CNC tekinimo ir frezavimo centras

GILDEMEISTER GMX 250 linear

Sąlyga: geras (naudotas), Gamybos metai: 2008, veikimo valandos: 72 899 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07510001241, tekėjimo ilgis: 1 185 mm, tekėjimo skersmuo: 640 mm, veleno greitis (maks.): 12 000 aps./min, ruošinio svoris (maks.): 150 kg, bendras aukštis: 3 040 mm, bendras ilgis: 7 800 mm, bendras plotis: 4 100 mm, bendras svoris: 16 500 kg, valdiklių gamintojas: SIEMENS, valdiklio modelis: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - Slide travel X1: 550 mm - Slide travel Y1: 180 mm - Slide travel Z1: 1,185 mm - Slide travel B1: 240° - Slide travel X2: 180 mm - Slide travel Z2: 1,050 mm - Slide travel Z3: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse speed Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse speed Slide 2 (X/Z): 24/36 m/min - Rapid traverse speed Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 - Including tool holders mounted on the turret - Including bar loader, manufacturer: COCCHE GIOVANNI, model: CNC-DB 110, year: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Njdpeyaqczefx Af Iocl Attention, the machine has the following defects: - Hydraulic unit is faulty and needs to be repaired - The Q2 axis (tool changer milling spindle) fails frequently - X2 axis (guide rails) travels slightly misaligned - The guides and drives are worn consistent with age Note: A vehicle with a 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded on truck at a date to be coordinated end of February 2026.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 185 mm, tekėjimo skersmuo: 640 mm, veleno greitis (maks.): 4 000 aps./min, tekinimo skersmuo virš slankiojančio stalo: 640 mm, priešvertenio sukimo momentas (maks.): 5 000 Nm, Turning and Milling Center with Main and Counter Spindle, Fully Equipped! TECHNICAL DETAILS Turning Diameter: 640 mm Turning Length: 1,185 mm Swing Diameter: 640 mm Distance Between Spindle Heads: 1,500 mm CARRIAGE I X-Axis Travel: 550 mm Y-Axis Travel: 180 mm Z-Axis Travel: 1,185 mm B-Axis: 240° Feed Rate X-Axis: 0 - 40,000 mm/min Feed Rate Y-Axis: 1 - 24,000 mm/min Feed Rate Z-Axis: 1 - 70,000 mm/min Feed Rate B-Axis: 1 - 20 rpm Rapid Traverse X/Y/Z: 40 / 24 / 70 m/min Feed Force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool Holder: HSK 63 Milling Spindle Speed: 10 - 12,000 rpm Drive Power 100% Duty Cycle: 13.20 kW Drive Power 40% Duty Cycle: 22.00 kW Nodswyvc Uopfx Af Iecl Milling Spindle Torque: 60 / 100 Nm Max. Tool Length: 350 / 200 mm Tool Diameter: 80 mm Tool Diameter with 2 Free Slots: 120 mm Max. Tool Weight: 6 / 10 kg CARRIAGE II X-Axis Travel: 180 mm Z-Axis Travel: 1,050 mm Feed Rate X-Axis: 1 - 24,000 mm/min Feed Rate Z-Axis: 1 - 36,000 mm/min Rapid Traverse X + Z Axes: 24 / 36 m/min Feed Force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool Holder: DIN 69880 Ø40 Driven Tools - Number: 12 Speed: 1 - 4,000 rpm Drive Power 100% Duty Cycle: 10.70 kW Torque S1: 32 Nm CARRIAGE III Z-Axis Travel: 1,150 mm Feed Rate Z-Axis: 1 - 36,000 mm/min Rapid Traverse Z-Axis: 36 m/min Feed Force Z-Axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive Power 100% Duty Cycle: 36.00 kW Drive Power 40% Duty Cycle: 45.00 kW Torque at 40% / 100% Duty Cycle: 800 / 630 Nm Spindle Bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive Power 100% Duty Cycle: 21.00 kW Drive Power 40% Duty Cycle: 28.00 kW Torque at 40% / 100% Duty Cycle: 320 / 240 Nm Spindle Bore: 80 mm MACHINE DETAILS Electrical Data Total Connected Load: 70.00 kW Dimensions & Weight Machine Weight: approx. 20.00 t Space Requirement: approx. 8.50 x 4.50 x H3.10 m Control Control Manufacturer: Siemens Control Model: SINUMERIK 840D EQUIPMENT Chip Conveyor Oil Mist Separator DMG Automation WH10top Main Spindle ISM90: Hollow Clamping Device, C-Axis, 3-Jaw Power Chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter Spindle ISM76: Partial Hollow Clamping Device, C-Axis, 3-Jaw Power Chuck SMW-AUTOBLOK KNCS-NB-315-91 Workpiece Handling Unit with Integrated Conveyor Belt Automatic Safety Cover Differential Pressure Clamping With Coolant Pump Skid: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch Collet Chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece part extractor for turret

