Hidr. Paspauskite stabdį

HACO 3100 x 200 to

Sąlyga: naudotas, Lenkimo ilgis: 3100 mm Kwodpjru Unbsfx Af Ist Slėgis: 80 t Variklio galia: 5,5 kW Alyvos talpa: 100 l Konvencinė lenkimo staklės: 3100 x 80 t Mechaninis galinis atmušėjas

Sąlyga: geras (naudotas), NC Rotary Table with Motorized Drive Infinitely Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Total Height: 319 mm T-Slots: 7 pcs T-Slot Size: 22 H7 mm T-Slot Spacing: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optionally available with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in the sector of machining and milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: Kwjdpfx Asfr Ih Djf Ist - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernizations

Sąlyga: naujas, Pre-bending: 6.0 mm Kedpfx Ajd Ab H Hjf Iswt Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: geras (naudotas), Technical data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section/profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for tube and profile rolling Kwodpfx Afjwchn Uj Iot The seller is not liable for typing or data transmission errors. The machine's condition (appearance, technology, and wear) is consistent with its age; used machines are sold without any warranty.

Sąlyga: naujas, Pressing force: 40 t Bending length: 1270 mm Clearance between uprights: 980 mm Throat depth: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions (L x W x H): approx. 1950 x 1450 x 2100 mm Weight: approx. 3200 kg Accessories / Special Features: • Manual control for motorized depth adjustment and backgauge o Ball screw spindles o Fine adjustment via handwheel • Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly offset, R=0.8 mm, pressing load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backgauge with ball screw spindles, length = 600 mm • Single working speed of 10 mm/s for all vertical movements—no light curtain required! • Front support arms • Pendant control panel • Paint finish: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033 • Operating manual • CE compliant Delivery time: approx. 2–3 months after receipt of order plus pre-shipping charges China – Germany Ksdpfsgiud Hox Af Iewt Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Sąlyga: naujas, Machine in stock and immediately available Double Mitre Metal Bandsaw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre band saw with swiveling saw bow from left -45° to right +60° - Ideally suited for cutting pipes, profile materials as well as solid material made of stainless steel, iron, etc. in commercial applications - Large, heavy-duty cast saw arm for low-vibration operation - Two band speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder Kodpfx Afjd R Sipj Ijwt - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable saw band guides for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Vice with quick clamping device - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic cut-off - Base frame

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 810 mm, sukimosi skersmuo virš skersinio stumduko: 800 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 25 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 110 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 6 000 aps./min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing Diameter Over Bed: 800 mm Swing Diameter Over Cross Slide: 800 mm Maximum Turning Diameter: 320 mm Standard Turning Diameter: 200 mm Maximum Distance Between Centers: 1,130 mm Maximum Turning Length: 810 mm Maximum Workpiece Dimensions: 300 mm TRAVELS Turret Axis X1 & X2: 210 mm Turret Axis Y1 & Y2: +65 / -45 mm Kedpfxewlvlge Af Iswt Turret Axis Z1 & Z2: 810 mm Head Axis B2: 920 mm MAIN SPINDLE Maximum Spindle Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Machinable Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° SUBSPINDLE Maximum Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° FEED RATES Turret 1 Rapid Traverse X/Y/Z: 30/20/50 m/min Turret 2 Rapid Traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of Turrets: 2 Number of Tool Stations per Turret: 16 Turning Tool Shank Cross Section: 20 x 20 mm Max Boring Bar Diameter: 32 mm Turret Indexing Time (1 station): 0.18 s Max Speed of Driven Tools: 6,000 rpm Driven Tool Motor Power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Installation Area with Chip Conveyor: 5,120 x 2,720 mm Net Weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Interface for bar feeder • Gantry parts unloading arm • Tool load monitoring and load management system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 self-centering chucks, Ø 210 mm • 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacture: 2010

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Vieno spaudimo hotmelt klijavimo aparatas su: automatiniu viršelių padavimu Kwjdpoxdm Exsfx Af Iet

Sąlyga: naujas, Gamybos metai: 2023, Cutting diameter: 1100 mm Saw band length: 11000 x 67 mm Cutting width: 1.6 mm Cutting capacity at 90 degrees, square: 1100 x 1100 mm Cutting capacity at 90 degrees, flat: 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Space requirements: approx. 2800 x 1700 x 5200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. Kwedpfx Afjtq Dw Ee Ist This machine is available for immediate delivery. Chips are removed via a conveyor screw. A chip trolley approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be controlled forward and backward via the control panel. On the outfeed side there is a roller table measuring 1.40 x 1.00 meters. On the infeed side there is a motorized roller table measuring 2 x 1.40 meters. Optional Specifications - Motorized system for roller table - Laser line - Additional double roller table - PLC screen - Anti-vibration system The images are for orientation purposes only and do not represent a true-to-scale depiction of the machine.

Sąlyga: beveik kaip naujas (naudotas), tekėjimo skersmuo: 1 500 mm, MAXIMUM WORKPIECE DIAMETER: 1600 mm. MAXIMUM WORKPIECE LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND TROUBLE-FREE. Kwodjr Ui R Nopfx Af Iot ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.