Žirklinis keltuvas

Genie GS4069RT

Sąlyga: naudotas, Gamybos metai: 2020, bendras ilgis: 3 740 mm, - Maximum working height: 14.3 m - Maximum platform height: 12.30 m - Platform height, stowed: 1.65 m - Platform length, external: 2.79 m - Platform extension length: 1.52 m - Maximum number of persons on platform (indoor/outdoor): 4/4, 4/2, 3/2 - Load capacity: 363 kg - Load capacity with extended platform: 136 kg - Drivable at full platform height: 12.3 m - Drive speed, stowed: 5.6 km/h - Drive speed, raised: 0.5 km/h - Gradeability, stowed: 35% - Turning radius (inside/outside): 2.11 m / 4.6 m - Lift/lower time: 61/28 sec - Tilt sensor activation (longitudinal/lateral axis): 3° / 2° Kedpfx Aoxpx Tfof Ijwt - Leveling with maximum outriggers (longitudinal/lateral axis): 5.3° / 11.7° - Drive type: Diesel - Fuel tank capacity: 37.9 L - Hydraulic system tank capacity: 68.1 L - Maximum tire load: 1,737 kg - Tire contact pressure (front, fully extended platform): 657 kPa - Floor load: 10.29 kPa - Sound pressure level (ground): 85 dBA - Sound pressure level (platform): 79 dBA - Vibration: < 2.5 m/s²

Gamybos metai: 2020, Sąlyga: visiškai atnaujintas (naudotas), 2 semi-gantry cranes for indoor operation extendable to full gantry crane span approx. 8.5 m hook travel approx. 6.0 m Kodpsmdrt Ssfx Af Ijwt DEMAG single-girder trolley floor control

Sąlyga: naudotas, Gamybos metai: 2020, bendras ilgis: 3 740 mm, - Maximum working height: 14.3 m - Maximum platform height: 12.30 m - Platform height, stowed: 1.65 m - Platform length, external: 2.79 m - Platform extension length: 1.52 m - Maximum number of persons on platform (indoor/outdoor): 4/4, 4/2, 3/2 - Load capacity: 363 kg - Load capacity with extended platform: 136 kg - Drivable at full platform height: 12.3 m - Drive speed, stowed: 5.6 km/h - Drive speed, raised: 0.5 km/h - Gradeability, stowed: 35% - Turning radius (inside/outside): 2.11 m / 4.6 m - Lift/lower time: 61/28 sec - Tilt sensor activation (longitudinal/lateral axis): 3° / 2° - Leveling with maximum outriggers (longitudinal/lateral axis): 5.3° / 11.7° - Drive type: Diesel - Fuel tank capacity: 37.9 L - Hydraulic system tank capacity: 68.1 L - Maximum tire load: 1,737 kg - Tire contact pressure (front, fully extended platform): 657 kPa - Floor load: 10.29 kPa - Sound pressure level (ground): 85 dBA Kwjdpfx Aoxpx Ivjf Ijt - Sound pressure level (platform): 79 dBA - Vibration: < 2.5 m/s²

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 88 h, keliamoji galia: 363 kg, kėlimo aukštis: 12 000 mm, kėlimo galia: 363 kg/m, platformos ilgis: 2 790 mm, platformos plotis: 1 600 mm, bendras svoris: 5 039 kg, transporto ilgis: 3 120 mm, transporto plotis: 1 750 mm, transporto aukštis: 2 740 mm, kuro tipas: hibridas, spalva: mėlyna, Įranga: UVV saugos patikra, === MAIN SPECIFICATIONS === Year of manufacture: 2018 Operating hours: 88 h Machine width: 1.75 m Drive: 4x4 Drivable at full height: Yes Platform extension: Yes Rated power: 19.4 kW (Perkins 403D-11 diesel) Working height: 14.02 m Platform capacity: 363 kg Power source: Diesel Automatic outriggers: Yes Platform dimensions: 2.79 × 1.60 m (extendable to 4.31 m) Tyres: Foam-filled all-terrain tyres CE certified: Yes Machine weight: 5,039 kg Application area: Outdoor === HIGHLIGHTS === Carefully selected from reliable and traceable sources CE certification and complete documentation included Ready for immediate use and availability Comprehensive technical documentation available === CONDITION === Excellent condition – Demonstration machine with only 88 operating hours Kwodjxdampepfx Af Iet Original blue paintwork, very well maintained Immediately available ex stock Sittard === LOCATION & DELIVERY === Location: Sittard, Netherlands Worldwide shipping possible Price: €23,450 (EXW, plus VAT) The Genie GS-4069 RT scissor lift combines electric and diesel-powered operation for maximum flexibility. Equipped with 4WD, automatic levelling, and a working height of 14.1 m – ideal for construction and maintenance works on uneven terrain. This demonstration machine from 2018 is fully CE-certified, tested, and in excellent condition. Professional technical support and spare parts available upon request. === DELIVERY === Crane loading available upon request for smooth transport Flexible transport solutions according to destination and logistic requirements All transport is professionally handled by the Collé Rental & Sales logistics team

