Medienos rėmas drugelis stotis

H&M

Sąlyga: labai geros būklės (naudotas), SCM F520 CE Surface Planer Working width: 520 mm Motor power: 4 kW 4-knife cutterblock Standard knives Hydraulic adjustment of the worktable height Hfjdpfjndhdtex Af Iob Main fence adjustable up to 45 degrees Table length: 3000 mm CE certificate

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, stalčių skaičius: 30, EXTENDABLE RACK FOR GLASS PANEL STORAGE M80-30 YEAR OF MANUFACTURE 2025 / BRAND NEW We are a manufacturer of extendable racks for the storage of glass panels (crates with glass) and other sheet materials (sheet metal, sintered quartz, polycarbonate, furniture panels). Our racks are designed and manufactured entirely in-house at our facility in Poland. The materials used for the production of our racks come with relevant durability certificates and are subject to continuous quality control. The rack consists of extendable, slightly inclined drawers. This racking system allows for up to 75% savings in storage space, as all compartments are built parallel to each other and spaced just 10 millimeters apart. We offer rack versions in various dimensions and load capacities. Following consultation, we can also manufacture racks with custom specifications to meet your individual requirements. The drawer inclination depends on installation and can be set to the left or right. We particularly recommend these racks for glass factories, stonemasons, furniture manufacturers, and advertising workshops seeking efficient use of space. The racks are delivered as a kit for self-assembly. Assembly is straightforward; with our many years of experience, we have developed a well-designed product. With the included assembly instructions, putting the unit together is hassle-free. Our technical support team is always available to assist as needed. Should you prefer a technician to handle assembly, this can be arranged for a fee. TECHNICAL SPECIFICATIONS – RACK MODEL M80-30 Application: for individual glass panels up to 255 cm x 160 cm Maximum glass panel size: 275 cm x 170 cm Number of compartments: 30 Width of glass support rail: 8 cm Length of glass support rail: 308 cm Material supporting the glass panels: wooden board 308 cm x 8 cm x 2.5 cm Overall height (A): 218 cm Overall width (B): 436 cm Overall depth (C): 317 cm Required floor space for correct operation: 27 m² Hfsdpfx Ajha E S Tef Ijb Floor requirements: flat/level Number of bearings per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Rear wheel: ball bearing steel wheel / rolled on profile Colour: RAL 7040 (grey) Corrosion protection: steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Maximum total load: 27,000 kg Drawer inclination: left or right, depending on installation Assembly time: 14 hours Number of persons required for assembly: 2 DOCUMENTS SUPPLIED WITH RACK M80-30 - User manual - Assembly instructions - Data plate - Warranty: 12 months The product is delivered ready for immediate use. Our company supplies glass storage racks throughout the EU and to other countries as well.

Sąlyga: nepatikrintas (naudotas), Maximum milling length: 400 mm Maximum milling width: 150 mm Maximum clamping thickness: 25 mm Hydraulic motor: 2.2 kW 2 milling motors, each 2.2 kW Milling motor speed: 12,000 rpm Frequency converter: 8 kVA, 200 Hz Weight approx.: 1200 kg Output approx. 200 - 600 pcs/h, depending on shape and size Hfodpfx Aek Tyrwof Iob

Sąlyga: naujas, Gamybos metai: 2025, Lazerio šaltinis: Raycus arba Max: 4/6/8/12 kW Lazerio galvutė: 3 D BOCI Valdymo sistema: FSCUT 5000 A Griebtuvas: 20–450 mm Pakrovimas/iškrovimas: 12000 mm Hfodpfoi Apfzex Af Isb X-/Y-ašys Pozicionavimo tikslumas: ±0,05/1000 mm Kartotinumo tikslumas: ±0,03/1000 mm Pagreitis: 0,8g (m/s²) Sukimosi greitis: 60 aps./min Didžiausias pozicionavimo greitis: 60 m/min Didžiausias vamzdžio svoris: 1500 kg 1. Raycus 6000W lazerio šaltinis 2. Vamzdžių pjovimui pritaikyta nuožulni lazerio galvutė 3. Suvirinta rėmo konstrukcija DPL 4. Schneider elektros komponentai 5. Sraigtinis KH kreiptuvas 6. Techmech reduktorius 7. Yaskawa servovariklis 8. SHAC kreiptakiai 9. Integruota galios valdymo sistema 10. FScut 5000 programinė įranga 11. Integruotas elektrinis skydas 12. HANLI vandens aušintuvas 13. Konvejerinis portalo tipo X-ašies modulis FHBS 14. Automatinis atliekų surinkimas 15. Grandininio tipo automatinė ruošinių surinkimo sistema 16. Automatinė atramos sistema 17. Pakrovimo rėmas 12000 mm 18. Iškrovimo rėmas 12000 mm

Sąlyga: naujas, Mitre Saw Automatic UK-450 - Saw blade diameter: 450 mm - Processing length as per customer requirements - Automatic positioning - Automatic mitre angle adjustment (up to +/- 60°) - Suitable for processing wood, plastics, and aluminium - Infeed table as smooth feed track (optionally available as roller conveyor) Hfedpfx Afed A Ttxe Ieb Further technical details and specifications available upon request.

