Šakinis krautuvas

Hanselifter E1534FH

Būklė: naudotas, Gamybos metai: 2010, kėlimo aukštis: 3 420 mm, laisvas kėlimas: 1 100 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, šakių ilgis: 1 150 mm, Svoris be apkrovos: 1175 kg Didžiausia kėlimo talpa: 1500 kg Aukštis: 170 cm Krovinių skyriaus matmenys: 193 x 17 x 17 cm CE žymėjimas: yra Bendras būklė: vidutinė Techninė būklė: vidutinė Išorinė būklė: vidutinė Norėdami gauti daugiau informacijos, kreipkitės į Christianą Theißeną. Gamintojas: Hanselifter Modelis: E1534FH Pagaminimo metai: 2010 Produkto tipas: naudotas Duomenys: Maksimalus kėlimo aukštis: 3,42 m Maksimali kėlimo apkrova: 1500 kg Šakių ilgis: 1,15 m Variklio tipas: akumuliatorinis Svoris: 1175 kg Bendri matmenys (be šakių): ilgis x plotis 1,93 x 1,70 m Aukštis: 1,70 m Bwodpfxjv Tipce An Hsu Ypatybės: baltos padangos, mažas aukštis (1,70 m), operatoriaus platforma, laisvas kėlimas: 1,10 m, integruotas įkroviklis.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines Bedpfx Anjuiy Hrj Hewu - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naujas, Load capacity 500 kg. Number of suction pads: 6 units Suction pad diameter: 215 mm Suction performance: 8.0 m³/h Crane lifting eye: 80.0 mm Voltage: 400 V Total power consumption: 0.18 kW Machine weight approx. 120 kg Space requirement approx. 2400 x 1100 x 584 mm Equipment: - For horizontal transport of smooth, dry, and airtight panels - Robust load-bearing structure made of steel Bjdpfx Anoxak Dde Hjwu - Painted in RAL 2000 with low dead weight - Galvanised longitudinal beam, length: 2,400 mm - 3x galvanised crossbeams, each 1,000 mm long - 6x spring-loaded, articulated, and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, high-quality dry-running rotary vane vacuum pump - Suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Extendable operating handle to 1,000 mm from centre of beam - Stable metal pocket for your crane control unit - Operation "Suction/Release" via manual slide valve - Control and safety device for vacuum lifter * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release function - Fine dust filter for vacuum pump protection - Documentation * Special accessories included: - 6x ball valves for individually disabling suction pads * Allows handling of smaller panel formats * Without the need to move suction pads or beams - Small spiral connection cable * Extension length 3,500 mm, designed as * Extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Max. profile length for 3-sided machining: 7,600 mm, Y-axis: 845 mm, Z-axis: 620 mm, max. traverse speed X-axis: 63 m/min, max. traverse speed Y-axis: 60 m/min, max. traverse speed Z-axis: 60 m/min, swivel range A-axis: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bars, HSK-63F tool holder set, five collet chucks, eight collets, 2-layer length processing with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for order/operation input and documentation. Regularly serviced, on-site inspection possible. Bwsdszbb Rropfx An Hsu

Būklė: naudotas, Scrubber-dryer, floor cleaning machine, sweeper - Sold as is, as inspected - Machine is without battery, brush, and squeegee - Working width: 500 mm - Battery charger included Bwodpfec R S E Ssx An Hsu - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg

Būklė: naudotas, Gamybos metai: 2002, kuro tipas: dujos, Darbo valandos: 3184 h Bodewx R T Ejpfx An Howu Keliamoji galia: 8 t Mašinos svoris apie 13 400 kg Hyster S180XL su „Quattro“ stiebu (dujinė) Kėlimo aukštis: 8600 mm / Bendras aukštis: 3200 mm / Laisvas aukštis: 2150 mm Pagrindinė keliamoji galia: 8 t – apkrovos centras 900 mm Quattro stiebas = 7 000 kg – apkrovos centras 600 mm Liekaninė keliamoji galia: 4 000 kg prie maksimalaus kėlimo aukščio!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, bendras svoris: 1 550 kg, pjovimo greitis: 2 800 000 mm/min, 2007 m. pagamintas diskinis metalo pjūklas. Šio "FomIndustrie Blitz Alva 450/500 ABC" pjūklo geležtės skersmuo yra 450 mm, todėl juo galima tiksliai pjauti įstrižai. Šio pjūklo įrankio sukimosi greitis 2800 aps/min, jis skirtas greitam įvairių medžiagų pjovimui. Tvirta konstrukcija užtikrina stabilumą ir ilgaamžiškumą, todėl idealiai tinka darbui sunkioje pramoninėje aplinkoje. Apsvarstykite galimybę įsigyti šį "FomIndustrie Blitz Alva 450/500 ABC" diskinį metalo pjūklą. Susisiekite su mumis dėl išsamesnės informacijos. • Geležtės skersmuo: 450 mm • Geležtės anga: 32 mm • Galimybė pjauti: dvigubai įstrižai (į kairę ir į dešinę) Bwedjyhfm Dspfx An Hou • Konstrukcija: tvirta konstrukcija, užtikrinanti didelį stabilumą ir tikslius rezultatus • Būklė (kaip nurodė savininkas): nedaug darbo valandų; reguliariai prižiūrimas; puikios būklės • Taikymas: tinka dirbtuvėms, surinkimo linijoms ir sunkioms pramoninėms sąlygoms

