Metalinis juostinis pjūklas MBS-ARG260Plus

Hans Schreiner MBS-ARG260Plus

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed are essential. The model is equipped with a swivel arm ranging from 0-60°, and the saw guides are based on carbide inserts. The frame construction ensures precise and quiet operation. Machine Features This horizontal metal band saw with a swiveling arm enables cutting on a plane perpendicular to the axis of the material as well as at any angle from 0 to 60°. The workpiece can be manually fed or handled by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide pads and bearings, significantly improving blade guidance, service life, straightness, accuracy, and cut quality. Carbide guidance greatly reduces wear on both the machine and the saw blade. The machine features an efficient coolant pump with a closed-circuit coolant system. The arm of the saw is made from a single cast iron piece, and together with the 27 mm-wide cutting blade, allows for full serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and is fitted with a quick-release clamp. The blade guides are outfitted with hard metal — carbide inserts — and a rolling bearing system. These CARBIDE INSERT GUIDES are responsible for the precision and straightness of the cut. The cast iron work table, fixed to the base, comes with a swivel arm and a separate control panel. During the cutting process, the primary cutting movement is the movement of the cutting blade, while the arm descends as the feed stroke. The descending speed of the arm (cutting speed) is regulated using a hydraulic cylinder. Feed speed is adjusted on the saw’s control panel. You can select between two blade speeds: 37.5 or 75 m/min. Once the arm reaches its lowest position (after cutting the workpiece), the saw blade drive switches off automatically. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened. Additional protection includes automatic shut-off of the saw if the blade breaks. The machine is powered by a worm gear motor. The motor with a thermal fuse protects against overheating during operation. Technical Data: TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter / Dimensions in mm): ANGLE ROUND RECTANGLE SQUARE 0° ø220 260 x 140 200 x 200 45° R ø160 160 x 140 160 x 160 60° R ø100 120 x 100 100 x 100 Price does not apply to machines purchased in Poland. Nodpfoudi Unox Aa Docw

Būklė: naujas, 1 brand new semi-automatic horizontal band saw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm Ncedjvyidmspfx Aa Dew +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Equipment / Special Features: • Semi-automatic operation • Hydraulic vice, actuated via foot pedal • Double mitre cuts via pivoting saw frame o The workpiece remains stationary! o No need to turn the material for mitre cuts! o High efficiency and significant time savings! • Fixed precision stops at 0°, 45°, and 60° to the left, and 45° to the right • Replaceable work table • Hydraulic vice, laterally adjustable to the left and right • Adjustable length stop (500 mm) for repeat cuts of identical length • The lowering of the saw arm is continuously variable by hydraulic system; after cutting, the arm raises automatically and the vice opens • Coolant system • Swarf brush • Swiveling control panel • Electrical safety switch for blade tension and blade guard • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Būklė: naujas, Cutting diameter: 185 mm Saw band dimensions: 2,085 x 20 x 0.90 mm Table height: 920 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Total power requirement: 0.8 kW Nedpsvn Uzajfx Aa Decw Machine weight: approx. 200 kg Berg & Schmid - Metal Band Saw GBS 185 Eco AutoCut Extremely fast and smooth cutting through improved drive technology - Mitre cuts up to 60° to the left - Suitable for dry and wet cutting - Coolant system - Machine base

