Hidarulinis presas

Gidropress P315

Hydraulic frame press for punching sheet metal with a force of 630 tons, designed for cold forming.

Iiodpfx Aopgkt Sscueh
The vertical, welded frame press consists of a table and an upper plate, which are bolted together. A control cabinet is installed next to the press, and a deep-set oil overflow tank in the foundation makes filling the press unit with oil easier. The press units are removable, facilitating installation and maintenance.

The press is operated via push button. The stroke length of the slide is adjusted by setting the position of the end stop.

Technical data:

1. Rated pressing force, tons: 630
2. Rated working pressure of fluids, kN/cm: 2,200
3. Slide stroke, mm: 750
4. Slide speed, mm/s
a) at idle speed: 215
b) during working stroke: 10
c) on return stroke: 120
5. Maximum distance between table and slide: 1,400 mm
6. Distance between uprights, mm: 2,200
7. Table dimensions, mm
a) left to right: 2,220
b) front to back: 1,800
8. Thickness of forming plate, mm: 220
9. Table height above floor, mm: 410
10. Rated force of hydraulic cushion, tf: 250
11. Hydraulic cushion stroke, mm: 350
12. Ejector speed, mm/s
a) upward stroke: 51
13. Press dimensions, mm
a) left to right: 5,070
b) front to back: 3,000
c) height: 7,065
14. Height of press above floor, mm: 5,480
15. Press weight, kg: 69,400

Motor speed: 1,450 min⁻¹
Operating voltage: 400/230 V
Mains frequency: 50 Hz ± 1%
Rated air pressure: 0.7 Pa

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.