas (maks.): 90 °, stalo ilgis: 3 200 mm, darbinio aukščio: 450 mm, Visiškai elektrinė servo lankstymo staklės Blsdpfx Asv Hchledmor Nominali jėga (KN): 1000 Slankiklio eiga (mm): 200 Kaklelio gylis (mm): 360 X ašies eiga (mm): 600 R ašies eiga (mm): 200 Z ašies eiga (mm): 2500 🔹 Išmani CNC valdymo sistema – SL100-P su aukšto lygio algoritmais ir 12 colių lietimui jautriu ekranu patogiam valdymui. 🔹 Aukšto tikslumo konstrukcija – baigtinių elementų analizė (FEA), atkaitinimas ir vienkartinis apdirbimas ilgalaikiam stabilumui bei tikslumui užtikrinti. 🔹 4 ašių išmanus grįžtinis atmušėjas – AC servo variklių pavara, didelės spartos pozicionavimas su automatiniu susidūrimų vengimu. 🔹 Preciziška kompensavimo sistema – reguliuojamos išgaubtos juostos ir tikslaus reguliavimo mechanizmas optimaliai lankstymo kokybei. 🔹 Galinga ir patvari pavara – didelio sukimo momento servo variklis, stiprūs rutuliniai varžtai ir sandari apsauga ilgam tarnavimo laikui. 🔹 Pilnai uždaro ciklo valdymas – Y1/Y2 ašių magnetinių matuoklių grįžtamasis ryšys, pozicionavimo tikslumas ±5μm. 🔹 Optimizuota elektros sistema – uždaras elektros skydas, efektyvus šilumos išsklaidymas ir tvarkingas laidų išdėstymas remonto ir patikimumo užtikrinimui. 🔹 Importuoti preciziški komponentai – rutuliniai varžtai ir tiesiniai kreiptuvai užtikrina tikslumą be eigos kompensavimo. 🔹 Aukšta precizika, stabilumas ir išmanioji automatizacija – profesionaliai lakštinio metalo lankstymui!

Sąlyga: geras (naudotas), Gamybos metai: 2003, Gera būklė, funkciniai paviršiai, matavimo svirtis. Rankoje laikomos dalys nepridedamos. Techninė informacija matoma nuotraukose. Blodpfjwybg Ssx Admor

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W230-028, spaudimo jėga: 80 t, garantijos trukmė: 24 mėnesiai, slėgis: 250 juosta, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45 kW) with vertical tying. This baler has already been completely overhauled in our refurbishment workshop. Bjdpjtvat Tofx Admelr The refurbishment is carried out according to the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including 2 years warranty. This press is supplied with the following options: * Mounting frames * Intermediate hopper * Bale outlet * Wire spool platforms