Apdirbimo centras

Hamuel Reichenbacher Vision II Sprint

Sąlyga: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups Bodsd Rg Dpspfx Abfolc No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, nice veneer saw with planer unit cutting length 3100 mm Bledpfxoq Rb Ire Abfoc with rear stop

Sąlyga: naudotas, Number of milling spindles: 2 units Fence: 1 unit Tooling: yes Cross Bar Milling Machine STEGHERR, Type KSF-mini ----- Including fence ruler with scale and adjustable stop. Tools included. Specialized milling machine for the efficient production of cross bar joints. The cross bar milling machine KSF-mini incorporates STEGHERR’s extensive experience in the construction of these specialized machines for cross bar joints. With the KSF-mini, all cross bar joints commonly needed in practice can be manufactured quickly and with a precise fit. Even pre-profiled muntins can be machined on the KSF-mini. Precision milling is achieved as the workpiece is clamped and machined on three sides in a single setup. Tool drive is provided via two three-phase motors; pneumatic clamping for the workpieces. The profile cutter is configured to match the rail width. The saw blades, used to trim the joint, can be adjusted to the profile cutter dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V 50 Hz Pneumatic pressure: 6 bar Included: Bedpfx Abswi Upfsfslc ----- Table frame Foot switch Tooling as depicted: 1 profile cutter 3 saw blades (corresponds to a rail width of 10 mm) Fence ruler with scale and adjustable stop as shown in the pictures. Dimensions (LxWxH): approx. 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data according to manufacturer, subject to confirmation!)

Sąlyga: geras (naudotas), Gamybos metai: 2003, Head processing of posts, boards, and battens for tear-free machining. Bsdpfxogmt Ere Abfjlc With a magazine that processes automatically. Two milling spindles move independently from the outside toward the center to prevent any tear-out.

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups OPTIONAL: No. 2 external roller conveyors (floor-mounted) for loading stacks of panels onto the loading station No. 1 external motorized roller conveyor (for receiving panels from the loading station) Separate electrical control cabinet Electronic control system Perimeter safety fence with safety mats Total connected load: 17.7 kW Bsdeflc T Sopfx Abfslc Operating capacity (cycles / min): approx. 16-20 Panel thickness (min/max) mm: approx. 10-50 Min. panel dimensions mm: approx. 250 x 320 Max. panel dimensions mm: approx. 1200 x 3000

Sąlyga: naujas, Gamybos metai: 2026, Kampinio laikiklio ir alyvuogių gręžimo staklės tiksliam ir produktyviam langų elementų gręžimui. Trumpas pristatymas: • Jokio perstatymo tarp kampinio laikiklio ir alyvuogių gręžimų Blsdpodx R Hzofx Abfsc • Gręžimo iš apačios pranašumai • Priedų komplektas kampinio laikiklio gręžimui • Gręžinių schema pagal gamintoją (pvz.: G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... ir kiti gamintojai) • Priedų komplektas alyvuogių gręžimui • Tvirtas precizinis gręžimo reduktorius iš GANNOMAT

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Werksüberarbeitungsnummer: WÜA20101490328170, pjovimo ilgis (maks.): 3 800 mm, pjovimo plotis ties tiesiniu vedliu: 1 300 mm, pjūklo disko skersmuo: 450 mm, stalo ilgis: 840 mm, galia: 6,5 kW (8,84 AG), Įranga: dozatorius, Naudota mašina GM010.0256 Pagaminimo metai: 2020 F45 ElmoDrive Mašinos aukštis 910 mm Valdymas akių lygyje Abipusis pasvirimas (+/- 46°) Didžiausias pjūklo disko skersmuo 450 mm 6,5 kW (8,8 AG) variklis 3 ašių priešpjovimo agregatas, abipusis pasvirimas Stalviršio prailginimas 840 mm Dvigubas vežimėlis, vežimėlio ilgis 3800 mm Bljdpfxjw Imvms Abfjc Įjungimo / išjungimo jungiklis ant dvigubo vežimėlio Kampinis ir įstrižas atmušėjas CNC paralelinis atmušėjas 1300 mm Lazerinis pjovimo siūlės indikatorius Purškimo įranga

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Double table machining center Working area X: 2,590 mm Working area Y: 2,260 mm Working area Z: 400 mm Number of milling spindles: 2 Spindle with liquid cooling Main motor: 19.2 kW Max spindle speed: 24,000 rpm Aggregate heads 4th axis: C-Axis Tool clamping system: HSK-F63 Central tool changer magazine: 24 positions Tool changer on each head: 12 positions Vertical drilling heads: 20 (per head) Horizontal drilling bits X: 8 Horizontal drilling bits Y: 8 Bsdpjuqw E Nefx Abfolc Grooving saw in X and Y directions 2 tables Number of vacuum pumps: 4, each 360 m³/h T-Jet chip blowing system Nesting Manual labeling Barcode reader Tool length measurement Software: BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight: 17,900 kg

Sąlyga: naudotas, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Serial No.: 124984 Year of manufacture: 2017 Load capacity: 300 kg Platform size: 1250 x 800 mm Usable lift: max. 785 mm Closed height (table lowered): 345 mm Raised height (table raised): 1130 mm Motor power: 0.8 kW Electrical connection: 400 Volt, 50 Hz - Foot switch for up and down operation, with emergency stop and key switch for controller activation - Single scissor mechanism with one lift cylinder - All-round safety contact strip with limit switches underneath the top frame - Adjustable limit switch for upper lift limitation - Table surface fitted with sturdy wooden worktop and airliner rails with lashing eyes - Hydraulic unit with tank mounted underneath the table - Feet located at table corners, movable with pallet truck Net weight: 250 kg Bledpfx Abjixq Hnofsc Very good condition, almost as new

Sąlyga: naujas, Gamybos metai: 2026, Kampinių guolių ir alyvuogių gręžimo staklės, skirtos tiksliam ir racionaliam langų elementų gręžimui. Trumpas pristatymas: • Kampinių guolių gręžimo priedų rinkinys Blodpfxedx R Hcj Abfsc • Gręžimo schema pagal gamintoją (pvz., G-U, Roto, Maco, Siegenia Aubi, Winkhaus ir kiti gamintojai) • Alyvuogių gręžimo priedų rinkinys • Tvirtas preciziškas gręžimo pavara iš GANNOMAT