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 185 mm, tekėjimo skersmuo: 640 mm, veleno greitis (maks.): 4 000 aps./min, tekinimo skersmuo virš slankiojančio stalo: 640 mm, priešvertenio sukimo momentas (maks.): 5 000 Nm, Turning and Milling Center with Main and Counter Spindle, Fully Equipped! TECHNICAL DETAILS Turning Diameter: 640 mm Turning Length: 1,185 mm Swing Diameter: 640 mm Distance Between Spindle Heads: 1,500 mm CARRIAGE I X-Axis Travel: 550 mm Y-Axis Travel: 180 mm Z-Axis Travel: 1,185 mm B-Axis: 240° Feed Rate X-Axis: 0 - 40,000 mm/min Feed Rate Y-Axis: 1 - 24,000 mm/min Feed Rate Z-Axis: 1 - 70,000 mm/min Feed Rate B-Axis: 1 - 20 rpm Rapid Traverse X/Y/Z: 40 / 24 / 70 m/min Feed Force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool Holder: HSK 63 Milling Spindle Speed: 10 - 12,000 rpm Drive Power 100% Duty Cycle: 13.20 kW Drive Power 40% Duty Cycle: 22.00 kW Milling Spindle Torque: 60 / 100 Nm Max. Tool Length: 350 / 200 mm Tool Diameter: 80 mm Tool Diameter with 2 Free Slots: 120 mm Max. Tool Weight: 6 / 10 kg CARRIAGE II X-Axis Travel: 180 mm Z-Axis Travel: 1,050 mm Feed Rate X-Axis: 1 - 24,000 mm/min Feed Rate Z-Axis: 1 - 36,000 mm/min Rapid Traverse X + Z Axes: 24 / 36 m/min Feed Force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool Holder: DIN 69880 Ø40 Driven Tools - Number: 12 Speed: 1 - 4,000 rpm Drive Power 100% Duty Cycle: 10.70 kW Torque S1: 32 Nm CARRIAGE III Z-Axis Travel: 1,150 mm Feed Rate Z-Axis: 1 - 36,000 mm/min Rapid Traverse Z-Axis: 36 m/min Feed Force Z-Axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive Power 100% Duty Cycle: 36.00 kW Drive Power 40% Duty Cycle: 45.00 kW Torque at 40% / 100% Duty Cycle: 800 / 630 Nm Spindle Bore: 80 mm Ncedpfx Afexf A Edj Iol COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive Power 100% Duty Cycle: 21.00 kW Drive Power 40% Duty Cycle: 28.00 kW Torque at 40% / 100% Duty Cycle: 320 / 240 Nm Spindle Bore: 80 mm MACHINE DETAILS Electrical Data Total Connected Load: 70.00 kW Dimensions & Weight Machine Weight: approx. 20.00 t Space Requirement: approx. 8.50 x 4.50 x H3.10 m Control Control Manufacturer: Siemens Control Model: SINUMERIK 840D EQUIPMENT Chip Conveyor Oil Mist Separator DMG Automation WH10top Main Spindle ISM90: Hollow Clamping Device, C-Axis, 3-Jaw Power Chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter Spindle ISM76: Partial Hollow Clamping Device, C-Axis, 3-Jaw Power Chuck SMW-AUTOBLOK KNCS-NB-315-91 Workpiece Handling Unit with Integrated Conveyor Belt Automatic Safety Cover Differential Pressure Clamping With Coolant Pump Skid: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch Collet Chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece part extractor for turret