Būklė: naujas, Gamybos metai: 2026, Optimum Gear-Driven Metal Band Saw OPTIsaw SD 200V For demanding sawing tasks Article number: 3300205 DESCRIPTION - Quiet operation - Sturdy cast iron construction - Saw bow lowering infinitely adjustable via hydraulic cylinder with throttle valve - Microswitch for automatic end-of-cut shut-off - Clearly readable scale for angle adjustment - Supplied as standard with a high-quality bi-metal saw blade - Saw blade tension adjustable from the front via handwheel - Ball-bearing guided saw blade - Robust machine base with large wheels and ergonomic transport handle for easy relocation - Adjustable material stop for series production - Safety switch for saw blade cover - Fully equipped, allowing the operator to start productive work immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1382 mm Width without material stop approx.: 434 mm Ncedpfx Aaov Sg T Nj Dsw Width/depth (product) approx.: 533 mm Width with material stop approx.: 533 mm Height (product) approx.: 1200 mm Height lower end position approx.: 790 mm Height upper end position approx.: 1200 mm Weight (net) approx.: 130 kg Work table height: 530 mm Electrical Data Drive motor power: 0.75 kW Supply voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 100 W Machine Data Saw blade speed(s): 26 – 80 m/min Saw blade length: 2360 mm Saw blade width: 19 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 45° Feed: infinitely adjustable Raising of saw bow: manual Cutting Ranges Cutting capacity 0° round (solid material): 180 mm Cutting capacity 0° square (solid material): 180 mm Cutting capacity 0° rectangular upright (solid material): 180 x 240 / 50 x 300 mm Cutting capacity +45° round (solid material): 110 mm Cutting capacity +45° square (solid material): 150 mm Cutting capacity +45° rectangular upright (solid material): 110 x 170 mm SCOPE OF DELIVERY - Material stop - Bi-metal saw blade - Machine base

Būklė: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Table height: 910 mm Cutting capacity at 90° flat: 245 x 150 mm Cutting capacity at 90° square: 200 x 200 mm Cutting capacity at 45° round: 160 mm Cutting capacity at 45° square: 160 x 160 mm Cutting capacity at 60° round: 100 mm Cutting capacity at 60° square: 100 x 100 mm Speed range: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight: approx. 200 kg Required space: approx. 1430 x 720 x 1700 mm Equipment: - For cutting profiles, pipes, and solid materials made of iron and non-ferrous metals - Saw bow can be swiveled up to 60° for mitre cuts - Infinitely adjustable lowering via hydraulic downfeed cylinder - Torsion-free, heavy-duty saw arm made of cast iron - 2 saw band speeds for optimal cutting results (400 V) - Robust construction ensures smooth and vibration-free operation Ncsdpfx Aoxaa Tboa Djw - Automatic end stop after cutting through the material - Sturdy cast iron vice with quick-locking feature - Ball-bearing guided saw band with quick adjustment for adaptation to workpiece width, ensuring optimal results Scope of delivery: - Saw band - Workpiece stop - Base frame - Pressure gauge for band tension - Vice with quick-locking - Coolant system - Hydraulic downfeed cylinder - Motor protection switch - Automatic end stop

Būklė: naujas, PILOUS double mitre bandsaw ARG 235 plus Including special accessories: Powered chip brush, blade tension indicator Cutting capacity: Ncsdpfxeilqh Ej Aa Djw Round: 90° -45° +45° +60° in mm: 235-165-185-115 Square: 90°-45°+45° +60° in mm: 230-145-160-80 Rectangular: 90°-45°+45° +60° in mm: 280 x 180-185 x 80-185 x 100-115 x 80 Main motor: 400 V, 50 Hz, 1.4 kW Coolant pump motor: 400 V, 50 Hz, 0.05 kW Blade speed: 40/80 m/min Saw blade dimensions: 2710 x 27 x 0.9 mm Working height at the vise: 900 mm Coolant tank capacity: approx. 15 l Machine dimensions (min): 1640 x 750 x 1400 mm Machine dimensions (max): 1930 x 1610 x 2000 mm Machine weight: 295 kg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 1,1 kW (1,50 AG), įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, bendras aukštis: 1 700 mm, bendras ilgis: 1 400 mm, bendras plotis: 685 mm, bendras svoris: 200 kg, Apvalaus plieno pjovimo diapazonas ties 45°: 145 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 225 mm, Kvadratinio plieno pjovimo diapazonas 45° kampu: 150 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 190 mm, juostinio pjūklo ilgas: 2 480 mm, pjūklo juostos plotis: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Nsdpfxjga Tzqs Aa Djcw Saw speed --- 45 - 90 M/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDES * Adjustable material vise * Angle graduation up to 60° * Automatic cut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure adjustment * CE emergency stop * Coolant pump * Base cabinet * Quick-release vise * M42 Bi-metal saw band

