Juostinis pjūklas - horizontalus

GERD WOLFF KSY 550 X 700

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. Itjdpsfg E Hpsfx Af Isb • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naudotas, Gamybos metai: 2007, pjovimo plotis (maks.): 1 060 mm, pjovimo aukštis (maks.): 1 060 mm, Bandsaw Kasto HBA 10×12 Year of manufacture 2007 Cutting ranges: Round cutting area: 1,060 mm Square cutting area: 1,060 x 1,060 mm Flat cutting area: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Minimum workpiece dimension: approx. Ø 300 mm Minimum cut length: 10 mm Minimum remnant length (single cut): 20 mm Minimum remnant length (automatic operation): 100 mm Table load capacity max. 50 tons Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed infinitely variable at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force of machine vice: 50,000 N Itedpfx Aewk D Efof Iob Saw blade dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: via easily replaceable brush, motor-driven This offer is exclusively for commercial customers as defined by §14 BGB No sale to private individuals

Sąlyga: naujas, Gamybos metai: 2023, Cutting diameter: 1100 mm Saw band length: 11000 x 67 mm Cutting width: 1.6 mm Cutting capacity at 90 degrees, square: 1100 x 1100 mm Cutting capacity at 90 degrees, flat: 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Space requirements: approx. 2800 x 1700 x 5200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor screw. A chip trolley approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be controlled forward and backward via the control panel. On the outfeed side there is a roller table measuring 1.40 x 1.00 meters. On the infeed side there is a motorized roller table measuring 2 x 1.40 meters. Optional Specifications - Motorized system for roller table - Laser line - Additional double roller table - PLC screen - Anti-vibration system Iodpfx Aotq Dw Esf Ietb The images are for orientation purposes only and do not represent a true-to-scale depiction of the machine.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator Isdpfxsfg E Hls Af Ietb - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Semi-automatic band saw for cutting solid bars and medium-sized profiles with high efficiency and excellent cutting precision. The robust structure provides the machine with the required rigidity and precision to the cutting group. The band drive is powered by a two-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Properly sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide (Widia) plates. Blade tension achieved via an electromechanical device with blade rotation microswitch control. Safety devices against accidents on the flywheel cover guard and the blade. Cutting thickness 1.5 mm. Cutting range 60° left / 60° right. Adjustable stop for repetitive cuts of the same length. Blade cleaning device with brush. Hydraulic power unit motor 0.37 kW. Electric pump 0.09 kW for band cooling. Vice jaw height 200 mm. Vice jaw length 185 mm. Itedpfofibd Tjx Af Iob Working table height 760 mm. Machine weight 820 kg.

Sąlyga: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Iodpfxsd Iipmo Af Ietb Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Sąlyga: naudotas, Gamybos metai: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6750 rpm Table: 1370 x 254 mm Itjdpfot U Rm Ijx Af Ieb Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (x) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunction Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive with frequency inverter "Made in Germany" and digital 3-axis position indicator DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity accuracy due to tapered roller bearings, less than 0.01 mm measured in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant device. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse (Z-axis). Equipment details: - Frequency inverter quality Made in EU - Drilling/Milling head tilt ±45˚ - Overhang 200–680 mm - Spindle speeds - Infinitely variable speed regulation - Particularly wide speed range - Drilling depth stop, adjustable with millimetre scale, front-reading - Safety screen, height adjustable and generously sized - Cross table, solid, generously sized, precisely surface machined - Motorized table height adjustment Z-axis - Adjustable end stops - OPTI control panel, integrated switch panel - Integrated digital position display DPA 21 with speed display - X-axis: motorized table feed, stepless speed regulation, rapid traverse, forward/reverse rotation Technical data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total connected load: 4 kW Electrical voltage: 400 V Phase(s): 3 Ph AC power supply, supply frequency: 50 Hz Maximum face mill size: 100 mm Maximum end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range Number of speed ranges vertical spindle: 8 Vertical spindle speed control: electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle to horizontal milling table, min.: 40 mm Distance vertical spindle to horizontal milling table, max.: 446 mm Horizontal table T-slot size: 16 mm Horizontal table T-slots: number 3 Horizontal table T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle drive motor (normal operation): 3 kW Coolant pump(s) drive motor: 100 W X-axis travel (manual): 930 mm Y-axis travel (manual): 400 mm Z-axis travel (manual): 406 mm X-axis travel (automatic): 850 mm Z-axis travel (automatic): 350 mm Drilling capacity steel (S235JR): 32 mm Permanent drilling capacity steel (S235JR): 28 mm Vertical spindle swing range, milling head Z-X plane: +/- 45 degrees Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas), Complete set incl. single and dual foot remote control Digital display for speed Hydraulic height adjustment Dimensions: - Tilted height min: 800 mm - Tilted height max: 1900 mm Itedpfx Ajm Ew Stof Ieb - Horizontal height min: 1050 mm - Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed from 0.01 to approx. 0.7 rpm.

Sąlyga: geras (naudotas), Gamybos metai: 1990, pjovimo plotis (maks.): 1 000 mm, pjovimo aukštis (maks.): 140 mm, stalo ilgis: 1 400 mm, galia: 5,5 kW (7,48 AG), Types: F 45, Machine no.: 90-8-86 Iedpfxetxh Nie Af Ijtb

Sąlyga: naudotas, Primultini ketaus juostinis pjūklas su 100 cm skersmens volu, pakreipiamu stalu, maksimalus darbinis stalo pralaidumas 90 cm. Variklio galia 10 AG. Naudotas. Itsdstq Dl Tepfx Af Iob