SKERSMENS 100 MM GREITAS PJOVIMO DISKINIS Pjūklas

GELİŞİM GLS - 100

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Itsdpfxsfg E Hpe Af Ijb Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naujas, Gamybos metai: 2025, juostinio pjūklo ilgas: 3 920 mm, pjūklo juostos plotis: 34 mm, Double Column Bandsaw Fully Automatic Everising H-260 HB Cutting range round: 0 - 260 mm Cutting range square: 300 x 260 mm Bundle clamping width: 145 – 190 mm Bundle clamping height: 30 – 130 mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1 mm Weight: 1,759 kg Machine dimensions: 2170 x 2100 mm The standard equipment of the machine includes: • Heavy-duty steel construction in double-column design • NC feed system • Frequency-controlled cutting speed (stepless, inverter-controlled) • Digital cutting speed display • Double horizontal hydraulic vices • Hydraulic saw blade tensioning • Saw blade guides (including back guide) made of carbide • Hydraulically preloaded blade guides • Precision PLC control for all hydraulic and electric components • Piece counter with automatic shut-off • Automatic end-of-stock shut-off • Multi-job function • Bundle clamping device • Powered chip brush • Automatic blade break detection incl. emergency stop • Chip wash-down gun Iedpoq Ulxysfx Af Ietb • Flexible work light • 2-meter roller track • Toolbox • Carbide functionality Special equipment included: • Variable clamping pressure reduction • Cut deviation control Comprehensive complete German documentation.

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base Itsdpfxsd N H A Ne Af Ijb - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Sąlyga: naudotas, Gamybos metai: 2019, Swing diameter 400 mm Turning length 584 mm Swing over bed 750 mm Control Siemens 828 D Shop Turn Spindle bore 81 mm Spindle speed: 3500 rpm Spindle drive 18.5/22 kW Spindle torque 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Speed of driven tools 5000 rpm Milling spindle drive: MK 5 kW y-axis +/- 60 mm Rapid traverse 30/30/10 m/min Tailstock MK 5 Dimensions (L x W x H) 4.6 x 1.9 x 2.1 m Itsdpfx Afsww Naze Iob Machine weight approx. 6.65 t Flat-bed CNC lathe with driven tools and Y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in the door - Signal lamp - 2 + 2 driven tool holders - Various fixed tool holders - Flat guideway - Tool measuring arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping

Sąlyga: geras (naudotas), Gamybos metai: 2001, Manufacturer: BEHRINGER Model: HBP 530 A Year of manufacture: 2001 Specifications Metric US Standard Capacity 90° 530 x 530 mm Min. cutting length 40 mm Max. cutting length 17 - 110 mm Ijdpfxeu U Nars Af Istb Power 12 kW Chip conveyor Yes Dimensions (approx.): Length 4000 mm Width 2250 mm Height 3270 mm Weight 4400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith; however, accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Įrankių laikiklis: VDI 30 Įrankių revolveris: 12 pozicijų Pagrindinės ašies greitis: 5 000 aps./min. Variklio galia: 16,5 kW Įskaitant strypų padavėją Iodpfx Afsx Nnbhj Ijtb Įskaitant dokumentaciją

Gamybos metai: 2013, Sąlyga: naudotas, Cutting diameter: 420 mm Saw blade length: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Band speed: 17 - 110 m/min Saw motor: 7.5 kW Iedsd Izmaopfx Af Iotb Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw including round bar magazine and unloading gripper, designed for sawing round bars from 50 to 420 mm. The magazine features 6 storage compartments, each with a maximum bar weight capacity of 3,400 kg. Cutting lengths range from 20 to 1000 mm. Like-new condition, approximately 1,000 operating hours.

Sąlyga: naudotas,

Sąlyga: naudotas, Gamybos metai: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotational movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 – 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total connected load: 35 kVA Machine weight: approx. 10 t Space requirement: approx. 4.5 x 2.8 x 2.5 m Itedpfotv H Ucsx Af Isb The machine was completely overhauled by the manufacturer in 1994, including: - new electrical cabinet - new BOSCH servo drives and Heidenhain TNC 360 control (3D control) - facing slide Ø 600 mm, travel: 150 mm The machine is currently not ready for demonstration due to an electrical fault.

Sąlyga: paruoštas naudoti (naudotas), Įranga susideda iš: - 3 Elba atraitų nuėmėjų, kurių talpa 5 t - 1500 mm - Tiesinimo blokas RAS 26.45 - RAS kampų išpjovimo blokas - RAS hidraulinis blokas standumo briaunų ridenimui metale - RAS žirklės ilgiui kirpti RAS 82.16 - RAS lenkimo staklės Greitis: 15 m/min Galia: 16 kW Itedpfjwwbf Njx Af Iob