Būklė: naujas, Pressure: 200 t Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- - Robust construction - CNC axes Y1, Y2, X, and R axis - CNC crowning system, motorized and CNC controlled Ncedpfx Aetvhxmea Dew - CNC control unit: Original DELEM DA-58T touchscreen, 15 inch - Back gauge with linear guide and ball screw drive, with 4 stop fingers - 2 sheet support arms - Laser safety device on the upper beam - Quick-clamping system for top tool - Top tool system: Promecam Amada, divided and gooseneck - Multi-V die system, compatible with both Promecam and Amada systems - CE safety equipment

Būklė: beveik kaip naujas (parodų įrenginys), Exhibition machine - The best-selling bandsaw model in this category. This model is generally used in metalworking shops, machine workshops, and for assembly operations. Simple mitre adjustment in the range of 90° to 60° to the right. The bandsaw can be equipped with two types of drive systems. High cutting precision and blade service life are ensured by three-sided carbide blade guides housed in guide blocks and a robust bearing arrangement for all rotating components. The bandsaw is equipped with a 1730 x 13 x 0.65 mm saw blade. Supplied with base frame and coolant system. The coolant system is housed within the base frame. Technical data: Motor output up to: 0.55 kW, 230V Band wheel diameter: 180 mm Saw blade dimensions: 1730 x 13 x 0.65 mm Mitre range: up to 45° left, and 60° right Cutting capacity at 90° up to: 180 mm x 100 mm Ø 130 mm Cutting capacity at 45° up to: 115 mm x 75 mm Ø 115 mm Cutting speed: 75 m/min Nodpfx Aajvrvuij Docw Weight: 103 kg Sample photo Subject to price changes, errors, typographical and printing mistakes excepted.

Būklė: naujas, Gamybos metai: 2024, Hydraulic Press Brake PBO-3212-CNC Delem DA-58T Technical Specifications - Nominal pressure: 1250 kN - Maximum bending length: 3200 mm - Throat depth (distance between tool and rear frame): 320 mm - Maximum stroke of the bending beam: 120 mm - Maximum opening height: 390 mm - Distance between uprights: 2600 mm - Maximum backgauge travel: 600 mm - Motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Equipment - Front sheet supports: 2 pcs - Backgauge positioning (X-axis): Servo drive - Ram positioning (Y-axis): Servo drive - Backgauge finger height adjustment (R-axis): Manual - Punch clamping system: AMADA-type quick-release Delem DA-58T Control - Advanced operator support based on algorithms - Advanced graphical simulation of bending processes - Operator guidance - Algorithms to reduce production times - Automatic crowning Manual Crowning (optional*) This parameter allows the customer to always ensure a consistent bending angle across the entire length of the sheet. Automatic Crowning (optional*) Enables the control system to monitor and automatically adjust the crowning, guaranteeing optimal settings at all times. OCS The Oil Cooling System ensures stable machine parameters even during prolonged continuous operation. Professional Support We maintain constant contact with our customers. Therefore, upon purchasing a machine, we offer an hourly package for expert support by Otinus technicians. Nedjgi Dkyspfx Aa Djcw Come and Test Our Machines Attend an exclusive demonstration, where a qualified Otinus technician will showcase the full functionality of the machine. You are welcome to provide your own technical drawings and sample materials. Included with the machine: A two-day operator training and commissioning - Day 1 (up to 8 hours) – Commissioning and control system training. - Day 2 (up to 8 hours) – Independent operation under the supervision of our technician, including programming of specific components. Telephone support by a specialist - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months. Free rental of transport rollers and two hydraulic jacks to facilitate positioning of the machine at the customer's site. Rollers and jacks are provided upon prior request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty period. - Delivery time: approx. 6-8 weeks. Not applicable if the machine is marked as available from stock. - The machine is brand new - Seller's warranty and after-sales service - The customer is responsible for the machine during unloading and on-site transportation.