Sąlyga: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Kwodpfx Afohrnbks Iet Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, SLITTLINIE — OME 1. MATERIAL: Bänder — Warmwalz-, Kaltwalz- und verzinkte Coils 2. DICKE: Warmgewalzt: 1,5–5 mm Kaltgewalzt: 1,25–3 mm Verzinkt: 1,25–4 mm 3. COILBREITE: 500–1550 mm Ksdpjvupk Asfx Af Iowt 4. MAX. COILGEWICHT: 22 t 5. INNENDURCHMESSER COIL: 500–820 mm (Abwickler mit Doppelkonus) 6. AUßENDURCHMESSER COIL: 1.800 mm 7. INNENDURCHMESSER STREIFEN: 508 mm 8. SCHNITTGENAUIGKEIT STREIFEN: ±0,2 mm 9. MINDESTE BANDSTREIFENBREITE: 41 mm MAXIMALE BANDSTREIFENBREITE: 1.490 mm 11. Anzahl der Streifen: Streifenbreite 1–2 mm: bis zu 15 Streifen Streifenbreite 2–3 mm: bis zu 9 Streifen Streifenbreite 4–5 mm: bis zu 6 Streifen 12. MINIMALE BESCHNEIDUNG: Blechdicke 1,25–3,85 mm: 10 mm (2x5 mm) Blechdicke 4–5 mm: 13 mm (2x6,5 mm)

Sąlyga: naujas, The Servoturn 500/2000 is a state-of-the-art universal lathe in the category of conventional turning machines and belongs to the product group of servo lathes. This machine combines advanced feed technology with proven mechanical engineering, making the switch to servo-conventional turning machines both more attractive and economical. Equipped with high-performance servo motors and ball screw drives on all axes, the Servoturn 500/2000 offers precise control of feeds and thread pitches without the need for change gears or gearboxes. Its intuitive operation allows you to conveniently select feeds and thread pitches via rotary switches. Standard features such as a 3-axis position display and a quick-change tool post significantly increase your productivity. KNUTH machines are renowned for their high repeatability and stability. You will appreciate the flexibility and outstanding surface finish, comparable to CNC lathes. Discover the advantages of the Servoturn 500/2000 and place your order today! Kwsdpfx Afsl Iy Sxe Ist

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, veikimo valandos: 2 423 h, mašinos/transporto priemonės numeris: YGC0D180TE0005007, keliamoji galia: 215 kg, kėlimo aukštis: 18 000 mm,

Sąlyga: naudotas, Gamybos metai: 1968, Roller diameter: 500 mm Kodpeiqp Erofx Af Iewt Throat depth: 1050 / 485 mm Workpiece height: 300 mm Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table area: 750 x 800 mm Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight approx. 1750 kg Space requirement approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle - Mitre adjustment via lockable indexing every 15° - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band breakage monitoring system - Smooth-running saw carriage guided by preloaded linear ball guides - Additional table 450 x 450 mm - Machine lamp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. The machine has been tested but not put into production. It has operated for 50 hours. It is designed for forming cold-rolled open or closed profiles, laser-welded. The input material for profile production consists of black or galvanized steel strips. Component elements (serial numbers according to technical documentation): 1 - Uncoiler Soprem H1250/D/1700ZR, serial number: 20140388/1, year of manufacture: 2014 2 - End joiner/welder Soprem CH-2540, serial number: 20140388/2, year of manufacture: 2014 3 - Multi-roll forming machine Dreistern RS616, serial number: 15773, year of manufacture: 2015 - Base frame, serial number: not available, year of manufacture: not available - Gearbox unit P60/80/90, serial number: not available, year of manufacture: not available Kwjdpfx Afsxz Tuus Iot - Drive with servomotor, serial number: not available, year of manufacture: not available - Dreistern P60 forming, embossing, and perforating stands, serial number: not available, year of manufacture: not available - 3 x Dreistern roll forming tools RC1500, RC1501, RC1502, serial number: not available, year of manufacture: not available 4 - Laser Trumpf TruLaser Cell 1100, serial number: S1200C0090, year of manufacture: 2014 5 - Cutting machine Dreistern TS214.10, serial number: 15122, year of manufacture: 2015 - Circular saw Dreistern S 200.10, serial number: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system