Pirminis smulkintuvas

Hammel VB 750 D

Sąlyga: naujas, Gamybos metai: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 – incl. 1 set of shafts NEW – Arjes Impaktor 250 EVO 2 with one set of shafts Discharge height: 3,450 mm Belt width: 800 mm Hopper capacity: 2.25 m³ Itodpewnpwzsfx Af Iob Shaft length: 1,500 mm Weight: 14,500 kg Standard configuration engine: Volvo-Penta, Stage V / 129 kW Hook lift Tracked undercarriage Overband magnet with discharge container Water spray system to reduce dust dispersion Remote control 1 set of shafts of your choice, Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tyres, waste, plastics) Concrete shafts (demolition debris, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Wind sifter - Finger screen, disc screen - and more…

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras svoris: 44 000 kg, rotoriaus ilgis: 2 800 mm, galia: 315 kW (428,28 AG), sukimosi greitis (maks.): 87 aps./min, - MERAK 2800-2 with 315 kW - 116PR cutting system - PG190 screen (can be customized upon customer request) - Feed hopper - Dust suppression - Central electric lubrication system Ijdpfxeugf Dws Af Ijtb - Hydraulic safety protection - Overband Neodymium Magnet Separator – HP - Rubber-coated, bolted track plates on crawler undercarriage

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2006, galia: 320 kW (435,08 AG), Stationary shredding plant LINDNER Jupiter 3200. Iedpjwg Ev Dofx Af Istb Electric drive: 2x 160 kW Including hydraulic unit, control cabinet. Drive belts new.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, 2 x 125 tonų portali krautuvai, kėlimo aukštis 30 metrų, pagaminimo metai 2013. Isdpfxogmdnfs Af Ijtb

Sąlyga: naujas, Klanke Supercut roll slitter for efficient shredding of reject rolls. Isdpfen I Rgpex Af Ietb Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order. Price and further information available on request. We will be happy to provide you with a non-binding offer.

Gamybos metai: 1963, Sąlyga: paruoštas naudoti (naudotas), Lifting capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Isdpfsh I Edvox Af Ietb

Sąlyga: naudotas, Gamybos metai: 2021, veikimo valandos: 5 300 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, rotoriaus skersmuo: 800 mm, rotoriaus ilgis: 3 200 mm, galia: 310 kW (421,48 AG), sukimosi greitis (maks.): 100 aps./min, sukimosi greitis (min.): 20 aps./min, If interested, just inquire! Isdpsvt Suhofx Af Ijtb

Sąlyga: naudotas, rida: 10 500 km, galia: 220 kW (299,12 AG), pavaros tipas: mechaninis, kuro tipas: dyzelinas, spalva: geltonas, bendras svoris: 26 000 kg, sėdimų vietų skaičius: 1, pirmoji registracija: 07/2018, pakaba: kitas, veikimo valandos: 10 500 h, Įranga: ABS, kabina, oro kondicionavimas, priekabos jungtis, visų varančiųjų ratų pavara,

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: Ijdpfxevf E Ave Af Ijtb - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Complete solution for conveying bulk materials such as shredded material, wood chips, wood pellets, granulate, etc. Aluminium angled conveyor belt including substructure Horizontal section: 2,500 mm (customizable) Inclined section: 5,000 mm (customizable) Bend angle: 35°, 40°, or 45° Infeed height: horizontal (customizable) Discharge height: individually adjustable Design: height-adjustable (movable) Conveyor belt width: 500 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt including cleats and corrugated sidewall Drive: 1.1 kW motor (adjustable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive, etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Corrugated sidewall: 50x25 mm T-50 cleats – 400 mm pitch Isdpfxoi Igdfo Af Iotb 2-ply for exceptional transverse stability Permanently mounted overband magnetic separator: Permanent overband magnetic separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200 mm Magnetic area L: 700 mm, W: 250 mm Geared motor: 0.37 kW We always keep various systems of this type in stock. The delivery time for a customized system is currently approx. 2-3 weeks, depending on manufacturing requirements. Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop custom, individualized solutions and supply the associated systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator