Įvairūs

Gallus TCS 250

The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing machine designed for efficiency and precision. Featuring a 265 mm format and a total print count of 2 million impressions, this machine is currently in stock and located in Germany.

This unit is equipped with a range of advanced features to meet various printing requirements. It operates at a speed of 11,000 prints per hour with a cylinder circumference of 254 mm, corresponding to a web width of 265 mm. The hot foil stamping speed reaches 8,000 cycles per hour, with a maximum print width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in 0.01 mm increments. The main unit operates at 400 V, while peripheral devices use 230 V, both at a mains frequency of 50 Hz.

Key features include a feeder section with web cleaning, corona pre-treatment for improved adhesion, and trim/suction functionalities. The press can handle paper from 80 to 180 g/m² and board up to 300 g/m² with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesives and supports UV offset printing. The configuration consists of 4 printing units, 1 coating unit, 1 rotary die-cutting unit, and a rotary hot foil stamping unit.

Additional highlights include web inspection via the manual Powerscope 4000 system, a water-cooled Uviterno Coldstar UV drying module, 4 edge trimmers, web tension monitoring, and an IR dryer. The maximum web diameter is 800 mm. The machine also offers remote maintenance capability, a plate tool, and maintenance tools for straightforward operation and servicing.

Specification: 265 mm format
Pedpfx Aovfx A Ajhcerb

Equipment details:
Speed: 11,000 sheets/h
Cylinder circumference: 254 mm
Web width: 265 mm
Hot foil stamping speed: 8,000 cycles/h
Max. print width: 265 mm
Min. print width: 130 mm
Format length division: 0.01 mm
Machine voltage: 400 V
Peripheral voltage: 230 V
Frequency: 50 Hz
Web cleaning at feeder
Corona pre-treatment
Trimming and suction
Paper: 80 to 180 g/m²
Board: up to 300 g/m², max. 0.3 mm thickness
Adhesives: commercially available
UV offset printing
Printing units: 4
Coating units: 1
Rotary die-cutting units: 1
Rotary hot foil stamping unit
Web inspection
Inspection system: Powerscope 4000 manual
Drying module: Uviterno Coldstar
Water-cooled
IR or UV: UV
Trim knives: 4
Web tension control
IR dryer
Max. web diameter: 800 mm
Remote maintenance
Plate tool
Maintenance tools

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.