Keturių pusių obliavimo, apklijavimo mašina, Gabb

Gabbiani GS 160/10

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, 1 overhauled Paul slat separator, 2-slat design, Hedpfetx A Sxex Ag Eenp right fixed slat, left movable slat (for left-handed machine) Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm For max. timber length: 5.00 m 8 driven spiral rollers and 3 driven, smooth rollers. 11 rollers removed and fitted with new ball bearings. Movable slat runs smoothly on 4 ball-bearing mounted supports, equipped with a new roller chain and 11 new guide wheels. Sturdy sheet metal lining between all rollers. As-new condition.

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW Hsdpfsrigxysx Ag Esnp - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, supplied with documentation, has been regularly maintained. Hedpfx Agoi E Trpj Esnp

Būklė: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Hnodpfx Agsv Si Szs Eop Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table Hnedehlp D Nspfx Ag Eep - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Būklė: naujas, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface treatment - Quick and easy conversion from sanding to brushing Hnjdowzzivopfx Ag Eop - Wide range of brushes available for various effects and processing solutions - Infinitely variable feed and drum speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592 x 530 mm Table extension dimensions (2x): 582 x 245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010 x 1060 x 1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for used-look finishing and a pronounced grain effect

Būklė: naudotas, Gamybos metai: 1999, Diskinio pjūklo skersmuo: 275 mm Pjovimo sritis prie 90°: apvalus 80 mm Pjovimo sritis prie 90°: kvadratas 70 mm Hnedpel R Nnnsfx Ag Eep Pjovimo sritis prie 90°: plokščias 100 x 60 mm Pjovimo sritis prie 45°: apvalus 70 mm Pjovimo sritis prie 45°: kvadratas 60 mm Pjovimo sritis prie 60°: plokščias 80 x 50 mm Spaudimo sritis: 110 mm Sūkių dažnis: 45 / 90 aps./min Bendras galios poreikis: 0,5 kW Staklių svoris: apie 0,07 t Užimama vieta: apie 900 x 700 x 1600 mm Rankinis šalto diskinis pjūklas su: - Staklių pagrindas - Atraminė liniuotė 1500 mm

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Hnsdpfxefxpbms Ag Esp

Būklė: naudotas, Twin edger TRAK-MET PTF2-4, year 2022, like new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 blades, 1150 kg Subject to prior sale, errors and misprints excepted. Hjdpfxevr I H De Ag Eonp

Būklė: naudotas, Adhesive application Glue application Adhesive spreading - Glue application for package heights up to 300mm using 1 application roller - Driven by a 0.37 kW worm gear motor - 1 piece left - 1 piece right - Suitable for DIMTER HK 200 and HK 400 DIMTER spare parts DIMTER accessories Hodpfx Agocht Nyo Esnp