Būklė: labai geros būklės (naudotas), Load capacity approx.: 2 t Fork length: 770 mm Fork spacing: 105 mm Fork width (outside): 400 mm Overall length: 1100 mm Bedpfxed D U Uae An Hewu

Gamybos metai: 2003, būklė: naudotas, 4 ašių apdirbimo centras su 8 padėčių įrankių keitikliu, skirtas aliuminio arba PVC profiliams Bedouwq S Djpfx An Hswu Didž. apdirbimo ilgis: 6 400 mm Y ašies eiga: 850 mm Z ašies eiga: 650 mm A ašies posūkio kampas: 0° - 180° maks. Sūkiai: 21 000 aps./min Windows operacinė sistema Minimalus kiekis purškimo Spaustuvų fiksavimas ir automatinis perkėlimas Drožlių konvejeris lovyje Drožlių ištraukimas Švytuoklės veikimas su dviem šviesos užtvarų zonomis Pakrovimas įskaičiuotas į kainą Svoris: apie 4 500 kg Labai gera būklė

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1400040685, Special features: - Retrofit to WIN10 – NEW – with 6-month warranty on PC and UPS - WATER-COOLED spindle 9.5 kW S1 - 3-layer machining possible - Thoroughly cleaned and overhauled – EXCELLENT condition Description: - Graphical user interface and graphical service support - A-axis for stepless machining from above – swiveling angle 180° Bodpfjy Ah Tkjx An Hjwu - HSC milling spindle for speeds up to 24,000 rpm - Large machining width - Standard with clamp detection and automatic clamp positioning - 8 tool stations - Complete profile machining with stationary profile bar - Rapid basic positioning of the machining unit (up to 64 m/min) in the X axis - Robust and low-wear direct drive - Protective hood - Digital axis controllers for all 4 axes with high-resolution measuring system - 4-axis industrial PC control - 2 1/2 D interpolation - 15" TFT color display - Network connection RJ45 10/100 Mbit - Hard disk - Full PC keyboard - Remote maintenance via TCP/IP (requirement: internet access) Technical data: - Max. machining length without end machining: 7,600 mm - Max. machining length with end machining: 7,500 mm (tool-dependent) - Travel distance X axis: 7,700 mm - Travel speed X axis: 65 m/min - Travel distance Y axis: 850 mm - Travel speed Y axis: 60 m/min - Travel distance Z axis: 650 mm - Travel speed Z axis: 60 m/min - Swivel angle A axis freely programmable in increments of 0.1°: 0 - 180° - Positioning accuracy: - X axis: +/- 0.1 mm / 1 m - Y axis: +/- 0.1 mm - Z axis: +/- 0.1 mm - A axis: +/- 0.1° - Max. spindle speed: 24,000 rpm - Max. spindle power: 9.5 kW S1 - Tool holder: HSK F 63 - Max. milling cutter diameter: 80 mm - Max. disc cutter diameter: 200 mm - Compressed air connection: > 7 bar - Voltage: 400 V, 3 phase, 50 Hz - Fuse protection: 35 A - 8 tool stations Included accessories: - Tool setting gauge - 8 pneumatic material clamps - Automatic clamp detection - Dosing spray device - Protective hood - Front light barrier - Left and right protective fence - Central chip extraction - 2 pneumatic material stops - 3-circuit clamping system - Length measurement for profile bar - Barcode scanner with wireless transmission - Special version with light barrier Additional options available upon request: - Programming software (office) eluCad, including 6-month hotline contract - 3D import license for a machine of category "L" - Data import package license for a machine of category "L" - CSV import license for a machine of category "L" - Macros hashing license for a machine of category "L" Other information: The machine will be handed over ready for transport, including transport locks and loading onto a truck. Additionally, we can optionally offer the following services upon request: - Installation and commissioning - Machine instruction - 4/5-axis instruction package for machine and eluCad