Sąlyga: naudotas, Gamybos metai: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400 V, Dyn5-11-1, IP23 or IP00, forced ventilation AF, Al/Al windings, temperature monitoring unit, fully functional, very good condition, 2 units available Hsdpfoquwtxjx Af Iefb

Sąlyga: naujas, Gamybos metai: 2024, slėgis: 8 juosta, Mitre adjustment horizontal 15°–90°–15° continuously variable, Saw motor 5.50 kW (400 Volt), Saw blade 600 mm, travel range rear stop 180 mm, working height adjustable from 940 to 1000 mm via leveling feet, 2 x extraction connections (top in hood and bottom), net weight 600 kg, dimensions (W x D x H): 135 x 140 x 150 cm, RAL 9007 grey aluminium. Turntable made from ground nickel-steel. Saw head with ball-type linear guides, offering high accuracy, long service life, and maximum rigidity. Saw material can be pre-clamped under low pressure when the hood is open. Hydropneumatic blade feed. Chip removal directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment continuously variable at 0º/45º/90º/–45º/–60º • Including 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Mist spray unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer Hfjdpfx Aegwt S Tef Ijb • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures that your workpieces are positioned at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, and the NC control positions the material automatically. The clamping and sawing process is then triggered. The positions are programmed into the controller beforehand. Once the machine has finished processing, it automatically moves to the next saw position. Depending on the workpiece, multiple parts can be clamped side by side or stacked and positioned simultaneously. You are welcome to inspect the system at any time in our manufacturing or demonstration hall. Please feel free to contact us for more information. Plantec Maschinen GmbH

Sąlyga: naujas, Gamybos metai: 2022, Power: 1.1 kW Drilling capacity in steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Number of speed steps: 9 Hfjdpfxogulr Hs Af Iob Spindle taper: MK-4 (Morse taper 4) Quill stroke: 120 mm Spindle centre-to-column distance: 254 mm Table size: 475 mm x 425 mm Drilling table tilt/swivel: 45° to the left / 360° rotation Column diameter: 80 mm Quick-action drill chuck: 1 - 16 mm Weight: 132 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: sn. 816, padavimo ilgis X ašis: 2 600 mm, padavimo eiga Y ašimi: 1 300 mm, bendras plotis: 4 000 mm, bendras ilgis: 3 600 mm, bendras aukštis: 3 500 mm, garantijos trukmė: 12 mėnesiai, pjovimo aukštis (maks.): 1 300 mm, vietos reikalavimas ilgis: 4 200 mm, reikalingas plotis: 4 500 mm, reikalingas aukštis: 3 600 mm, Polish manufacturer of machinery and equipment for cutting and processing polyurethane foam with over 25 years of experience is offering a brand-new automatic horizontal cutting machine for sale. Model: TYP PARK The machine features a robust and heavy-duty steel construction. Material cutting is performed by the movement of the cutting frame along the X and Y axes, while the worktable remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear guides along the X-axis. In the Y-axis (up and down movement of the frame), feed is effected by two ball screw drives and linear guides. The machine offers both single-sided and double-sided cutting modes, as well as automatic cut correction in double-sided operation. Machine equipment: - Automatic, self-adjusting saw blade tensioning - Stationary table with motorised conveyor belt for easy loading of material - Automatic cut length measurement - Quick-change system for the saw blade - Automatic material clamping Technical data: - Cutting width: 2100 mm - Cutting length: 2500 mm Hfsdjwq Dvdjpfx Af Ijb The machine is fully enclosed with a safety fence and equipped with safety light curtains in the loading and unloading areas. As the manufacturer, we offer installation and service within the EU. The machine is CE certified. In addition, our portfolio includes a wide range of machines and systems for cutting foam and mineral wool. We invite you to explore our product range.

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 625 mm, Hundegger joinery machine with automation 5 axes Working width: 625 mm with tools Hjdpfx Afsv Ubtcs Iefb